Akro-Plastic Akromid® A3 GF 10 (2852) PA 6.6 Dry, 10% Glass Filled

Seller in São Paulo price: $2268 per MT
Seller in São Paulo price: $1486 per MT

Akro-Plastic Akromid® A3 GF 10 (2852) PA 6.6 Dry, 10% Glass Filled in Polymer, Thermoplastic, Nylon, Nylon 66, 10% Glass Fiber Filled

  • Physical Properties
  • Density
  • 1.20 g/cc @Temperature 23.0 °C
  • Filler Content
  • 10 %
  • Water Absorption
  • 2.6 - 2.8 % @Temperature 70.0 °C
  • Water Absorption at Saturation
  • 7.5 - 8.0 % @Time 82800 sec
  • Linear Mold Shrinkage, Flow
  • 0.0060 cm/cm
  • Linear Mold Shrinkage, Transverse
  • 0.015 cm/cm
  • Spiral Flow
  • 102 cm
  • Mechanical Properties
  • Tensile Strength at Break
  • 115 MPa
  • Tensile Strength at Break
  • 57.5 MPa @Temperature 160 - 175 °C, Time 1.80e+7 sec
  • Tensile Strength at Break
  • 57.5 MPa @Temperature 130 - 150 °C, Time 7.20e+7 sec
  • Elongation at Break
  • 3.5 %
  • Tensile Modulus
  • 4.80 GPa
  • Flexural Strength
  • 170 MPa
  • Flexural Modulus
  • 4.40 GPa
  • Charpy Impact Unnotched
  • 3.70 J/cm² @Temperature -30.0 °C
  • Charpy Impact Unnotched
  • 3.80 J/cm² @Temperature 23.0 °C
  • Charpy Impact, Notched
  • 0.400 J/cm² @Temperature -30.0 °C
  • Charpy Impact, Notched
  • 0.400 J/cm² @Temperature 23.0 °C
  • Thermal Properties
  • Melting Point
  • 262 °C
  • Deflection Temperature at 0.46 MPa (66 psi)
  • 260 °C
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 245 °C
  • Flammability, UL94
  • HB @Thickness 1.60 mm
  • Glow Wire Test
  • 650 °C @Thickness 1.60 mm
  • Electrical Properties
  • Volume Resistivity
  • 1.00e+13 ohm-cm
  • Surface Resistance
  • 1.00e+12 ohm
  • Comparative Tracking Index
  • 550 V
  • Processing Properties
  • Feed Temperature
  • 60.0 - 80.0 °C
  • Nozzle Temperature
  • 280 - 295 °C
  • Zone 1
  • 260 - 300 °C
  • Zone 2
  • 260 - 300 °C
  • Zone 3
  • 260 - 300 °C
  • Zone 4
  • 260 - 300 °C
  • Melt Temperature
  • 280 - 320 °C
  • Mold Temperature
  • 80.0 - 100 °C
  • Drying Temperature
  • 80.0 °C
  • Dry Time
  • 4 - 12.0 hour
  • Injection Pressure
  • 100 MPa
  • Hold Pressure
  • 75.0 MPa
  • Back Pressure
  • 0.400 - 1.00 MPa
  • Descriptive Properties
  • Rate acc. FMVSS 302 (
  • Passed
  • Rate acc. FMVSS 302,(
  • FMVSS 302, >1 [mm] Thickness
  • Resistance to Oleic acid
  • Pass
  • Resistance to Acetaldehyde
  • Fail
  • Resistance to Acetic Acid
  • Pass
  • Resistance to Acetone
  • Pass
  • Resistance to Acetonitrile
  • Pass
  • Resistance to Acrylonitrile
  • Pass
  • Resistance to Allyl alcohol
  • Fail
  • Resistance to Amyl alcohol
  • Pass
  • Resistance to Aqueous Ammonia
  • Pass
  • Resistance to Benzene
  • Fail
  • Resistance to Benzene
  • Pass
  • Resistance to Benzene
  • Pass
  • Resistance to Biodiesel
  • Pass
  • Resistance to Boric acid
  • Fail
  • Resistance to Boric acid
  • Pass
  • Resistance to Brake fluid (DOT 4)
  • Fail
  • Resistance to Brake fluid (DOT 4)
  • Pass
  • Resistance to Calcium chloride, alcoholic
  • Fail
  • Resistance to Calcium chloride, aqueous
  • Pass
  • Resistance to Carbonic acid
  • Pass
  • Resistance to Caustic potash solution, aqueous
  • Pass
  • Resistance to Chloracetic acid
  • Fail
  • Resistance to Chlorine
  • Fail
  • Resistance to Chlorine water
  • Fail
  • Resistance to Chromic acid
  • Fail
  • Resistance to Cyclohexane
  • Pass
  • Resistance to Cyclohexanol
  • Pass
  • Resistance to Dichloro-Acetic acid
  • Fail
  • Resistance to Diesel fuel (DIN 51601)
  • Pass
  • Resistance to Ethanol
  • Pass
  • Resistance to Ethylene glycol/water
  • Fail
  • Resistance to Formaldehyde, aqueous
  • Pass
  • Resistance to Formic acid
  • Fail
  • Resistance to Glycerin
  • Pass
  • Resistance to Hydraulic oil H and HL (DIN 51524)
  • Pass
  • Resistance to Hydrogen chloride, gas
  • Fail
  • Resistance to Iso-octanol
  • Pass
  • Resistance to Isopropanol
  • Pass
  • Resistance to Methanol
  • Pass
  • Resistance to Methylene chloride
  • Fail
  • Resistance to Motor oil (SAE 10W-40)
  • Pass
  • Resistance to Motor oil (SAE 10W-40)
  • Pass
  • Resistance to Natural Gas
  • Pass
  • Resistance to Nitric acid
  • Fail
  • Resistance to Ozone
  • Fail
  • Resistance to Phenol
  • Fail
  • Resistance to Phosphoric acid
  • Fail
  • Resistance to Potassium chloride, aqueous
  • Pass
  • Resistance to Potassium permanganate, aqueous
  • Fail
  • Resistance to Sodium chloride, aqueous
  • Pass
  • Resistance to Sodium hydroxide solution, aqueous
  • Pass
  • Resistance to Sodium hypochlorite, aqueous
  • Fail
  • Resistance to Transmission oil (ATF m 1375.4)
  • Pass
  • Resistance to Urea, aqueous
  • Pass
  • Resistant to Carbon disulphide
  • Pass
  • Resistant to Carbon tetrachloride
  • Pass
  • Resistant to Citric acid
  • Pass
  • Resistant to Ethyl acetate
  • Pass
  • Resistant to Hydrochloric acid
  • Fail
  • Resistant to Hydrogen peroxide
  • Fail
  • Resistant to Seawater
  • Pass
  • Resistant to Silicone fluid
  • Pass
  • Resistant to Sulphuric acid
  • Fail
  • Resistant to Super-grade petrol (DIN 51600)
  • Pass
  • Resistant to Toluol
  • Pass
  • Resistant to Water
  • Pass
  • Resistant to Xylol
  • Pass
  • Resistant to Zinc chloride, aqueous
  • Fail

Alternative products

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng tanker for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

2 prices for Akro-Plastic Akromid® A3 GF 10 (2852) PA 6.6 Dry, 10% Glass Filled

Seller from São Paulo – 2021-08-13:

Seller from São Paulo work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2268 per MT

Seller from São Paulo – 2021-08-04:

Seller from São Paulo work with company: Solvay, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1486 per MT

Share on Pinterest
Share on LinkedIn
Share on Reddit

Would you like to sell Akro-Plastic Akromid® A3 GF 10 (2852) PA 6.6 Dry, 10% Glass Filled?

Plastic warehouse

Find a direct plastic supplier if you're interested in a supplier or Astrologer in Singapore open-nearme.com