$ 1614/MT
- Specific Gravity: 1.16 g/cc
- Melt Flow: 28 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength, Yield: 55.1 MPa
- Elongation at Yield: 4.7 %
- Flexural Strength: 86.8 MPa
$ 1613/MT
- Specific Gravity: 1.34 g/cc
- Viscosity Measurement: 0.800
- Tensile Strength, Yield: 71.7 MPa
- Elongation at Break: 3.9 %
- Elongation at Yield: 2.9 %
$ 1476/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.3 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 8.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 1518/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 8.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 31.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 120
$ 1722/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 7.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
$ 1509/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 102
$ 1772/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 102
$ 2521/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 9.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 112
$ 2384/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 0.50 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 2058/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.70 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 108
$ 1679/MT
- Specific Gravity: 1.24 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 5.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 98
$ 2403/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 6.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 20 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1812/MT
- Specific Gravity: 1.24 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 5.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 14.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 98
$ 1726/MT
- Specific Gravity: 1.24 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Melt Flow: 0.10 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 78.26 MPa
$ 1521/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 0.30 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 101
$ 1668/MT
- Specific Gravity: 1.52 g/cc
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength, Yield: 114 MPa
- Flexural Modulus: 7.59 GPa
$ 1751/MT
- Specific Gravity: 1.06 g/cc
- Melt Flow: 0.10 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 23.6 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 33.9 MPa
- Elongation at Break: 8.7 %
$ 1915/MT
- Density: 0.890 g/cc
- Melt Flow: 6.9 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 17.9 MPa
- Elongation at Yield: 6.5 %
- Flexural Modulus: 0.8475 GPa
$ 1887/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Hardness, Rockwell R: 103
- Tensile Strength at Break: 51.0 MPa
- Tensile Strength, Yield: 47.0 MPa
$ 1774/MT
- Specific Gravity: 1.37 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm @Thickness 3.17 mm
- Tensile Strength at Break: 157 MPa
- Elongation at Break: 3.4 %
- Flexural Modulus: 7.50 GPa
$ 2410/MT
- Specific Gravity: 1.19 g/cc
- Water Absorption: 0.14 %
- Linear Mold Shrinkage: 0.0010 - 0.0020 cm/cm
- Tensile Strength, Yield: 131 MPa
- Elongation at Yield: 1.5 %
$ 1990/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage: 0.0070 - 0.0090 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength, Yield: 52.0 MPa
- Flexural Modulus: 1.932 GPa
- Izod Impact, Notched: 6.94 J/cm @Thickness 3.17 mm, Temperature 23.0 °C
$ 1577/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.50 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1706/MT
- Specific Gravity: 1.20 g/cc
- Melt Flow: 12 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 59.1 MPa
- Flexural Strength: 82.4 MPa
- Flexural Modulus: 2.246 GPa
$ 1966/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.40 - 1.2 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 100
- Tensile Strength, Yield: 35.1 MPa
$ 1889/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 42.64 MPa
$ 1640/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 7.5 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 38.0 MPa
- Tensile Strength, Yield: 56.0 MPa
$ 1770/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 7.5 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 38.0 MPa
- Tensile Strength, Yield: 56.0 MPa
$ 1841/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 30 g/10 min @Load 5.00 kg, Temperature 260 °C
- Hardness, Rockwell R: 116
- Tensile Strength, Yield: 61.0 MPa
$ 2211/MT
- Specific Gravity: 1.24 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 10.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 50.1 MPa
- Elongation at Yield: 4.1 %
$ 1597/MT
- Density: 1.06 g/cc
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Ash: 20 - 24 %
- Tensile Strength, Yield: 23.0 MPa
- Elongation at Yield: 6.3 %
$ 2277/MT
- Specific Gravity: 1.09 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 0.30 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1584/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 108
- Tensile Strength, Yield: 44.8 MPa
$ 1660/MT
- Specific Gravity: 1.08 g/cc
- Water Absorption: 1.2 % @Time 86400 sec
- Linear Mold Shrinkage: 0.016 cm/cm @Thickness 3.17 mm
- Tensile Strength, Yield: 48.0 MPa
- Elongation at Break: 20 %
$ 1639/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 100
$ 1737/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0090 cm/cm
- Melt Flow: 0.90 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 10.1 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 96
$ 1742/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.010 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 13 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 98
$ 2011/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage: 0.0070 - 0.0090 cm/cm
- Melt Flow: 6.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength, Yield: 54.0 MPa
$ 1497/MT
- Specific Gravity: 1.20 g/cc
- Water Absorption: 0.25 % @Temperature 23.0 °C, Time 86400 sec
- Melt Flow: 16 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 123
- Tensile Strength, Yield: 62.0 MPa
$ 1706/MT
- Specific Gravity: 1.11 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Flow: 1.1 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 113
$ 2028/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 11 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 1546/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 15 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 102
- Tensile Strength, Yield: 44.8 MPa
$ 1463/MT
- Specific Gravity: 1.12 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.5 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 5.2 g/10 min @Load 5.00 kg, Temperature 265 °C
- Hardness, Rockwell R: 115
$ 1622/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 118
- Tensile Strength at Break: 69.0 MPa
$ 1833/MT
- Specific Gravity: 1.21 g/cc
- Water Absorption: 0.35 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1481/MT
- Density: 1.14 g/cc
- Filler Content: 28 - 32 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 52.0 MPa
$ 1468/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 4.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 14.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 122
$ 2397/MT
- Specific Gravity: 1.05 g/cc
- Melt Flow: 3.7 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 85
- Tensile Strength at Break: 23.4 MPa
- Tensile Strength, Yield: 38.6 MPa
$ 1621/MT
- Specific Gravity: 1.13 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 0.50 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 105
$ 1525/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 1.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 95
$ 1554/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 13.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 115
$ 2528/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 9.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 98
$ 1488/MT
- Density: 0.900 g/cc
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Rockwell R: 80
- Tensile Strength, Yield: 28.6 MPa
- Elongation at Yield: 11 %
$ 1493/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 0.30 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 2.9 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1570/MT
- Density: 1.11 g/cc
- Melt Flow: 14.4 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 61.0 MPa
- Elongation at Yield: 9.4 %
- Flexural Strength: 94.0 MPa
$ 1759/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 7.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 93
- Tensile Strength, Yield: 40.0 MPa
$ 1460/MT
- Specific Gravity: 1.10 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 4.4 g/10 min @Load 5.00 kg, Temperature 200 °C
- Tensile Strength, Yield: 52.90 MPa
- Flexural Strength: 80.0 MPa
$ 1563/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 35 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength, Yield: 48.7 MPa
- Flexural Modulus: 2.019 GPa
$ 1475/MT
- Density: 0.910 g/cc
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Rockwell R: 113
- Tensile Strength, Yield: 40.7 MPa
- Flexural Modulus: 1.93 GPa
- Izod Impact, Notched: 0.182 J/cm
$ 2233/MT
- Specific Gravity: 1.12 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 0.35 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 93
$ 1489/MT
- Specific Gravity: 1.04 g/cc
- Melt Flow: 1.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 43.0 MPa
- Elongation at Yield: 5.0 %
- Tensile Modulus: 0.778 GPa
$ 1759/MT
- Specific Gravity: 1.50 g/cc
- Viscosity: 1.20e+6 cP @Load 5.00 kg, Temperature 250 °C
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength, Yield: 103.5 MPa
- Flexural Modulus: 6.486 GPa
$ 2188/MT
- Specific Gravity: 1.39 g/cc
- Viscosity Measurement: 0.740
- Melt Flow: 120 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 59.2 MPa
- Elongation at Break: 41 %
$ 1558/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.9 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 8.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 108
$ 1787/MT
- Specific Gravity: 1.08 g/cc
- Melt Flow: 4.7 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 15.8 MPa
- Tensile Strength, Yield: 26.2 MPa
- Flexural Strength: 45.5 MPa
$ 1476/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 10.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 120
$ 1592/MT
- Specific Gravity: 1.15 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0080 cm/cm
- Melt Flow: 1.3 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 112
- Tensile Strength, Yield: 58.6 MPa
$ 1476/MT
- Specific Gravity: 1.12 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.010 cm/cm
- Melt Flow: 1.3 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 98
$ 1909/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 9.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 112
$ 2048/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 110
- Tensile Strength, Yield: 62.1 MPa
$ 1572/MT
- Density: 0.900 g/cc
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 26.0 MPa
- Elongation at Yield: 9.0 %
- Flexural Modulus: 0.965 GPa
$ 1664/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 30.3 MPa
- Flexural Modulus: 3.312 GPa
$ 1830/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.70 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 2.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 52.1 MPa
$ 1510/MT
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.35 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 1.8 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1992/MT
- Density: 1.13 g/cc
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 49.0 MPa
- Elongation at Yield: 3.0 %
- Flexural Strength: 72.0 MPa
$ 2479/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 108
- Tensile Strength, Yield: 44.8 MPa
$ 1519/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.50 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 112
$ 1724/MT
- Density: 0.918 g/cc
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 15.2 MPa
- Tensile Strength at Break: 17.2 MPa
- Elongation at Break: 300 %
$ 1883/MT
- Specific Gravity: 1.10 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 0.20 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2047/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 0.30 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 88
$ 1486/MT
- Density: 1.13 g/cc
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Flexural Modulus: 4.483 GPa
- Izod Impact, Notched: 0.972 J/cm @Thickness 3.17 mm
- Glass Content (%): 30
$ 2302/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0070 - 0.0090 cm/cm
- Melt Flow: 6.2 g/10 min @Load 3.80 kg, Temperature 300 °C
- Melt Flow: 26.2 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 51.7 MPa
$ 1560/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1991/MT
- Specific Gravity: 1.08 g/cc
- Water Absorption: 1.2 % @Time 86400 sec
- Linear Mold Shrinkage: 0.016 cm/cm @Thickness 3.17 mm
- Hardness, Rockwell R: 119
- Tensile Strength, Yield: 50.0 MPa
$ 2498/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 7.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 117
$ 2066/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.3 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 4.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
$ 2187/MT
- Specific Gravity: 1.30 g/cc
- Linear Mold Shrinkage: 0.0070 - 0.0090 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 265 °C
- Ash: 10 %
- Tensile Strength, Yield: 62.0 MPa
$ 1829/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 1.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 4.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 102
$ 2456/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength, Yield: 52.0 MPa
- Flexural Modulus: 2.036 GPa
- Izod Impact, Notched: 5.40 J/cm @Thickness 3.17 mm
$ 1497/MT
- Specific Gravity: 1.21 g/cc
- Water Absorption: 0.35 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1546/MT
- Specific Gravity: 1.03 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Shore D: 71
- Tensile Strength, Yield: 37.2 MPa
$ 2185/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.7 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 6.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 101
$ 1685/MT
- Specific Gravity: 1.01 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Melt Flow: 9.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Tensile Strength, Yield: 27.6 MPa
- Flexural Strength: 37.2 MPa
$ 2203/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.3 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 4.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
$ 2329/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 0.90 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 88
$ 1856/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.70 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
$ 1506/MT
- Specific Gravity: 1.12 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0080 cm/cm
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 112
$ 2078/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.5 - 6.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 9.0 - 13 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
$ 1596/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm @Thickness 3.17 mm
- Tensile Strength, Yield: 60.0 MPa
- Elongation at Break: 50 %
- Flexural Modulus: 1.795 GPa
$ 2505/MT
- Specific Gravity: 1.24 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 0.70 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 103
$ 1706/MT
- Density: 0.904 g/cc
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Rockwell R: 99
- Tensile Strength, Yield: 34.5 MPa
- Elongation at Yield: 12 %
$ 1510/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 0.70 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 2334/MT
- Specific Gravity: 1.05 g/cc
- Melt Flow: 7.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 79
- Tensile Strength, Yield: 20.7 MPa
- Tensile Modulus: 1.447 GPa
$ 1478/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0060 cm/cm
- Melt Flow: 0.40 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 3.5 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 97
$ 1768/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 7.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
$ 1982/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 6.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 102
- Tensile Strength, Yield: 38.0 MPa
$ 1923/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Flow: 11 g/10 min @Load 3.80 kg, Temperature 300 °C
- Tensile Strength, Yield: 56.0 MPa
- Elongation at Break: 130 %
$ 1565/MT
- Density: 0.945 g/cc
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 33.0 MPa
- Elongation at Yield: 8.7 %
- Flexural Modulus: 1.685 GPa
$ 1613/MT
- Specific Gravity: 1.09 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 9.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 93
- Tensile Strength, Yield: 40.0 MPa
$ 1633/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 8.3 g/10 min @Load 5.00 kg, Temperature 260 °C
- Hardness, Rockwell R: 101
$ 2121/MT
- Specific Gravity: 1.12 g/cc
- Melt Flow: 10 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength, Yield: 44.8 MPa
- Elongation at Yield: 3.0 %
- Flexural Modulus: 2.205 GPa @Thickness 3.17 mm
$ 1583/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 13.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 115
$ 1472/MT
- Specific Gravity: 1.12 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 0.30 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 4.1 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2258/MT
- Specific Gravity: 1.04 g/cc
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 102
- Tensile Strength, Yield: 42.1 MPa
$ 2112/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 34.0 MPa
- Flexural Modulus: 2.459 GPa
$ 2035/MT
- Specific Gravity: 1.10 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 9.2 g/10 min @Load 5.00 kg, Temperature 200 °C
- Tensile Strength, Yield: 49.95 MPa
- Flexural Strength: 78.6 MPa
$ 1977/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 113
$ 2421/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 0.90 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 88
$ 1623/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0090 cm/cm
- Melt Flow: 30 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength, Yield: 62.0 MPa
- Flexural Modulus: 2.068 GPa
$ 2014/MT
- Specific Gravity: 1.44 g/cc
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength, Yield: 124 MPa
- Flexural Modulus: 6.897 GPa
- Izod Impact, Notched: 0.800 J/cm @Thickness 3.17 mm
$ 1755/MT
- Specific Gravity: 1.04 g/cc
- Melt Flow: 0.60 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 0.90 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 102
- Tensile Strength, Yield: 46.2 MPa
$ 1649/MT
- Specific Gravity: 1.07 g/cc
- Melt Flow: 2.2 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 3.6 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 44.1 MPa
- Elongation at Break: 11 %
$ 1468/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.90 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 2.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1721/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.2 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 8.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1624/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 11 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 1539/MT
- Specific Gravity: 0.904 g/cc
- Linear Mold Shrinkage: 0.038 cm/cm @Thickness 3.17 mm
- Linear Mold Shrinkage: 0.0413 cm/cm @Thickness 3.17 mm
- Melt Flow: 0.50 g/10 min @Load 1.00 kg, Temperature 235 °C
- Hardness, Shore A: 68 - 78
$ 1649/MT
- Density: 0.980 g/cc
- Melt Flow: 37 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 40 - 50
- Tensile Strength, Yield: 4.10 MPa
- Elongation at Break: 750 %
- Tear Strength: 24.5 kN/m
$ 1762/MT
- Density: 0.970 g/cc
- Hardness, Shore A: 75 - 85
- Tensile Strength, Yield: 11.0 MPa
- Elongation at Break: 800 %
- Tear Strength: 63.1 kN/m
$ 2259/MT
- Density: 0.940 g/cc
- Hardness, Shore A: 39 - 49
- Tensile Strength, Yield: 2.80 MPa
- Elongation at Break: 350 %
- Tear Strength: 28.0 kN/m
$ 1538/MT
- Density: 0.980 g/cc
- Melt Flow: 17.5 g/10 min @Load 1.00 kg, Temperature 235 °C
- Melt Flow: 33.4 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Shore A: 45 - 55
- Tensile Strength, Yield: 5.50 MPa
$ 1557/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.027 - 0.029 cm/cm @Thickness 3.17 mm
- Tensile Strength at Break: 3.20 MPa
- Elongation at Break: 415 %
- Compression Set: 30 % @Temperature 25.0 °C, Time 79200 sec
- Flammability, UL94: HB @Thickness 1.47 mm
$ 1461/MT
- Density: 0.940 g/cc
- Linear Mold Shrinkage: 0.014 - 0.016 cm/cm @Thickness 3.17 mm
- Hardness, Shore A: 70 - 80
- Tensile Strength at Break: 4.80 MPa
- Elongation at Break: 650 %
- Compression Set: 35 % @Temperature 25.0 °C, Time 79200 sec
$ 2552/MT
- Density: 0.990 g/cc
- Melt Flow: 17.5 g/10 min @Load 1.00 kg, Temperature 235 °C
- Melt Flow: 33.4 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Shore A: 40 - 50
- Tensile Strength, Yield: 5.50 MPa
$ 1469/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 11 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 1914/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 11 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 2204/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 11 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 1811/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 7.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 101
$ 1543/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 1.8 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 5.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 45.87 MPa
$ 1547/MT
- Density: 1.02 g/cc
- Linear Mold Shrinkage: 0.014 - 0.018 cm/cm
- Melt Flow: 0.90 g/10 min @Load 2.16 kg, Temperature 230 °C
- Ash: 15 %
- Tensile Strength, Yield: 31.0 MPa
$ 1712/MT
- Specific Gravity: 1.24 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.30 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 98
$ 1850/MT
- Melt Flow: 15 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Shore D: 46
- Impact Test: 6.00 J
- Impact Test: 8.00 J
- Flame Spread: 42 mm/min
- Gloss: 10 %
$ 1601/MT
- Density: 1.11 g/cc
- Melt Flow: 0.10 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 29.8 g/10 min @Load 21.6 kg, Temperature 190 °C
- Tensile Strength, Yield: 32.6 MPa
- Elongation at Break: >= 110 %
$ 1531/MT
- Specific Gravity: 1.11 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 9.2 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: 45.0 MPa
- Tensile Strength, Yield: 54.0 MPa
$ 1882/MT
- Specific Gravity: 1.22 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0090 cm/cm
- Melt Flow: 30 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength, Yield: 62.0 MPa
- Flexural Modulus: 2.068 GPa
$ 1476/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 1.4 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 88
$ 2009/MT
- Specific Gravity: 1.00 g/cc
- Melt Flow: 6.0 g/10 min @Load 10.0 kg, Temperature 230 °C
- Tensile Strength at Break: 23.4 MPa
- Tensile Strength, Yield: 28.3 MPa
- Tensile Modulus: 1.722 GPa
$ 1522/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 1.8 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 5.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 45.87 MPa
$ 1571/MT
- Specific Gravity: 1.12 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0080 cm/cm
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 112
$ 2127/MT
- Specific Gravity: 1.13 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm @Thickness 3.17 mm
- Tensile Strength, Yield: 76.0 MPa
- Elongation at Break: 50 %
- Flexural Modulus: 2.55 GPa
$ 1738/MT
- Specific Gravity: 1.50 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Tensile Strength, Yield: 103 MPa
- Flexural Modulus: 6.759 GPa
- Izod Impact, Notched: 0.641 J/cm @Thickness 3.17 mm, Temperature 23.0 °C
- Glass Content (%): 30
$ 1542/MT
- Specific Gravity: 1.24 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 5.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 98
$ 1600/MT
- Density: 1.22 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm @Thickness 1.59 mm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 81.0 MPa
- Elongation at Yield: 5.0 %
$ 1623/MT
- Specific Gravity: 1.23 g/cc
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage: 0.0020 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 120
$ 2341/MT
- Melt Flow: 15 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Shore D: 46
- Impact Test: 6.00 J
- Impact Test: 8.00 J
- Flame Spread: 42 mm/min
- Gloss: 10 %
$ 1590/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm @Thickness 3.17 mm
- Tensile Strength, Yield: 83.0 MPa
- Elongation at Break: 50 %
- Flexural Modulus: 2.86 GPa
$ 1831/MT
- Specific Gravity: 1.13 g/cc
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Flow: 10 g/10 min @Load 3.80 kg, Temperature 260 °C
- Tensile Strength, Yield: 55.1 MPa
- Flexural Modulus: 2.068 GPa
- Izod Impact, Notched: 6.675 J/cm @Thickness 3.17 mm
$ 2038/MT
- Specific Gravity: 1.05 g/cc
- Melt Flow: 0.50 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 45 %
$ 1994/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 13.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 115
$ 1540/MT
- Specific Gravity: 1.38 g/cc
- Water Absorption: 0.70 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0020 cm/cm @Thickness 3.17 mm
- Linear Mold Shrinkage: 0.0050 cm/cm @Thickness 3.17 mm
- Hardness, Rockwell R: 99
$ 1555/MT
- Specific Gravity: 1.23 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength, Yield: 62.0 MPa
- Flexural Modulus: 2.31 GPa
$ 1936/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0060 cm/cm
- Melt Flow: 8.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 85
- Tensile Strength, Yield: 34.0 MPa
$ 1563/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.2 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 4.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 100
Diamond Polymers PC 2109E UV Natural - Extrusion Grade, UV Stabilized, Flame Retardant Polycarbonate
$ 1588/MT
- Specific Gravity: 1.23 g/cc
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage: 0.0020 - 0.0070 cm/cm
- Melt Flow: 6.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 120
$ 1549/MT
- Specific Gravity: 1.12 g/cc
- Linear Mold Shrinkage: 0.015 - 0.022 cm/cm
- Melt Flow: <= 1.0 g/10 min @Load 10.0 kg, Temperature 230 °C
- Tensile Strength, Yield: 20.7 MPa
- Elongation at Yield: 100 %
$ 1590/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 0.40 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 94
$ 2073/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 12 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
- Tensile Strength, Yield: 41.3 MPa
$ 2472/MT
- Density: 0.910 g/cc
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 21.5 MPa
- Elongation at Yield: 6.0 %
- Flexural Modulus: 0.896 GPa
$ 1715/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.1 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 4.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
$ 2489/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.7 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 6.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 101
$ 2092/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 1.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 7.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 102
$ 1992/MT
- Density: 0.900 g/cc
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
- Tensile Strength, Yield: 37.2 MPa
- Elongation at Yield: 9.0 %
$ 1446/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 19 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 120
- Tensile Strength, Yield: 64.0 MPa
$ 1648/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0080 cm/cm
- Melt Flow: 1.2 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 5.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 2239/MT
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.35 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 2274/MT
- Specific Gravity: 1.053 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 1.4 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 6.2 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 112
$ 1454/MT
- Specific Gravity: 1.09 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 11.8 g/10 min @Load 5.00 kg, Temperature 265 °C
- Hardness, Rockwell R: 112
$ 2235/MT
- Specific Gravity: 1.09 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 0.20 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 1.2 g/10 min @Load 5.00 kg, Temperature 265 °C
- Hardness, Rockwell R: 112
$ 2188/MT
- Specific Gravity: 1.10 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0080 cm/cm
- Melt Flow: 1.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 4.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 111
$ 1995/MT
- Density: 0.900 g/cc
- Melt Flow: 0.80 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 24.8 MPa
- Elongation at Yield: 10 %
- Flexural Modulus: 1.102 GPa
$ 1563/MT
- Density: 0.900 g/cc
- Melt Flow: 6.0 g/10 min @Load 10.0 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
- Tensile Strength, Yield: 30.0 MPa
- Elongation at Yield: 9.0 %
$ 1811/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 4.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 13 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 100
$ 1618/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 8.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 2198/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 8.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 62.0 MPa
- Flexural Modulus: 2.277 GPa
$ 1838/MT
- Specific Gravity: 1.27 g/cc
- Water Absorption: 0.13 % @Time 86400 sec
- Hardness, Rockwell R: 106
- Tensile Strength, Yield: 50.0 MPa
- Elongation at Break: 130 %
$ 2169/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 112
$ 1876/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 25.6 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 26.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 60.0 MPa
$ 1497/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 26.4 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 53.0 MPa
- Elongation at Yield: 4.5 %
$ 1536/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 30 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength, Yield: 45.5 MPa
- Flexural Modulus: 2.143 GPa
$ 1584/MT
- Density: 1.12 g/cc
- Melt Flow: 6.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 85.0 MPa
- Elongation at Yield: 3.0 %
- Flexural Modulus: 5.27 GPa
$ 1509/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 22 g/10 min @Load 10.0 kg, Temperature 240 °C
- Tensile Strength, Yield: 51.8 MPa
- Flexural Modulus: 2.377 GPa
- Izod Impact, Notched: 0.530 J/cm @Thickness 6.35 mm, Temperature 23.0 °C
$ 1486/MT
- Density: 0.900 g/cc
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Rockwell R: 105
- Tensile Strength, Yield: 34.5 MPa
- Elongation at Yield: 8.0 %
$ 1887/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm @Thickness 3.17 mm
- Tensile Strength, Yield: 48.0 MPa
- Elongation at Break: 60 %
- Flexural Modulus: 1.71 GPa
$ 1489/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0060 cm/cm
- Melt Flow: 9.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 101
- Tensile Strength, Yield: 43.0 MPa
$ 2134/MT
- Density: 1.00 g/cc
- Filler Content: 20 %
- Melt Flow: 7.0 g/10 min @Load 10.0 kg, Temperature 230 °C
- Tensile Strength, Yield: 21.0 MPa
- Elongation at Yield: 100 %
$ 1866/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 1.8 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 5.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 26 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 1907/MT
- Density: 0.902 g/cc
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Rockwell R: 90
- Tensile Strength, Yield: 32.4 MPa
- Elongation at Yield: 10 %
$ 1574/MT
- Specific Gravity: 1.13 g/cc
- Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 51.0 MPa
- Elongation at Break: 130 %
- Flexural Strength: 77.2 MPa @Thickness 6.35 mm
$ 1488/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
$ 1891/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 7.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 101
$ 1500/MT
- Density: 0.940 g/cc
- Environmental Stress Crack Resistance: 500 hour @Thickness 3.17 mm, Temperature -40.0 °C
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.17 mm, Temperature -40.0 °C
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 21.4 MPa
$ 1696/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Flow: 18 g/10 min @Load 3.80 kg, Temperature 300 °C
- Tensile Strength, Yield: 58.0 MPa
- Elongation at Break: 110 %
$ 1474/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 15 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 98
- Tensile Strength, Yield: 42.1 MPa
$ 2093/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 7.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
$ 2501/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0050 cm/cm
- Melt Flow: 3.5 g/10 min @Load 5.00 kg, Temperature 260 °C
- Melt Flow: 3.7 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 91
$ 1527/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 28 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 118
- Tensile Strength at Break: 69.0 MPa
$ 1592/MT
- Density: 0.935 g/cc
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength, Yield: 18.6 MPa
- Elongation at Yield: 12 %
- Flexural Modulus: 0.689 GPa
- Deflection Temperature at 0.46 MPa (66 psi): 50.0 °C
$ 1473/MT
- Specific Gravity: 1.04 g/cc
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 3.0 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 102
- Tensile Strength, Yield: 46.2 MPa
$ 1724/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0090 cm/cm
- Melt Flow: 0.50 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 98
$ 1472/MT
- Specific Gravity: 1.11 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 29 g/10 min @Load 5.00 kg, Temperature 265 °C
- Tensile Strength, Yield: 41.0 MPa
- Tensile Modulus: 2.322 GPa
$ 2221/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 1.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 5.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 17.5 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2102/MT
- Density: 0.919 g/cc
- Melt Flow: 0.90 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 27.6 MPa @Thickness 0.0254 mm
- Tensile Strength at Break: 34.4 MPa @Thickness 0.0254 mm
- Elongation at Break: 550 % @Thickness 0.0254 mm
$ 1804/MT
- Specific Gravity: 1.11 g/cc
- Melt Flow: 12 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 48.9 MPa
- Flexural Modulus: 2.549 GPa
- Izod Impact, Notched: 4.81 J/cm @Thickness 3.17 mm
- Vicat Softening Point: 107 °C @Load 1.00 kg, Thickness 3.17 mm
$ 1949/MT
- Specific Gravity: 1.11 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 5.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 41.0 MPa
- Tensile Modulus: 2.322 GPa
$ 1797/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.40 - 1.2 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 100
- Tensile Strength, Yield: 36.5 MPa
$ 1567/MT
- Melt Flow: 15 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 32 g/10 min @Load 5.00 kg, Temperature 260 °C
- Hardness, Rockwell R: 115
- Tensile Strength, Yield: 54.4 MPa
- Tensile Modulus: 3.10 GPa
$ 1660/MT
- Density: 1.10 g/cc
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Yield: 3.0 %
- Flexural Modulus: 3.80 GPa
$ 2011/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.70 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1569/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 12.8 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 105
- Tensile Strength, Yield: 55.0 MPa
$ 1901/MT
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.35 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 1.3 g/10 min @Load 5.00 kg, Temperature 200 °C
$ 1791/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.2 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 8.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1549/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 30 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength, Yield: 61.0 MPa
- Flexural Modulus: 2.497 GPa
$ 1528/MT
- Specific Gravity: 1.19 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 260 °C
- Tensile Strength, Yield: 62.0 MPa
- Flexural Modulus: 2.415 GPa
$ 1574/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 0.90 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 88
$ 1977/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 0.90 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 88
$ 1530/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 11.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 58.2 MPa
- Elongation at Yield: 4.5 %
$ 1683/MT
- Density: 1.01 g/cc
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Ash: 18 - 22 %
- Tensile Strength at Break: 58.6 MPa
- Elongation at Break: 4.7 %
$ 2245/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Melt Flow: 1.3 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 5.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 122
$ 1957/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.40 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1808/MT
- Specific Gravity: 1.04 g/cc
- Melt Flow: 18 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Shore D: 79
- Tensile Strength, Yield: 34.5 MPa
- Elongation at Break: 1.2 %
$ 1692/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 25.6 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 26.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 60.0 MPa
$ 1618/MT
- Specific Gravity: 1.03 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Melt Flow: 9.6 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 26.9 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1840/MT
- Specific Gravity: 1.05 g/cc
- Melt Flow: 8.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 97
- Tensile Strength, Yield: 33.8 MPa
- Tensile Modulus: 1.70 GPa
$ 1637/MT
- Density: 1.05 g/cc
- Melt Flow: 24 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength, Yield: 70.0 MPa
- Elongation at Yield: 3.0 %
- Flexural Modulus: 3.541 GPa
$ 1635/MT
- Specific Gravity: 1.18 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 16 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 110
- Tensile Strength, Yield: 56.80 MPa
$ 1609/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 8.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 31.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 123
$ 1550/MT
- Density: 1.05 g/cc
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Ash: 18 - 22 %
- Tensile Strength, Yield: 28.0 MPa
- Elongation at Yield: 9.0 %
$ 1543/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 12 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
- Tensile Strength, Yield: 41.3 MPa
$ 1504/MT
- Specific Gravity: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 1.20 kg, Temperature 300 °C
- Hardness, Rockwell R: 120
- Tensile Strength, Yield: 62.0 MPa
$ 2105/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 3.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 9.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 120
$ 1733/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.3 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength, Yield: 39.0 MPa
- Flexural Modulus: 1.867 GPa
$ 1681/MT
- Specific Gravity: 1.17 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 3.9 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 11.8 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 61.5 MPa
$ 1707/MT
- Specific Gravity: 1.16 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 2.1 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 14 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 119
$ 1453/MT
- Specific Gravity: 1.03 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.50 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 1.7 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 101
$ 1666/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Melt Flow: 0.90 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 122
- Tensile Strength, Yield: 80.6 MPa
$ 1741/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0080 cm/cm
- Melt Flow: 0.30 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 108
- Tensile Strength, Yield: 50.0 MPa
$ 1679/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 7.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 110
$ 1459/MT
- Specific Gravity: 1.08 g/cc
- Melt Flow: 1.3 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 51.5 MPa
- Flexural Modulus: 2.625 GPa
- Izod Impact, Notched: 0.750 J/cm @Thickness 3.17 mm, Temperature 23.0 °C
- Vicat Softening Point: 131 °C @Load 1.00 kg, Thickness 3.17 mm
$ 1633/MT
- Specific Gravity: 1.14 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
- Hardness, Rockwell R: 110
- Tensile Strength, Yield: 62.1 MPa
$ 2182/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 1.7 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 6.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 101
$ 2002/MT
- Specific Gravity: 1.22 g/cc
- Water Absorption: 0.35 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 35 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1475/MT
- Specific Gravity: 1.24 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 9.4 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 98
$ 2147/MT
- Specific Gravity: 1.12 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.5 g/10 min @Load 10.0 kg, Temperature 220 °C
- Melt Flow: 5.2 g/10 min @Load 5.00 kg, Temperature 265 °C
- Hardness, Rockwell R: 115
$ 2206/MT
- Density: 0.970 g/cc
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Ash: 8.0 - 12 %
- Tensile Strength, Yield: 28.0 MPa
- Elongation at Yield: 6.0 %
$ 1756/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 12 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 106
$ 2067/MT
- Specific Gravity: 1.08 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 2.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 7.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 120
$ 1654/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0070 cm/cm
- Melt Flow: 0.50 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 2579/MT
- Specific Gravity: 1.25 g/cc
- Water Absorption: 0.14 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Tensile Strength, Yield: 131 MPa
- Elongation at Yield: 1.0 %
$ 2254/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 265 °C
- Tensile Strength, Yield: 52.0 MPa
- Flexural Modulus: 2.036 GPa
- Izod Impact, Notched: 6.94 J/cm @Thickness 3.17 mm, Temperature 23.0 °C
$ 1477/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0050 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Rockwell R: 84
- Tensile Strength, Yield: 64.0 MPa
$ 1936/MT
- Specific Gravity: 1.07 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 0.80 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.5 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 87
$ 1844/MT
- Specific Gravity: 1.05 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0080 cm/cm
- Melt Flow: 0.30 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 108
- Tensile Strength, Yield: 50.0 MPa
$ 1474/MT
- Specific Gravity: 1.21 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0080 cm/cm
- Melt Flow: 3.6 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 11.2 g/10 min @Load 3.80 kg, Temperature 230 °C
- Tensile Strength, Yield: 54.9 MPa
$ 1482/MT
- Specific Gravity: 1.10 g/cc
- Water Absorption: 1.2 % @Time 86400 sec
- Linear Mold Shrinkage: 0.015 cm/cm @Thickness 3.17 mm
- Hardness, Rockwell R: 121
- Tensile Strength, Yield: 59.0 MPa
$ 1836/MT
- Specific Gravity: 1.06 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 2.3 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 8.6 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 104
$ 1561/MT
- Specific Gravity: 1.04 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 0.60 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 2.1 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 100
$ 1895/MT
- Specific Gravity: 1.23 g/cc
- Water Absorption: 0.35 % @Temperature 23.0 °C
- Water Absorption: 0.15 % @Temperature 23.0 °C, Time 86400 sec
- Melt Flow: 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 12 g/10 min @Load 3.80 kg, Temperature 230 °C
$ 2525/MT
- Specific Gravity: 1.03 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Flow: 3.2 g/10 min @Load 5.00 kg, Temperature 200 °C
- Melt Flow: 14 g/10 min @Load 3.80 kg, Temperature 230 °C
- Hardness, Rockwell R: 103
$ 2417/MT
- Specific Gravity: 1.11 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.1 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 112
- Tensile Strength, Yield: 48.85 MPa
$ 1468/MT
- Specific Gravity: 1.26 g/cc
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Flow: 10 g/10 min @Load 1.20 kg, Temperature 300 °C
- Tensile Strength, Yield: 65.0 MPa
- Flexural Modulus: 3.307 GPa
- Izod Impact, Notched: 1.07 J/cm @Thickness 3.17 mm
$ 2598/MT
- Specific Gravity: 1.11 g/cc
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.1 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 112
- Tensile Strength, Yield: 48.8 MPa
Delivery Polymer Diamond and Network Polymers
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, oil ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
