$ 1585/MT
- Density: 1.11 g/cc
- Water Absorption: 1.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Water Absorption at Saturation: 8.5 %
- Linear Mold Shrinkage: 0.014 cm/cm
$ 1476/MT
- Density: 1.14 g/cc
- Water Absorption: 1.8 %
- Moisture Absorption at Equilibrium: 2.8 %
- Water Absorption at Saturation: 9.6 %
- Linear Mold Shrinkage: 0.012 cm/cm
$ 1872/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Hardness, Rockwell R: 116
- Tensile Strength, Ultimate: 68.0 MPa
- Elongation at Break: 40 %
$ 1762/MT
- Density: 1.29 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength, Ultimate: 59.0 MPa
- Elongation at Yield: 18 %
- Flexural Modulus: 3.70 GPa
$ 1640/MT
- Density: 1.35 g/cc
- Water Absorption: 0.26 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength, Ultimate: 83.0 MPa
- Elongation at Break: 5.0 %
$ 1556/MT
- Density: 1.47 g/cc
- Hardness, Rockwell R: 121
- Tensile Strength, Yield: 96.4 MPa
- Elongation at Break: 2.0 %
- Flexural Modulus: 6.60 GPa
$ 2209/MT
- Density: 1.25 g/cc
- Water Absorption: 0.12 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 69.0 MPa
- Elongation at Break: 6.0 %
$ 1576/MT
- Density: 1.34 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Yield: 145 MPa
- Elongation at Break: 4.0 %
- Flexural Modulus: 7.00 GPa
$ 1474/MT
- Density: 1.37 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Hardness, Rockwell R: 120
- Tensile Strength, Ultimate: 179 MPa
$ 1949/MT
- Density: 1.17 g/cc
- Tensile Strength, Yield: 90.0 MPa
- Elongation at Break: 6.0 %
- Flexural Modulus: 3.60 GPa
- Izod Impact, Notched: 1.33 J/cm
$ 1618/MT
- Density: 1.55 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength, Yield: 152 MPa
- Elongation at Break: 2.2 %
$ 2103/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 1.5 g/10 min
- Tensile Strength, Yield: 41.0 MPa
- Tensile Modulus: 2.241 GPa
$ 1975/MT
- Density: 1.25 g/cc
- Water Absorption: 0.12 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Yield: 66.0 MPa
- Elongation at Break: 7.0 %
$ 1810/MT
- Density: 1.14 g/cc
- Water Absorption: 1.2 %
- Water Absorption at Saturation: 8.5 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Rockwell R: 118
$ 2314/MT
- Density: 1.16 g/cc
- Water Absorption: 1.2 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 120
- Tensile Strength, Ultimate: 90.0 MPa
$ 1708/MT
- Density: 1.03 g/cc
- Water Absorption: 0.30 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 0.40 g/10 min
- Hardness, Rockwell R: 95
$ 2236/MT
- Density: 1.06 g/cc
- Water Absorption: 0.37 %
- Water Absorption at Saturation: 2.8 %
- Linear Mold Shrinkage: 0.011 cm/cm
- Tensile Strength, Yield: 46.0 MPa
$ 1670/MT
- Density: 1.45 g/cc
- Tensile Strength, Ultimate: 131 MPa
- Elongation at Break: 3.0 %
- Flexural Modulus: 8.60 GPa
- Izod Impact, Notched: 0.850 J/cm
$ 1861/MT
- Density: 1.28 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Hardness, Rockwell R: 120
- Tensile Strength, Yield: 90.0 MPa
$ 2410/MT
- Density: 1.35 g/cc
- Water Absorption: 0.26 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength, Ultimate: 107 MPa
- Elongation at Break: 5.0 %
$ 2106/MT
- Density: 1.06 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 1.06 g/10 min @Load 3.80 kg, Temperature 235 °C
- Tensile Strength, Ultimate: 48.0 MPa
$ 2047/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Moisture Absorption at Equilibrium: 2.6 %
- Water Absorption at Saturation: 9.3 %
- Linear Mold Shrinkage: 0.0090 cm/cm
$ 1638/MT
- Density: 1.49 g/cc
- Hardness, Rockwell R: 121
- Tensile Strength, Yield: 83.0 MPa
- Elongation at Break: 10 %
- Flexural Modulus: 4.70 GPa
$ 1564/MT
- Density: 1.13 g/cc
- Water Absorption: 1.5 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Rockwell R: 117
- Tensile Strength, Ultimate: 75.8 MPa
$ 1873/MT
- Density: 1.31 g/cc
- Water Absorption: 1.0 %
- Moisture Absorption at Equilibrium: 1.8 %
- Water Absorption at Saturation: 6.2 %
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 2293/MT
- Density: 1.22 g/cc
- Tensile Strength, Ultimate: 97.0 MPa
- Elongation at Break: 3.0 %
- Flexural Modulus: 4.00 GPa
- Izod Impact, Notched: 1.23 J/cm
- Melting Point: 185 °C
$ 1653/MT
- Density: 1.16 g/cc
- Water Absorption: 0.50 %
- Linear Mold Shrinkage: 0.0075 cm/cm
- Tensile Strength, Ultimate: 86.0 MPa
- Elongation at Break: 9.0 %
$ 1717/MT
- Density: 1.12 g/cc
- Water Absorption: 1.9 %
- Water Absorption at Saturation: 9.6 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Hardness, Rockwell R: 118
$ 1911/MT
- Density: 1.37 g/cc
- Water Absorption: 1.1 %
- Hardness, Rockwell R: 119
- Tensile Strength, Ultimate: 162 MPa
- Elongation at Break: 3.0 %
$ 1571/MT
- Density: 1.23 g/cc
- Water Absorption: 0.90 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 83.0 MPa
$ 1766/MT
- Density: 1.09 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 46.0 MPa
- Flexural Strength: 70.0 MPa
$ 1923/MT
- Density: 1.08 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 45.0 MPa
- Elongation at Yield: 40 %
$ 1695/MT
- Density: 1.04 g/cc
- Tensile Strength, Ultimate: 48.0 MPa
- Elongation at Break: 400 %
- Flexural Modulus: 0.690 GPa
- Izod Impact, Notched: 10.7 J/cm
$ 2015/MT
- Density: 1.34 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 103 MPa
- Elongation at Break: 3.0 %
- Flexural Modulus: 5.50 GPa
$ 1567/MT
- Density: 1.21 g/cc
- Water Absorption: 1.4 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 119
- Tensile Strength, Ultimate: 110 MPa
$ 1719/MT
- Density: 1.06 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 67.0 MPa
- Flexural Strength: 103 MPa
$ 1496/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Melt Flow: 8.0 - 11 g/10 min
- Tensile Strength, Yield: 62.0 MPa
$ 1528/MT
- Density: 1.06 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 114
- Tensile Strength, Ultimate: 44.0 MPa
$ 2206/MT
- Density: 1.06 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 114
- Tensile Strength, Ultimate: 44.0 MPa
$ 1860/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength, Yield: 48.0 MPa
- Elongation at Break: 125 %
$ 1448/MT
- Density: 1.35 g/cc
- Tensile Strength, Yield: 152 MPa
- Elongation at Break: 3.0 %
- Flexural Modulus: 6.80 GPa
- Izod Impact, Notched: 1.17 J/cm
$ 1586/MT
- Density: 1.07 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 55.0 MPa
$ 1584/MT
- Density: 1.28 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Tensile Strength, Ultimate: 112 MPa
- Elongation at Break: 5.0 %
$ 2223/MT
- Density: 1.06 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 46.0 MPa
- Flexural Strength: 70.0 MPa
$ 1827/MT
- Density: 1.07 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 50.0 MPa
- Elongation at Yield: 45 %
$ 1848/MT
- Density: 1.34 g/cc
- Tensile Strength, Ultimate: 65.0 MPa
- Elongation at Break: 9.0 %
- Flexural Modulus: 3.60 GPa
- Izod Impact, Notched: 1.28 J/cm
$ 1839/MT
- Density: 1.17 g/cc
- Water Absorption: 1.1 %
- Water Absorption at Saturation: 8.0 %
- Linear Mold Shrinkage: 0.011 cm/cm
- Hardness, Rockwell R: 120
$ 1545/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Melt Flow: 6.0 g/10 min
- Tensile Strength, Yield: 54.0 MPa
$ 1693/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 15 - 17 g/10 min
$ 1809/MT
- Density: 1.11 g/cc
- Tensile Strength, Yield: 69.0 MPa
- Elongation at Break: 90 %
- Flexural Strength: 66.0 MPa
- Flexural Modulus: 2.20 GPa
$ 1919/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Moisture Absorption at Equilibrium: 2.8 %
- Water Absorption at Saturation: 9.6 %
- Linear Mold Shrinkage: 0.012 cm/cm
$ 1596/MT
- Density: 1.17 g/cc
- Tensile Strength, Ultimate: 93.0 MPa
- Elongation at Break: 4.0 %
- Flexural Modulus: 4.00 GPa
- Izod Impact, Notched: 1.33 J/cm
- Melting Point: 185 °C
$ 2232/MT
- Density: 1.07 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 40.0 MPa
$ 1569/MT
- Density: 1.11 g/cc
- Oxygen Transmission: 1.50 cc-mm/m²-24hr-atm
- Tensile Strength, Ultimate: 60.0 MPa
- Tensile Strength, Yield: 26.0 MPa
- Elongation at Break: 362 %
$ 1492/MT
- Density: 1.28 g/cc
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 97.0 MPa
- Elongation at Break: 4.0 %
- Flexural Modulus: 5.20 GPa
$ 1464/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Yield: 169 MPa
- Elongation at Break: 3.0 %
- Flexural Modulus: 9.00 GPa
$ 1586/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0070 cm/cm
- High Load Melt Index: 7.8 g/10 min @Load 21.6 kg, Temperature 200 °C
- Hardness, Rockwell R: 116
- Tensile Strength, Ultimate: 55.0 MPa
$ 2070/MT
- Density: 1.34 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 131 MPa
- Elongation at Break: 4.0 %
- Flexural Modulus: 6.20 GPa
$ 1766/MT
- Density: 1.07 g/cc
- Water Absorption: 1.3 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Hardness, Rockwell R: 113
- Tensile Strength, Yield: 51.0 MPa
$ 1532/MT
- Density: 1.13 g/cc
- Water Absorption: 1.8 %
- Elongation at Yield: 100 %
- Izod Impact, Notched: 0.430 J/cm
- Deflection Temperature at 0.46 MPa (66 psi): 177 °C
- Deflection Temperature at 1.8 MPa (264 psi): 74.0 °C
$ 2049/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Melt Flow: 8.0 - 10 g/10 min
- Tensile Strength, Ultimate: 57.0 MPa
$ 1601/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 79.0 MPa
$ 2144/MT
- Density: 1.06 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 65.0 MPa
$ 1650/MT
- Density: 1.24 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 121
- Tensile Strength, Ultimate: 74.0 MPa
$ 1457/MT
- Density: 1.32 g/cc
- Water Absorption: 0.17 %
- Water Absorption at Saturation: 2.0 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 116
$ 1477/MT
- Density: 1.54 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 98.0 MPa
- Elongation at Break: 5.0 %
$ 1694/MT
- Density: 1.05 g/cc
- Tensile Strength, Ultimate: 46.0 MPa
- Elongation at Break: 400 %
- Flexural Modulus: 0.380 GPa
- Izod Impact, Notched: 8.01 J/cm
- Melting Point: 187 °C
$ 1541/MT
- Density: 1.09 g/cc
- Water Absorption: 0.50 %
- Linear Mold Shrinkage: 0.014 cm/cm
- Hardness, Rockwell R: 117
- Tensile Strength, Ultimate: 50.0 MPa
$ 1482/MT
- Density: 1.22 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 6.0 - 8.0 g/10 min
$ 2161/MT
- Density: 1.52 g/cc
- Water Absorption: 0.23 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength, Ultimate: 152 MPa
- Elongation at Break: 4.0 %
$ 1757/MT
- Density: 1.37 g/cc
- Water Absorption: 0.75 %
- Water Absorption at Saturation: 5.4 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Hardness, Rockwell R: 120
$ 2028/MT
- Density: 1.12 g/cc
- Film Elongation at Break, TD: 290 %
- Secant Modulus, TD: 0.650 GPa
- Elmendorf Tear Strength, TD: 2.20 g/micron
- Film Tensile Strength at Break, TD: 60.0 MPa
$ 2052/MT
- Density: 1.52 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Yield: 193 MPa
- Elongation at Break: 3.0 %
- Flexural Modulus: 10.4 GPa
$ 1465/MT
- Density: 1.08 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 110
- Tensile Strength, Ultimate: 48.0 MPa
$ 2375/MT
- Density: 1.07 g/cc
- Water Absorption: 1.3 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Hardness, Rockwell R: 113
- Tensile Strength, Yield: 45.0 MPa
$ 1554/MT
- Density: 1.18 g/cc
- Tensile Strength, Ultimate: 93.0 MPa
- Elongation at Break: 4.0 %
- Flexural Modulus: 4.00 GPa
- Izod Impact, Notched: 1.33 J/cm
- Melting Point: 185 °C
$ 1756/MT
- Density: 1.31 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 119
- Tensile Strength, Yield: 159 MPa
$ 1731/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength, Ultimate: 125 MPa
- Flexural Modulus: 5.30 GPa
- Izod Impact, Notched: 1.66 J/cm
$ 1821/MT
- Density: 1.08 g/cc
- Water Absorption: 1.5 %
- Linear Mold Shrinkage: 0.014 cm/cm
- Tensile Strength, Yield: 41.0 MPa
- Elongation at Break: 85 %
$ 2453/MT
- Density: 1.54 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Hardness, Rockwell R: 90
- Tensile Strength, Yield: 116 MPa
$ 1870/MT
- Density: 1.40 g/cc
- Water Absorption: 0.90 %
- Linear Mold Shrinkage: 0.0025 cm/cm
- Hardness, Rockwell R: 97
- Tensile Strength, Yield: 191 MPa
$ 1477/MT
- Density: 1.25 g/cc
- Water Absorption: 0.30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 124
- Tensile Strength, Ultimate: 64.0 MPa
$ 2432/MT
- Density: 1.29 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Tensile Strength, Yield: 47.0 MPa
- Elongation at Break: 200 %
$ 2234/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 15 - 17 g/10 min
$ 2518/MT
- Density: 1.13 g/cc
- Water Absorption: 1.5 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Rockwell R: 119
- Tensile Strength, Ultimate: 81.0 MPa
$ 1828/MT
- Density: 1.13 g/cc
- Tensile Strength, Ultimate: 83.0 MPa
- Tensile Strength, Yield: 83.0 MPa
- Elongation at Break: 70 %
- Flexural Modulus: 0.100 GPa
$ 2255/MT
- Density: 1.40 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 93.0 MPa
- Elongation at Break: 5.0 %
$ 1887/MT
- Density: 1.25 g/cc
- Water Absorption: 0.30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 59.0 MPa
- Elongation at Break: 11.5 %
$ 1549/MT
- Density: 1.23 g/cc
- Water Absorption: 0.90 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Hardness, Rockwell R: 119
- Tensile Strength, Ultimate: 90.0 MPa
$ 1640/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- High Load Melt Index: 15 - 20 g/10 min @Load 21.6 kg, Temperature 260 °C
- Hardness, Rockwell R: 116
- Tensile Strength, Ultimate: 60.0 MPa
$ 1477/MT
- Density: 1.41 g/cc
- Water Absorption: 0.22 %
- Linear Mold Shrinkage: 0.022 cm/cm
- Melt Flow: 27 g/10 min
- Hardness, Rockwell M: 80
$ 2482/MT
- Density: 1.43 g/cc
- Linear Mold Shrinkage: 0.0045 cm/cm
- Tensile Strength, Ultimate: 88.0 MPa
- Elongation at Break: 4.0 %
- Flexural Modulus: 5.20 GPa
$ 1934/MT
- Density: 1.41 g/cc
- Water Absorption: 0.60 %
- Water Absorption at Saturation: 5.1 %
- Linear Mold Shrinkage: 0.0034 cm/cm
- Hardness, Rockwell R: 120
$ 1480/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 20 - 22 g/10 min
$ 1663/MT
- Density: 1.10 g/cc
- Tensile Strength, Yield: 41.0 MPa
- Elongation at Break: 460 %
- Flexural Modulus: 0.390 GPa
- Izod Impact, Notched: 9.08 J/cm
$ 1599/MT
- Density: 1.07 g/cc
- Water Absorption: 1.3 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Hardness, Rockwell R: 113
- Tensile Strength, Yield: 51.0 MPa
$ 1936/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Melt Flow: 8.0 - 11 g/10 min
- Tensile Strength, Yield: 65.0 MPa
$ 1464/MT
- Density: 1.05 g/cc
- Tensile Strength, Ultimate: 41.0 MPa
- Elongation at Break: 285 %
- Flexural Modulus: 0.380 GPa
- Izod Impact, Notched: 2.67 J/cm
- Melting Point: 186 °C
$ 1467/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 10 - 13 g/10 min
$ 1641/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- High Load Melt Index: 6.5 g/10 min @Load 21.6 kg, Temperature 260 °C
- Hardness, Rockwell R: 113
- Tensile Strength, Ultimate: 54.0 MPa
$ 2262/MT
- Density: 1.14 g/cc
- Water Absorption: 1.2 %
- Water Absorption at Saturation: 8.5 %
- Linear Mold Shrinkage: 0.0125 cm/cm
- Hardness, Rockwell R: 118
$ 1527/MT
- Density: 1.04 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 1.1 %
- Hardness, Rockwell R: 108
- Tensile Strength, Ultimate: 59.0 MPa
$ 1456/MT
- Density: 1.53 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 93.0 MPa
- Elongation at Break: 5.0 %
$ 2350/MT
- Density: 1.41 g/cc
- Water Absorption: 0.22 %
- Linear Mold Shrinkage: 0.022 cm/cm
- Melt Flow: 16 g/10 min
- Hardness, Rockwell M: 80
$ 1638/MT
- Density: 1.04 g/cc
- Water Absorption: 0.30 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 1.6 g/10 min
- Hardness, Rockwell R: 106
$ 2352/MT
- Density: 1.24 g/cc
- Water Absorption: 0.11 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 120 %
$ 1889/MT
- Density: 1.03 g/cc
- Melt Flow: 0.42 g/10 min
- Tensile Strength, Yield: 40.0 MPa
- Izod Impact, Notched: 1.34 J/cm
- Charpy Impact, Notched: 0.950 J/cm² @Thickness 6.00 mm
$ 2228/MT
- Density: 1.07 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 48.0 MPa
$ 1475/MT
- Density: 1.42 g/cc
- Water Absorption: 0.14 %
- Water Absorption at Saturation: 2.0 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 116
$ 1798/MT
- Density: 1.11 g/cc
- Water Absorption: 1.4 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Hardness, Rockwell R: 116
- Tensile Strength, Ultimate: 68.0 MPa
$ 2001/MT
- Density: 1.13 g/cc
- Water Absorption: 1.5 %
- Hardness, Rockwell R: 125
- Tensile Strength, Ultimate: 81.0 MPa
- Elongation at Break: 72 %
$ 2593/MT
- Density: 1.13 g/cc
- Water Absorption: 1.5 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Rockwell M: 85
- Hardness, Rockwell R: 119
$ 1715/MT
- Density: 1.25 g/cc
- Water Absorption: 0.80 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Tensile Strength, Yield: 66.0 MPa
- Elongation at Break: 9.0 %
$ 1923/MT
- Density: 1.14 g/cc
- Water Absorption: 0.12 %
- Linear Mold Shrinkage: 0.017 cm/cm
- Tensile Strength, Ultimate: 41.0 MPa
- Elongation at Break: 20 %
$ 1670/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Tensile Strength, Ultimate: 55.0 MPa
- Elongation at Break: 315 %
- Izod Impact, Notched: 5.34 J/cm
$ 2031/MT
- Density: 1.34 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Tensile Strength, Yield: 44.0 MPa
- Elongation at Break: 60 %
$ 1634/MT
- Density: 1.09 g/cc
- Water Absorption: 1.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Water Absorption at Saturation: 8.5 %
- Linear Mold Shrinkage: 0.014 cm/cm
$ 1684/MT
- Density: 1.17 g/cc
- Water Absorption: 1.0 %
- Water Absorption at Saturation: 8.0 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Hardness, Rockwell R: 119
$ 1833/MT
- Density: 1.17 g/cc
- Water Absorption: 1.0 %
- Water Absorption at Saturation: 8.0 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Hardness, Rockwell R: 119
$ 1866/MT
- Density: 1.17 g/cc
- Water Absorption: 1.0 %
- Water Absorption at Saturation: 8.0 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Hardness, Rockwell R: 119
$ 2272/MT
- Density: 1.17 g/cc
- Water Absorption: 1.0 %
- Water Absorption at Saturation: 8.0 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Hardness, Rockwell R: 119
$ 1576/MT
- Density: 1.17 g/cc
- Water Absorption: 1.0 %
- Water Absorption at Saturation: 8.0 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Hardness, Rockwell R: 119
$ 1470/MT
- Density: 1.30 g/cc
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 110 MPa
- Elongation at Break: 7.0 %
- Flexural Modulus: 6.10 GPa
$ 1552/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 20 - 22 g/10 min
$ 2509/MT
- Density: 1.03 g/cc
- Water Absorption: 0.20 %
- Water Absorption at Saturation: 1.1 %
- Hardness, Rockwell R: 68
- Tensile Strength, Yield: 48.0 MPa
$ 1737/MT
- Density: 1.39 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.28 %
- Melt Flow: 1.0 g/10 min
- Hardness, Rockwell R: 117
$ 2482/MT
- Density: 1.37 g/cc
- Water Absorption: 1.1 %
- Hardness, Rockwell R: 119
- Tensile Strength, Ultimate: 131 MPa
- Elongation at Break: 3.0 %
$ 1585/MT
- Density: 1.37 g/cc
- Water Absorption: 0.80 %
- Water Absorption at Saturation: 5.4 %
- Hardness, Rockwell R: 120
- Tensile Strength, Ultimate: 159 MPa
$ 1475/MT
- Density: 1.17 g/cc
- Water Absorption: 1.0 %
- Water Absorption at Saturation: 8.0 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Hardness, Rockwell R: 119
$ 1597/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Rockwell R: 116
- Tensile Strength, Yield: 55.0 MPa
- Elongation at Break: 65 %
$ 1564/MT
- Density: 1.17 g/cc
- Tensile Strength, Yield: 93.0 MPa
- Elongation at Break: 5.2 %
- Flexural Modulus: 3.80 GPa
- Izod Impact, Notched: 1.33 J/cm
$ 1626/MT
- Density: 1.52 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength, Ultimate: 100 MPa
- Elongation at Break: 3.0 %
$ 1555/MT
- Density: 1.80 g/cc
- Water Absorption: 0.075 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength, Yield: 76.0 MPa
- Elongation at Break: 3.0 %
$ 1860/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- High Load Melt Index: 6.0 g/10 min @Load 21.6 kg, Temperature 260 °C
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 56.0 MPa
$ 2334/MT
- Density: 1.31 g/cc
- Water Absorption: 1.1 %
- Tensile Strength, Ultimate: 166 MPa
- Elongation at Break: 3.0 %
- Flexural Modulus: 7.60 GPa
$ 1529/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Moisture Absorption at Equilibrium: 2.8 %
- Water Absorption at Saturation: 9.6 %
- Linear Mold Shrinkage: 0.013 cm/cm
$ 1635/MT
- Density: 1.24 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 120
- Tensile Strength, Ultimate: 68.0 MPa
$ 1717/MT
- Density: 1.03 g/cc
- Water Absorption: 0.20 %
- Water Absorption at Saturation: 1.4 %
- Tensile Strength, Yield: 49.0 MPa
- Elongation at Break: 325 %
$ 1894/MT
- Density: 1.20 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 95.0 MPa
- Flexural Modulus: 4.90 GPa
$ 1545/MT
- Density: 1.36 g/cc
- Water Absorption: 0.75 %
- Water Absorption at Saturation: 5.4 %
- Hardness, Rockwell R: 120
- Tensile Strength, Ultimate: 176 MPa
$ 1573/MT
- Density: 1.30 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Hardness, Rockwell R: 119
- Tensile Strength, Ultimate: 145 MPa
$ 2471/MT
- Density: 1.14 g/cc
- Water Absorption: 1.8 %
- Moisture Absorption at Equilibrium: 2.8 %
- Water Absorption at Saturation: 9.6 %
- Linear Mold Shrinkage: 0.012 cm/cm
$ 1497/MT
- Density: 1.36 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 119
- Tensile Strength, Ultimate: 159 MPa
$ 1772/MT
- Density: 1.28 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.31 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 15 - 17 g/10 min
$ 1594/MT
- Density: 1.55 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength, Yield: 135 MPa
- Elongation at Break: 2.2 %
$ 1554/MT
- Density: 1.42 g/cc
- Water Absorption: 0.14 %
- Water Absorption at Saturation: 2.0 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 116
$ 1537/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Melt Flow: 2.5 - 3.0 g/10 min
- Tensile Strength, Yield: 63.0 MPa
$ 1519/MT
- Density: 1.04 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength, Ultimate: 50.0 MPa
- Elongation at Break: 30 %
$ 1760/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Moisture Absorption at Equilibrium: 2.7 %
- Water Absorption at Saturation: 9.5 %
- Tensile Strength, Ultimate: 60.0 MPa
$ 1916/MT
- Density: 1.42 g/cc
- Water Absorption: 0.19 %
- Moisture Absorption at Equilibrium: 0.20 %
- Melt Flow: 6.0 g/10 min
- Hardness, Rockwell R: 122
$ 2137/MT
- Density: 1.47 g/cc
- Water Absorption: 0.70 %
- Moisture Absorption at Equilibrium: 1.5 %
- Water Absorption at Saturation: 4.7 %
- Linear Mold Shrinkage: 0.0030 cm/cm
$ 1804/MT
- Density: 1.35 g/cc
- Water Absorption: 1.1 %
- Hardness, Rockwell R: 119
- Tensile Strength, Ultimate: 131 MPa
- Elongation at Break: 3.0 %
$ 1669/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Hardness, Rockwell R: 114
- Tensile Strength, Ultimate: 57.0 MPa
- Elongation at Break: 75 %
$ 2212/MT
- Density: 1.05 g/cc
- Melt Flow: 3.2 g/10 min
- Hardness, Rockwell R: 104
- Tensile Strength, Ultimate: 45.0 MPa
- Flexural Strength: 70.0 MPa
$ 2507/MT
- Density: 1.05 g/cc
- Melt Flow: 0.70 g/10 min
- Hardness, Rockwell R: 105
- Tensile Strength, Ultimate: 44.0 MPa
- Flexural Strength: 60.0 MPa
$ 1781/MT
- Density: 1.46 g/cc
- Linear Mold Shrinkage: 0.0015 cm/cm
- Hardness, Rockwell R: 120
- Tensile Strength, Yield: 193 MPa
- Elongation at Break: 2.5 %
$ 1562/MT
- Density: 1.41 g/cc
- Water Absorption: 0.22 %
- Linear Mold Shrinkage: 0.020 cm/cm
- Melt Flow: 2.5 g/10 min
- Hardness, Rockwell M: 78
$ 1809/MT
- Density: 1.06 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 64.0 MPa
$ 1516/MT
- Density: 1.40 g/cc
- Tensile Strength, Ultimate: 62.0 MPa
- Elongation at Break: 5.0 %
- Flexural Modulus: 4.10 GPa
- Izod Impact, Notched: 1.17 J/cm
$ 1454/MT
- Density: 1.12 g/cc
- Water Absorption: 1.9 %
- Water Absorption at Saturation: 9.6 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Hardness, Rockwell R: 100
$ 1633/MT
- Density: 1.04 g/cc
- Water Absorption: 0.30 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 14 g/10 min
- Hardness, Rockwell R: 104
$ 1977/MT
- Density: 1.50 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Hardness, Rockwell R: 121
- Tensile Strength, Ultimate: 83.0 MPa
$ 1564/MT
- Density: 1.15 g/cc
- Water Absorption: 1.5 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Rockwell R: 117
- Tensile Strength, Ultimate: 61.0 MPa
$ 2122/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 10 - 13 g/10 min
$ 1726/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Moisture Absorption at Equilibrium: 2.8 %
- Water Absorption at Saturation: 9.6 %
- Linear Mold Shrinkage: 0.012 cm/cm
$ 1680/MT
- Density: 1.70 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength, Yield: 162 MPa
- Elongation at Break: 1.6 %
$ 1488/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Hardness, Rockwell R: 112
- Tensile Strength, Ultimate: 173 MPa
- Elongation at Yield: 2.0 %
$ 1521/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 12 g/10 min
$ 2060/MT
- Density: 1.02 g/cc
- Water Absorption: 0.20 %
- Water Absorption at Saturation: 1.4 %
- Tensile Strength, Yield: 51.0 MPa
- Elongation at Break: 325 %
$ 1741/MT
- Density: 1.35 g/cc
- Tensile Strength, Yield: 141 MPa
- Elongation at Break: 3.0 %
- Flexural Modulus: 6.60 GPa
- Izod Impact, Notched: 1.12 J/cm
$ 2032/MT
- Density: 1.15 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength, Ultimate: 69.0 MPa
- Elongation at Break: 5.1 %
$ 2485/MT
- Density: 1.13 g/cc
- Water Absorption: 1.5 %
- Hardness, Rockwell R: 125
- Tensile Strength, Ultimate: 81.0 MPa
- Elongation at Break: 72 %
$ 2515/MT
- Density: 1.31 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 120
- Tensile Strength, Ultimate: 124 MPa
$ 1720/MT
- Density: 1.39 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 0.28 %
- Melt Flow: 6.0 g/10 min
- Hardness, Rockwell R: 117
$ 1594/MT
- Density: 1.10 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Hardness, Rockwell R: 115
- Tensile Strength, Ultimate: 51.0 MPa
$ 1925/MT
- Density: 1.19 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Flow: 16 - 18 g/10 min
$ 1576/MT
- Density: 1.54 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Hardness, Rockwell R: 90
- Tensile Strength, Ultimate: 98.0 MPa
$ 2080/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 225 %
$ 1508/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 10 g/10 min
$ 1723/MT
- Density: 1.36 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Hardness, Rockwell R: 119
- Tensile Strength, Ultimate: 159 MPa
$ 1751/MT
- Density: 1.37 g/cc
- Water Absorption: 0.80 %
- Moisture Absorption at Equilibrium: 1.7 %
- Water Absorption at Saturation: 5.4 %
- Linear Mold Shrinkage: 0.0020 cm/cm
$ 2389/MT
- Density: 1.56 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Tensile Strength, Ultimate: 221 MPa
- Elongation at Break: 1.0 %
$ 1787/MT
- Density: 1.06 g/cc
- Water Absorption: 0.37 %
- Water Absorption at Saturation: 3.0 %
- Linear Mold Shrinkage: 0.011 cm/cm
- Hardness, Rockwell R: 115
$ 1871/MT
- Density: 1.06 g/cc
- Water Absorption: 0.37 %
- Water Absorption at Saturation: 3.0 %
- Linear Mold Shrinkage: 0.011 cm/cm
- Hardness, Rockwell R: 115
$ 1524/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- High Load Melt Index: 7.0 g/10 min @Load 21.6 kg, Temperature 260 °C
- Hardness, Rockwell R: 116
- Tensile Strength, Ultimate: 60.0 MPa
$ 1860/MT
- Density: 1.49 g/cc
- Water Absorption: 1.1 %
- Moisture Absorption at Equilibrium: 1.7 %
- Hardness, Rockwell R: 121
- Tensile Strength, Yield: 83.0 MPa
$ 1795/MT
- Density: 1.45 g/cc
- Tensile Strength, Ultimate: 78.0 MPa
- Elongation at Break: 3.0 %
- Flexural Modulus: 4.80 GPa
- Izod Impact, Notched: 1.07 J/cm
$ 1868/MT
- Density: 1.37 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Hardness, Rockwell R: 120
- Tensile Strength, Ultimate: 179 MPa
$ 1777/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Melt Flow: 8.0 g/10 min
- Tensile Strength, Yield: 63.0 MPa
$ 2298/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Melt Flow: 8.0 - 10 g/10 min
- Tensile Strength, Ultimate: 50.0 MPa
$ 1751/MT
- Density: 1.02 g/cc
- Water Absorption: 0.20 %
- Water Absorption at Saturation: 1.4 %
- Hardness, Rockwell R: 100
- Tensile Strength, Yield: 57.0 MPa
$ 1640/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- High Load Melt Index: 7.0 g/10 min @Load 21.6 kg, Temperature 260 °C
- Hardness, Rockwell R: 116
- Tensile Strength, Ultimate: 60.0 MPa
$ 1676/MT
- Density: 1.04 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 1.1 %
- Hardness, Rockwell R: 105
- Tensile Strength, Ultimate: 62.0 MPa
$ 1724/MT
- Density: 1.43 g/cc
- Water Absorption: 0.26 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength, Ultimate: 124 MPa
- Elongation at Break: 4.0 %
$ 1557/MT
- Density: 1.10 g/cc
- Water Absorption: 1.2 %
- Moisture Absorption at Equilibrium: 2.2 %
- Water Absorption at Saturation: 7.7 %
- Linear Mold Shrinkage: 0.015 cm/cm
$ 2170/MT
- Density: 1.17 g/cc
- Water Absorption: 0.18 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Hardness, Rockwell R: 107
- Tensile Strength, Ultimate: 79.0 MPa
$ 1509/MT
- Density: 1.37 g/cc
- Water Absorption: 0.80 %
- Water Absorption at Saturation: 5.4 %
- Hardness, Rockwell R: 118
- Tensile Strength, Ultimate: 131 MPa
$ 1878/MT
- Density: 1.53 g/cc
- Water Absorption: 0.070 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength, Ultimate: 90.0 MPa
- Elongation at Break: 5.0 %
$ 1543/MT
- Density: 1.20 g/cc
- Water Absorption: 0.20 %
- Moisture Absorption at Equilibrium: 0.35 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 3.0 - 4.0 g/10 min
$ 1605/MT
- Density: 1.03 g/cc
- Melt Flow: 1.4 g/10 min
- Tensile Strength, Yield: 40.0 MPa
- Izod Impact, Notched: 1.10 J/cm
- Charpy Impact, Notched: 0.950 J/cm² @Thickness 6.00 mm
$ 2035/MT
- Density: 1.34 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Tensile Strength, Yield: 47.0 MPa
- Elongation at Break: 100 %
$ 1526/MT
- Density: 1.54 g/cc
- Linear Mold Shrinkage: 0.0015 cm/cm
- Hardness, Rockwell R: 98
- Tensile Strength, Ultimate: 255 MPa
- Elongation at Yield: 2.0 %
$ 1832/MT
- Density: 1.14 g/cc
- Water Absorption: 1.2 %
- Water Absorption at Saturation: 8.5 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Rockwell R: 118
$ 2533/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage, Flow: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.018 cm/cm
- Melt Flow: 8.0 - 10 g/10 min
- Tensile Strength, Ultimate: 58.0 MPa
$ 1486/MT
- Density: 1.09 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Tensile Strength, Ultimate: 48.0 MPa
- Elongation at Break: 40 %
- Flexural Modulus: 0.970 GPa
$ 1677/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.0080 cm/cm
- Tensile Strength, Yield: 100 MPa
- Elongation at Break: 7.5 %
- Flexural Modulus: 3.60 GPa
$ 1468/MT
- Density: 1.41 g/cc
- Water Absorption: 0.22 %
- Linear Mold Shrinkage: 0.022 cm/cm
- Melt Flow: 27 g/10 min
- Hardness, Rockwell M: 80
$ 1710/MT
- Density: 1.08 g/cc
- Water Absorption: 0.40 %
- Hardness, Rockwell R: 112
- Tensile Strength, Ultimate: 66.0 MPa
- Elongation at Break: 70 %
$ 1450/MT
- Density: 1.14 g/cc
- Water Absorption: 1.5 %
- Water Absorption at Saturation: 9.0 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Rockwell R: 119
$ 1644/MT
- Density: 1.36 g/cc
- Water Absorption: 1.8 %
- Water Absorption at Saturation: 6.5 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength, Yield: 162 MPa
$ 1591/MT
- Density: 1.11 g/cc
- Water Absorption: 1.5 %
- Moisture Absorption at Equilibrium: 2.5 %
- Water Absorption at Saturation: 8.5 %
- Linear Mold Shrinkage: 0.014 cm/cm
$ 1548/MT
- Density: 1.20 g/cc
- Tensile Strength, Ultimate: 94.0 MPa
- Elongation at Break: 5.7 %
- Flexural Modulus: 3.50 GPa
- Izod Impact, Notched: 1.55 J/cm
- Melting Point: 252 °C
$ 1451/MT
- Density: 1.05 g/cc
- Melt Flow: 3.5 g/10 min
- Hardness, Rockwell R: 115
- Tensile Strength, Yield: 53.0 MPa
- Flexural Strength: 69.0 MPa
$ 1622/MT
- Density: 1.04 g/cc
- Water Absorption: 0.30 %
- Moisture Absorption at Equilibrium: 1.1 %
- Hardness, Rockwell R: 105
- Tensile Strength, Ultimate: 66.0 MPa
$ 1517/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 12 g/10 min
$ 1460/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- High Load Melt Index: 6.5 g/10 min @Load 21.6 kg, Temperature 260 °C
- Hardness, Rockwell R: 113
- Tensile Strength, Ultimate: 54.0 MPa
$ 1483/MT
- Density: 1.41 g/cc
- Water Absorption: 0.22 %
- Linear Mold Shrinkage: 0.020 cm/cm
- Melt Flow: 9.0 g/10 min
- Hardness, Rockwell M: 80
$ 1484/MT
- Density: 1.20 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 95.0 MPa
- Flexural Modulus: 4.90 GPa
$ 1914/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Tensile Strength, Ultimate: 66.0 MPa
- Elongation at Break: 20 %
- Flexural Modulus: 2.20 GPa
$ 1715/MT
- Density: 1.43 g/cc
- Water Absorption: 0.26 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength, Ultimate: 117 MPa
- Elongation at Break: 3.0 %
$ 1550/MT
- Density: 1.24 g/cc
- Water Absorption: 0.15 %
- Water Absorption at Saturation: 1.0 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 107 MPa
$ 1938/MT
- Density: 1.31 g/cc
- Water Absorption: 0.080 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 200 %
$ 1960/MT
- Density: 1.54 g/cc
- Water Absorption: 0.18 %
- Melt Flow: 6.0 g/10 min
- Hardness, Rockwell R: 118
- Tensile Strength, Yield: 48.0 MPa
$ 1583/MT
- Density: 1.15 g/cc
- Water Absorption: 1.5 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Rockwell R: 117
- Tensile Strength, Ultimate: 65.5 MPa
$ 1824/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 15 - 17 g/10 min @Load 1.20 kg, Temperature 300 °C
$ 1717/MT
- Density: 1.03 g/cc
- Water Absorption: 0.20 %
- Water Absorption at Saturation: 1.1 %
- Tensile Strength, Yield: 46.0 MPa
- Elongation at Break: 260 %
$ 1866/MT
- Density: 1.19 g/cc
- Water Absorption: 0.90 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Hardness, Rockwell R: 106
- Tensile Strength, Ultimate: 94.0 MPa
$ 2058/MT
- Density: 1.12 g/cc
- Apparent Bulk Density: 0.650 g/cc
- Tensile Strength, Ultimate: 82.8 MPa
- Tensile Strength, Yield: 82.8 MPa
- Elongation at Break: 70 %
$ 1719/MT
- Density: 1.21 g/cc
- Water Absorption: 1.1 %
- Water Absorption at Saturation: 7.1 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Hardness, Rockwell R: 120
$ 1830/MT
- Density: 1.19 g/cc
- Water Absorption: 0.90 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Hardness, Rockwell R: 106
- Tensile Strength, Ultimate: 88.0 MPa
$ 1987/MT
- Density: 1.20 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 8.0 g/10 min
$ 1779/MT
- Density: 1.08 g/cc
- Water Absorption: 1.1 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Hardness, Rockwell R: 113
- Tensile Strength, Ultimate: 41.0 MPa
$ 1850/MT
- Density: 1.25 g/cc
- Water Absorption: 0.30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 59.0 MPa
- Elongation at Break: 11.5 %
$ 2412/MT
- Density: 1.30 g/cc
- Water Absorption: 0.20 %
- Linear Mold Shrinkage: 0.0035 cm/cm
- Tensile Strength, Ultimate: 131 MPa
- Elongation at Break: 4.0 %
$ 1655/MT
- Density: 1.48 g/cc
- Water Absorption: 0.090 %
- Moisture Absorption at Equilibrium: 1.5 %
- Water Absorption at Saturation: 4.0 %
- Linear Mold Shrinkage: 0.0040 cm/cm
$ 1795/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Moisture Absorption at Equilibrium: 2.8 %
- Water Absorption at Saturation: 9.6 %
- Linear Mold Shrinkage: 0.012 cm/cm
$ 1547/MT
- Density: 1.14 g/cc
- Water Absorption: 1.35 %
- Moisture Absorption at Equilibrium: 2.2 %
- Water Absorption at Saturation: 8.6 %
- Hardness, Rockwell R: 104
$ 1673/MT
- Density: 1.13 g/cc
- Water Absorption: 1.6 %
- Moisture Absorption at Equilibrium: 2.8 %
- Water Absorption at Saturation: 9.6 %
- Linear Mold Shrinkage: 0.012 cm/cm
$ 1493/MT
- Density: 1.71 g/cc
- Water Absorption: 0.30 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength, Ultimate: 152 MPa
- Elongation at Break: 2.0 %
$ 1535/MT
- Density: 1.34 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 135 MPa
- Elongation at Break: 4.0 %
- Flexural Modulus: 6.40 GPa
$ 1501/MT
- Density: 1.68 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Yield: 131 MPa
- Elongation at Break: 3.0 %
- Flexural Modulus: 9.00 GPa
$ 1852/MT
- Density: 1.28 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Tensile Strength, Ultimate: 107 MPa
- Elongation at Break: 4.0 %
- Flexural Modulus: 5.20 GPa
$ 1572/MT
- Density: 1.22 g/cc
- Water Absorption: 0.15 %
- Moisture Absorption at Equilibrium: 0.34 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 15 - 17 g/10 min
$ 1649/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 2.0 g/10 min
- Hardness, Rockwell R: 112
- Tensile Strength, Ultimate: 40.0 MPa
$ 1542/MT
- Density: 1.28 g/cc
- Water Absorption: 0.10 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 97.0 MPa
- Elongation at Break: 6.0 %
$ 1451/MT
- Density: 1.07 g/cc
- Water Absorption: 1.3 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Hardness, Rockwell R: 113
- Tensile Strength, Yield: 51.0 MPa
$ 1823/MT
- Density: 1.70 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Hardness, Rockwell R: 118
- Tensile Strength, Yield: 179 MPa
- Elongation at Break: 1.6 %
$ 2252/MT
- Density: 1.38 g/cc
- Water Absorption: 0.12 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Tensile Strength, Ultimate: 83.0 MPa
- Elongation at Break: 5.0 %
$ 2260/MT
- Density: 1.14 g/cc
- Water Absorption: 1.9 %
- Hardness, Rockwell R: 117
- Tensile Strength, Ultimate: 100 MPa
- Elongation at Yield: 70 %
$ 1700/MT
- Density: 1.57 g/cc
- Water Absorption: 0.50 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Hardness, Rockwell R: 120
- Tensile Strength, Ultimate: 205 MPa
$ 1907/MT
- Density: 1.13 g/cc
- Water Absorption: 1.5 %
- Water Absorption at Saturation: 9.0 %
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Rockwell R: 119
$ 1583/MT
- Density: 1.11 g/cc
- Oxygen Transmission: 1.50 cc-mm/m²-24hr-atm
- Tensile Strength, Ultimate: 60.0 MPa
- Tensile Strength, Yield: 26.0 MPa
- Elongation at Break: 362 %
$ 2286/MT
- Density: 1.03 g/cc
- Water Absorption: 0.20 %
- Water Absorption at Saturation: 1.4 %
- Tensile Strength, Yield: 49.0 MPa
- Elongation at Break: 325 %
$ 2262/MT
- Density: 1.27 g/cc
- Water Absorption: 0.060 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Tensile Strength, Ultimate: 101 MPa
- Elongation at Break: 4.1 %
$ 1516/MT
- Density: 1.14 g/cc
- Water Absorption: 1.8 %
- Moisture Absorption at Equilibrium: 2.8 %
- Water Absorption at Saturation: 9.6 %
- Linear Mold Shrinkage: 0.012 cm/cm
$ 1732/MT
- Density: 1.05 g/cc
- Water Absorption: 0.30 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 1.7 g/10 min
- Hardness, Rockwell R: 110
$ 2318/MT
- Density: 1.57 g/cc
- Water Absorption: 0.50 %
- Linear Mold Shrinkage: 0.0035 cm/cm
- Hardness, Rockwell R: 121
- Tensile Strength, Yield: 221 MPa
$ 1482/MT
- Density: 1.37 g/cc
- Water Absorption: 0.75 %
- Water Absorption at Saturation: 5.4 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Hardness, Rockwell R: 120
$ 2577/MT
- Density: 1.21 g/cc
- Water Absorption: 1.4 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Hardness, Rockwell R: 119
- Tensile Strength, Ultimate: 117 MPa
Delivery Polymer Ashley Polymers
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, seychelle yacht for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
