$ 2459/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
- Tensile Strength at Break: 26.2 MPa
$ 2572/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1938/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0102 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1895/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1688/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1931/MT
- Specific Gravity: 0.950 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1559/MT
- Specific Gravity: 1.29 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage: 0.0011 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1566/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
- Tensile Strength at Break: 22.8 MPa
$ 1894/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 69
- Tensile Strength at Break: 25.5 MPa
$ 1761/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0102 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1599/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1900/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0048 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1686/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 53
- Tensile Strength at Break: 17.9 MPa
$ 1875/MT
- Specific Gravity: 1.26 g/cc
- Filler Content: 43 %
- Linear Mold Shrinkage: 0.0012 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1943/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 12 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1462/MT
- Specific Gravity: 1.25 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 79
$ 1699/MT
- Specific Gravity: 1.20 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0021 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1485/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1849/MT
- Specific Gravity: 0.960 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
$ 1584/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0125 cm/cm
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 16.5 MPa
$ 1466/MT
- Specific Gravity: 1.15 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0091 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1748/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
- Tensile Strength at Break: 17.9 MPa
$ 1500/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1824/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 22 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
$ 2525/MT
- Specific Gravity: 1.02 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 68
$ 1469/MT
- Specific Gravity: 1.25 g/cc
- Filler Content: 43 %
- Linear Mold Shrinkage: 0.0012 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1623/MT
- Specific Gravity: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 2179/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0102 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1524/MT
- Specific Gravity: 0.929 g/cc
- Linear Mold Shrinkage: 0.020 cm/cm
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 53
- Tensile Strength at Break: 10.3 MPa
$ 1705/MT
- Specific Gravity: 1.21 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1899/MT
- Specific Gravity: 1.11 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 61
$ 1459/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0032 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
$ 1712/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1938/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 69
- Tensile Strength at Break: 25.5 MPa
$ 1728/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 1459/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1561/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1703/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 25.2 MPa
$ 1853/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 25.2 MPa
$ 1444/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 2019/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 1901/MT
- Specific Gravity: 1.25 g/cc
- Filler Content: 38 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 2270/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1502/MT
- Specific Gravity: 1.01 g/cc
- Filler Content: 16 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1486/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 53
- Tensile Strength at Break: 17.9 MPa
$ 1663/MT
- Specific Gravity: 1.11 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1633/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1576/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 2140/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.0125 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
$ 2085/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0028 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 2035/MT
- Specific Gravity: 0.950 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
- Tensile Strength at Break: 34.5 MPa
$ 1641/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0028 cm/cm
- Melt Flow: 4.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 2477/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 2108/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 16.5 MPa
$ 1478/MT
- Specific Gravity: 1.26 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0075 cm/cm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 2169/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1552/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0023 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 76
$ 2099/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
- Tensile Strength at Break: 22.8 MPa
$ 1472/MT
- Specific Gravity: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Melt Flow: 0.40 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1665/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 1808/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 20.0 MPa
$ 1619/MT
- Specific Gravity: 0.970 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0032 cm/cm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1907/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 2198/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
- Tensile Strength at Break: 26.5 MPa
$ 1977/MT
- Specific Gravity: 0.910 g/cc
- Filler Content: 0.00 %
- Linear Mold Shrinkage: 0.0142 cm/cm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 69
$ 1694/MT
- Specific Gravity: 1.11 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 61
$ 1526/MT
- Specific Gravity: 1.20 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 2152/MT
- Specific Gravity: 1.11 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0119 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 2179/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1819/MT
- Specific Gravity: 0.959 g/cc
- Linear Mold Shrinkage: 0.020 cm/cm
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 58
- Tensile Strength at Break: 22.8 MPa
$ 1729/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1802/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 20.0 MPa
$ 1617/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1663/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 2415/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 2180/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1528/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0052 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 2367/MT
- Specific Gravity: 1.11 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 61
$ 1519/MT
- Specific Gravity: 1.07 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1946/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1471/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 2271/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 22.1 MPa
$ 1634/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
- Tensile Strength at Break: 24.0 MPa
$ 2132/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 1594/MT
- Specific Gravity: 0.900 g/cc
- Filler Content: 0.00 %
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
$ 1948/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 1799/MT
- Specific Gravity: 0.910 g/cc
- Filler Content: 0.00 %
- Linear Mold Shrinkage: 0.0131 cm/cm
- Melt Flow: 26 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 69
$ 2057/MT
- Specific Gravity: 1.10 g/cc
- Filler Content: 26 %
- Linear Mold Shrinkage: 0.0055 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
$ 1456/MT
- Specific Gravity: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0023 cm/cm
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1553/MT
- Specific Gravity: 0.970 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 2099/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 2169/MT
- Specific Gravity: 1.16 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1561/MT
- Specific Gravity: 0.950 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1521/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
$ 1734/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1464/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0117 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 2080/MT
- Specific Gravity: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 76
$ 1541/MT
- Specific Gravity: 0.970 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0052 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1646/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 22 %
- Linear Mold Shrinkage: 0.011 cm/cm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 2451/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1502/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 12 %
- Linear Mold Shrinkage: 0.0126 cm/cm
- Melt Flow: 0.60 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1614/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 2387/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1677/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 20.0 MPa
$ 2065/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0052 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1549/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1486/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
- Tensile Strength at Break: 26.5 MPa
$ 2137/MT
- Specific Gravity: 1.02 g/cc
- Filler Content: 18 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
$ 2138/MT
- Specific Gravity: 1.24 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1687/MT
- Specific Gravity: 1.25 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1546/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0035 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1649/MT
- Specific Gravity: 1.01 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1494/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 25.2 MPa
$ 2307/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 25.2 MPa
$ 1899/MT
- Specific Gravity: 1.26 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1613/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
- Tensile Strength at Break: 25.5 MPa
$ 1451/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.014 cm/cm
- Melt Flow: 0.60 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1600/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1912/MT
- Specific Gravity: 1.11 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1448/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1650/MT
- Specific Gravity: 1.27 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 2547/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 25.2 MPa
$ 1764/MT
- Specific Gravity: 1.01 g/cc
- Filler Content: 16 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1771/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0029 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1860/MT
- Specific Gravity: 1.09 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1482/MT
- Specific Gravity: 1.26 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1525/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 1454/MT
- Specific Gravity: 1.07 g/cc
- Filler Content: 22 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1526/MT
- Specific Gravity: 1.02 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0114 cm/cm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1603/MT
- Specific Gravity: 1.07 g/cc
- Filler Content: 21 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1464/MT
- Specific Gravity: 1.21 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0065 cm/cm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1719/MT
- Specific Gravity: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0023 cm/cm
- Melt Flow: 4.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 76
$ 1888/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 25.2 MPa
$ 1643/MT
- Specific Gravity: 1.09 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 2503/MT
- Specific Gravity: 1.02 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0114 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1887/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 19.3 MPa
$ 1922/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1880/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 25.2 MPa
$ 2473/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 12 %
- Linear Mold Shrinkage: 0.0122 cm/cm
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 68
$ 1838/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 2123/MT
- Specific Gravity: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 2403/MT
- Specific Gravity: 0.940 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 69
- Tensile Strength at Break: 26.2 MPa
$ 1456/MT
- Specific Gravity: 1.26 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1705/MT
- Specific Gravity: 1.07 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0125 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1470/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 5 %
- Linear Mold Shrinkage: 0.0035 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 46
$ 1763/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1449/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 2565/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
- Tensile Strength at Break: 26.5 MPa
$ 1942/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.0125 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
$ 1540/MT
- Specific Gravity: 1.01 g/cc
- Filler Content: 16 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
$ 1534/MT
- Specific Gravity: 1.15 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1600/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 16.5 MPa
$ 1485/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 22 %
- Linear Mold Shrinkage: 0.0125 cm/cm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1786/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1500/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 16.5 MPa
$ 1453/MT
- Specific Gravity: 1.11 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0067 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
$ 1545/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1612/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1524/MT
- Specific Gravity: 1.19 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0011 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1468/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1832/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 20.0 MPa
$ 2286/MT
- Specific Gravity: 1.27 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1565/MT
- Specific Gravity: 1.11 g/cc
- Filler Content: 26 %
- Linear Mold Shrinkage: 0.0099 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1856/MT
- Specific Gravity: 0.960 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
- Tensile Strength at Break: 34.5 MPa
$ 1622/MT
- Specific Gravity: 0.960 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0032 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 32
$ 1467/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1601/MT
- Specific Gravity: 0.950 g/cc
- Linear Mold Shrinkage: 0.0132 cm/cm
- Melt Flow: 24 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
- Tensile Strength at Break: 24.8 MPa
$ 1517/MT
- Specific Gravity: 1.25 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 2091/MT
- Specific Gravity: 1.29 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1582/MT
- Specific Gravity: 0.910 g/cc
- Filler Content: 0.00 %
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 21 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 69
$ 1613/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 1624/MT
- Specific Gravity: 1.27 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 2074/MT
- Specific Gravity: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1713/MT
- Specific Gravity: 1.26 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0087 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1550/MT
- Specific Gravity: 1.18 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0017 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1720/MT
- Specific Gravity: 0.955 g/cc
- Linear Mold Shrinkage: 0.020 cm/cm
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 58
- Tensile Strength at Break: 22.8 MPa
$ 2094/MT
- Specific Gravity: 0.920 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.0125 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
$ 2042/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0028 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1508/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 16.5 MPa
$ 2277/MT
- Specific Gravity: 1.31 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 2303/MT
- Specific Gravity: 1.11 g/cc
- Filler Content: 27 %
- Linear Mold Shrinkage: 0.0085 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 69
$ 1659/MT
- Specific Gravity: 1.07 g/cc
- Filler Content: 22 %
- Linear Mold Shrinkage: 0.011 cm/cm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1500/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 23 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1743/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
- Tensile Strength at Break: 26.5 MPa
$ 2074/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0052 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1716/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 22 %
- Linear Mold Shrinkage: 0.0125 cm/cm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1707/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 12 %
- Linear Mold Shrinkage: 0.0122 cm/cm
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 68
$ 1849/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1684/MT
- Specific Gravity: 1.13 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1824/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 2336/MT
- Specific Gravity: 1.15 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1561/MT
- Specific Gravity: 0.960 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
$ 1516/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1599/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1524/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1864/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1655/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1796/MT
- Specific Gravity: 1.09 g/cc
- Filler Content: 26 %
- Linear Mold Shrinkage: 0.0103 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1588/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1491/MT
- Specific Gravity: 1.27 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 77
$ 1500/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0067 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
$ 1592/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
- Tensile Strength at Break: 17.9 MPa
$ 1657/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1952/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 12 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1496/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1738/MT
- Specific Gravity: 0.930 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 69
- Tensile Strength at Break: 26.2 MPa
$ 2059/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 19.3 MPa
$ 2172/MT
- Specific Gravity: 0.950 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1641/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.039 cm/cm
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1563/MT
- Specific Gravity: 0.960 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
$ 1955/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1477/MT
- Specific Gravity: 1.07 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 2118/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0028 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1704/MT
- Specific Gravity: 1.18 g/cc
- Filler Content: 34 %
- Linear Mold Shrinkage: 0.0018 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1958/MT
- Specific Gravity: 1.01 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 1635/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0111 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1600/MT
- Specific Gravity: 1.16 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0113 cm/cm
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1712/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0023 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 2330/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 12 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 69
$ 1778/MT
- Specific Gravity: 1.15 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 2458/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
- Tensile Strength at Break: 34.5 MPa
$ 1633/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
- Tensile Strength at Break: 34.5 MPa
$ 1668/MT
- Specific Gravity: 1.26 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0118 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1537/MT
- Specific Gravity: 0.950 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1615/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 2188/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1893/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0029 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1534/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1685/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0085 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
$ 1726/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 12 %
- Linear Mold Shrinkage: 0.0155 cm/cm
- Melt Flow: 0.60 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1603/MT
- Specific Gravity: 1.43 g/cc
- Filler Content: 32 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1485/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 25.2 MPa
$ 1591/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1863/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 61
$ 1975/MT
- Specific Gravity: 1.26 g/cc
- Filler Content: 43 %
- Linear Mold Shrinkage: 0.0012 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 2238/MT
- Specific Gravity: 0.950 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1835/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1574/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 1684/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1735/MT
- Specific Gravity: 0.950 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1835/MT
- Specific Gravity: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1804/MT
- Specific Gravity: 1.25 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0066 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1502/MT
- Specific Gravity: 1.27 g/cc
- Filler Content: 43 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1468/MT
- Specific Gravity: 1.16 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 77
$ 2187/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1926/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0028 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 2074/MT
- Specific Gravity: 1.24 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1888/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1999/MT
- Specific Gravity: 1.01 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0023 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1558/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 2179/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.0125 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
$ 1538/MT
- Specific Gravity: 0.970 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0052 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 1608/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1635/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1498/MT
- Specific Gravity: 1.21 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1600/MT
- Specific Gravity: 0.980 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0102 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1607/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0023 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 76
$ 2129/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 2016/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0023 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 76
$ 2103/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0025 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1508/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0025 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1636/MT
- Specific Gravity: 0.950 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1840/MT
- Specific Gravity: 1.27 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 2069/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1967/MT
- Specific Gravity: 1.26 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1449/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 68
$ 1475/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 68
$ 2541/MT
- Specific Gravity: 0.960 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 60
$ 2036/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0023 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 76
$ 1481/MT
- Specific Gravity: 1.17 g/cc
- Filler Content: 33 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 2263/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
RheTech Products T30P200-01BG 30% Talc Reinforced Polypropylene Copolymer, Black, Blow Molding Grade
$ 1540/MT
- Specific Gravity: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Melt Flow: 0.70 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1996/MT
- Specific Gravity: 0.900 g/cc
- Filler Content: 0.00 %
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1882/MT
- Specific Gravity: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 2178/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1598/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 2439/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0022 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1502/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0067 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
$ 1727/MT
- Specific Gravity: 1.24 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0075 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1796/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 5 %
- Linear Mold Shrinkage: 0.0124 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1469/MT
- Specific Gravity: 1.01 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
$ 2243/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 28 %
- Linear Mold Shrinkage: 0.0067 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
$ 2080/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1681/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 63
- Tensile Strength at Break: 19.3 MPa
$ 1452/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1723/MT
- Specific Gravity: 0.900 g/cc
- Filler Content: 0.00 %
- Linear Mold Shrinkage: 0.0142 cm/cm
- Melt Flow: 32 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1977/MT
- Specific Gravity: 1.13 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0118 cm/cm
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1449/MT
- Specific Gravity: 1.09 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1701/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1456/MT
- Specific Gravity: 0.920 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1849/MT
- Specific Gravity: 0.970 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 71
$ 2005/MT
- Specific Gravity: 1.24 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0025 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 78
$ 1463/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1479/MT
- Specific Gravity: 1.20 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0026 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 77
$ 2277/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 25.2 MPa
$ 1961/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
- Tensile Strength at Break: 32.4 MPa
$ 1579/MT
- Specific Gravity: 1.20 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0026 cm/cm
- Melt Flow: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 77
$ 1870/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 67
$ 2242/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1642/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 2138/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0028 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1475/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 66
$ 1629/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1837/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
- Tensile Strength at Break: 23.4 MPa
$ 1882/MT
- Specific Gravity: 0.930 g/cc
- Filler Content: 4 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1475/MT
- Specific Gravity: 1.00 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0095 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 62
$ 1940/MT
- Specific Gravity: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1478/MT
- Specific Gravity: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0115 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 2249/MT
- Specific Gravity: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0023 cm/cm
- Melt Flow: 4.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 76
$ 1527/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 53
- Tensile Strength at Break: 17.9 MPa
$ 1891/MT
- Specific Gravity: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 2221/MT
- Specific Gravity: 0.990 g/cc
- Filler Content: 13 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1750/MT
- Specific Gravity: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0091 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1445/MT
- Specific Gravity: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0091 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 2181/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 20.7 MPa
$ 2408/MT
- Specific Gravity: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0091 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 2328/MT
- Specific Gravity: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0091 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1905/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 20.7 MPa
$ 2004/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 20.0 MPa
$ 1881/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 20.7 MPa
$ 1799/MT
- Specific Gravity: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0091 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 74
$ 1990/MT
- Specific Gravity: 1.18 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0015 cm/cm
- Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 78
$ 1872/MT
- Specific Gravity: 1.48 g/cc
- Filler Content: 32 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 72
$ 1630/MT
- Specific Gravity: 1.16 g/cc
- Filler Content: 32 %
- Linear Mold Shrinkage: 0.0025 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 77
$ 1529/MT
- Specific Gravity: 0.910 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 20.7 MPa
$ 1794/MT
- Specific Gravity: 0.950 g/cc
- Filler Content: 8 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 64
$ 1615/MT
- Specific Gravity: 1.15 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0105 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
$ 1605/MT
- Specific Gravity: 0.900 g/cc
- Linear Mold Shrinkage: 0.0137 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65
- Tensile Strength at Break: 17.9 MPa
$ 2072/MT
- Specific Gravity: 0.910 g/cc
- Filler Content: 0.00 %
- Linear Mold Shrinkage: 0.0145 cm/cm
- Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73
Delivery Polymer RheTech Products
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ships for sale greece. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
