Carpenter Gall-Tough PLUS™ Stainless, Annealed price 2293 per MT

Physical Properties
Density
7.60 g/cc

Mechanical Properties
Hardness, Rockwell B
90 - 95
Tensile Strength, Ultimate
783 MPa
Tensile Strength, Ultimate
160 MPa @Temperature 871 °C
Tensile Strength, Ultimate
492 MPa @Temperature 649 °C
Tensile Strength, Ultimate
603 MPa @Temperature 427 °C
Tensile Strength, Ultimate
638 MPa @Temperature 204 °C
Tensile Strength, Yield
423 MPa @Strain 0.200 %
Tensile Strength, Yield
146 MPa @Strain 0.200 %, Temperature 871 °C
Tensile Strength, Yield
201 MPa @Strain 0.200 %, Temperature 649 °C
Tensile Strength, Yield
208 MPa @Strain 0.200 %, Temperature 427 °C
Tensile Strength, Yield
222 MPa @Strain 0.200 %, Temperature 204 °C
Elongation at Break
59 %
Elongation at Break
48 % @Temperature 649 °C
Elongation at Break
58 % @Temperature 427 °C
Elongation at Break
63 % @Temperature 204 °C
Elongation at Break
124 % @Temperature 871 °C
Reduction of Area
72 %
Reduction of Area
60 % @Temperature 649 °C
Reduction of Area
70 % @Temperature 427 °C
Reduction of Area
73 % @Temperature 204 °C
Reduction of Area
93 % @Temperature 871 °C
Modulus of Elasticity
184.9 GPa
Fatigue Strength
293 MPa @# of Cycles 1.00e+7
Charpy Impact
404 J

Thermal Properties
CTE, linear
14.19 µm/m-°C @Temperature 25.0 - 50.0 °C
CTE, linear
17.1 µm/m-°C @Temperature 25.0 - 250 °C
CTE, linear
18.07 µm/m-°C @Temperature 25.0 - 500 °C
Specific Heat Capacity
0.5055 J/g-°C @Temperature 50.0 - 100 °C
Thermal Conductivity
12.0 W/m-K
Thermal Conductivity
14.79 W/m-K @Temperature 200 °C
Thermal Conductivity
18.9 W/m-K @Temperature 400 °C
Thermal Conductivity
20.34 W/m-K @Temperature 500 °C
Maximum Service Temperature, Air
982 °C

Component Elements Properties
Carbon, C
<= 0.15 %
Chromium, Cr
16.5 - 21 %
Iron, Fe
62 %
Manganese, Mn
4.0 - 8.0 %
Molybdenum, Mo
0.50 - 2.5 %
Nickel, Ni
6.0 - 10 %
Nitrogen, N
0.050 - 0.35 %
Phosphorous, P
<= 0.040 %
Silicon, Si
2.5 - 4.5 %
Sulfur, S
<= 0.040 %

Electrical Properties
Electrical Resistivity
0.0000947 ohm-cm

Alternative products

Carpenter Gall-Tough PLUS™ Stainless, Annealed, 30% Cold Work accurate 79%

$ 1507/MT

Density: 7.60 g/cc
Tensile Strength, Ultimate: 1130 MPa
Tensile Strength, Ultimate: 1378 MPa @Temperature -73.0 °C
Tensile Strength, Yield: 855 MPa @Strain 0.200 %
Tensile Strength, Yield: 965 MPa @Strain 0.200 %, Temperature -73.0 °C

Carpenter Gall-Tough PLUS™ Stainless, Annealed, 15% Cold Work accurate 79%

$ 2118/MT

Density: 7.60 g/cc
Tensile Strength, Ultimate: 889 MPa
Tensile Strength, Ultimate: 1185 MPa @Temperature -73.0 °C
Tensile Strength, Yield: 593 MPa @Strain 0.200 %
Tensile Strength, Yield: 751 MPa @Strain 0.200 %, Temperature -73.0 °C

Carpenter Gall-Tough PLUS™ Stainless, Annealed, 0% Cold Work accurate 79%

$ 1508/MT

Density: 7.60 g/cc
Hardness, Rockwell B: 90 - 95
Tensile Strength, Ultimate: 744 MPa
Tensile Strength, Ultimate: 1027 MPa @Temperature -73.0 °C
Tensile Strength, Yield: 385 MPa @Strain 0.200 %

HP Alloys Alloy 718, 50% Cold Worked accurate 69%

$ 2144/MT

Density: 8.20 g/cc
Tensile Strength, Ultimate: 1544 MPa
Tensile Strength, Yield: 1413 MPa
Elongation at Break: 10 %
Reduction of Area: 43 %

Carpenter Gall-Tough PLUS™ Stainless, Annealed, 25% Cold Work accurate 79%

$ 1686/MT

Density: 7.60 g/cc
Tensile Strength, Ultimate: 1027 MPa
Tensile Strength, Ultimate: 1268 MPa @Temperature -73.0 °C
Tensile Strength, Yield: 744 MPa @Strain 0.200 %
Tensile Strength, Yield: 937 MPa @Strain 0.200 %, Temperature -73.0 °C

Carpenter Gall-Tough PLUS™ Stainless, Annealed, 10% Cold Work accurate 79%

$ 1924/MT

Density: 7.60 g/cc
Tensile Strength, Ultimate: 827 MPa
Tensile Strength, Ultimate: 1144 MPa @Temperature -73.0 °C
Tensile Strength, Yield: 544 MPa @Strain 0.200 %
Tensile Strength, Yield: 717 MPa @Strain 0.200 %, Temperature -73.0 °C

HP Alloys Alloy 718, 30% Cold Worked accurate 69%

$ 1951/MT

Density: 8.20 g/cc
Tensile Strength, Ultimate: 1331 MPa
Tensile Strength, Yield: 1241 MPa
Elongation at Break: 15 %
Reduction of Area: 46 %

HP Alloys Alloy 718, 50% Cold Worked, Aged accurate 69%

$ 1524/MT

Density: 8.20 g/cc
Tensile Strength, Ultimate: 1813 MPa
Tensile Strength, Yield: 1710 MPa
Elongation at Break: 8.0 %
Reduction of Area: 20 %

Carpenter Gall-Tough PLUS™ Stainless, Annealed, 20% Cold Work accurate 79%

$ 1492/MT

Density: 7.60 g/cc
Tensile Strength, Ultimate: 972 MPa
Tensile Strength, Ultimate: 1241 MPa @Temperature -73.0 °C
Tensile Strength, Yield: 675 MPa @Strain 0.200 %
Tensile Strength, Yield: 834 MPa @Strain 0.200 %, Temperature -73.0 °C

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng tankers for sale greece. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Carpenter Gall-Tough PLUS™ Stainless, Annealed

Seller from Tokyo – 2021-05-28:

Seller from Tokyo work with company: Techmer ES, Arlon, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2480 per MT

Seller from Atlanta – 2021-07-17:

Seller from Atlanta work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2293 per MT

Seller from Delhi – 2021-05-25:

Seller from Delhi work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2570 per MT