Constellium Planoxal® 50 Aluminum plate price 1646 per MT

Physical Properties
Density
2.66 g/cc

Mechanical Properties
Hardness, Brinell
75 @Thickness 20.0 - 100 mm
Hardness, Brinell
77 @Thickness 8.00 - 20.0 mm
Tensile Strength
>= 260 MPa @Thickness 80.0 - 100 mm
Tensile Strength
>= 270 MPa @Thickness 8.00 - 12.5 mm
Tensile Strength
>= 270 MPa @Thickness 12.5 - 50.0 mm
Tensile Strength
>= 270 MPa @Thickness 50.0 - 80.0 mm
Tensile Strength
295 MPa @Thickness 8.00 - 20.0 mm
Tensile Strength
295 MPa @Thickness 20.0 - 100 mm
Tensile Strength, Yield
>= 110 MPa @Strain 0.200 %, Thickness 80.0 - 100 mm
Tensile Strength, Yield
>= 115 MPa @Strain 0.200 %, Thickness 8.00 - 12.5 mm
Tensile Strength, Yield
>= 115 MPa @Strain 0.200 %, Thickness 12.5 - 50.0 mm
Tensile Strength, Yield
>= 115 MPa @Strain 0.200 %, Thickness 50.0 - 80.0 mm
Tensile Strength, Yield
140 MPa @Strain 0.200 %, Thickness 20.0 - 100 mm
Tensile Strength, Yield
150 MPa @Strain 0.200 %, Thickness 8.00 - 20.0 mm
Elongation at Break
>= 12 % @Thickness 80.0 - 100 mm
Elongation at Break
>= 14 % @Thickness 50.0 - 80.0 mm
Elongation at Break
>= 15 % @Thickness 12.5 - 50.0 mm
Elongation at Break
>= 16 % @Thickness 8.00 - 12.5 mm
Elongation at Break
23 % @Thickness 8.00 - 20.0 mm
Elongation at Break
23 % @Thickness 20.0 - 100 mm
Modulus of Elasticity
71.0 GPa

Thermal Properties
CTE, linear
23.8 µm/m-°C @Temperature 20.0 - 100 °C
Thermal Conductivity
105 - 120 W/m-K

Component Elements Properties
Aluminum, Al
92.55 - 95.55 %
Chromium, Cr
0.050 - 0.25 %
Copper, Cu
<= 0.10 %
Iron, Fe
<= 0.40 %
Magnesium, Mg
4.0 - 4.9 %
Manganese, Mn
0.40 - 1.0 %
Silicon, Si
<= 0.40 %
Zinc, Zn
<= 0.25 %
Zr+Ti
<= 0.15 %

Electrical Properties
Electrical Resistivity
0.00000590 - 0.00000660 ohm-cm

Alternative products

Indium Corp. Ga2O3 Gallium Sesquioxide accurate 66%

$ 1605/MT

Bulk Density: 0.700 g/cc
Density: 6.44 g/cc
Loss On Ignition: <= 0.10 % @Temperature 800 °C
Particle Mesh Size: -325 Mesh
Particle Mesh Size: -100 Mesh

Kazanorgsintez Bisphenol A, Diphenylpropane accurate 99%

$ 2323/MT

Crystallization Temperature: >= 154 °C
Crystallization Temperature: >= 155 °C
Crystallization Temperature: >= 156.4 °C
Crystallization Temperature: >= 156.6 °C
Crystallization Temperature: >= 156.7 °C

Constellium Formall® 545 Aluminum Alloy accurate 66%

$ 1801/MT

Density: 2.70 g/cc
Tensile Strength: 275 MPa
Tensile Strength, Yield: 125 MPa @Strain 0.200 %
Elongation at Break: 16 %
Modulus of Elasticity: 71.0 GPa

Indium Corp. Germanium Corporation® GeCl4 Germanium Tetrachloride accurate 66%

$ 1866/MT

Specific Gravity: 1.875 g/cc @Temperature 20.0 °C
Molecular Weight: 214.45 g/mol
Vapor Pressure: 0.101 bar @Temperature 20.0 °C
Boiling Point: 83.0 °C
Aluminum, Al: <= 1.0e-7 %

Osprey Metals Co 212 Cobalt Thermal Spray Powder accurate 66%

$ 2132/MT

Hardness, Rockwell C: 26 - 30
Carbon, C: <= 1.0 %
Chromium, Cr: 26.5 - 30 %
Cobalt, Co: 61.35 %
Iron, Fe: 0.25 %

PCP-Canada ALCA 5® 5083 Cast Aluminum Mold Plate accurate 66%

$ 1651/MT

Density: 2.66 g/cc
Hardness, Brinell: 70
Tensile Strength, Ultimate: 283 MPa
Tensile Strength, Yield: 124 MPa
Elongation at Break: 16 %

H.C. Starck Pure Molybdenum OMPP Pellets (99.8%) accurate 99%

$ 2379/MT

Density: >= 7.00 g/cc
Aluminum, Al: 0.0020 %
Aluminum, Al: <= 0.010 %
Calcium, Ca: 0.0010 %
Calcium, Ca: <= 0.010 %

Indium Corp. Germanium Corporation® Germanium Metal accurate 66%

$ 2337/MT

Specific Gravity: 5.323 g/cc @Temperature 20.0 °C
Molecular Weight: 72.61 g/mol
Heat of Fusion: 508.2 J/g
Heat of Vaporization: 4600 J/g
Specific Heat Capacity: 0.320 J/g-°C

PCP-Canada Max 5® 5083 Cast Aluminum Mold Block accurate 66%

$ 1868/MT

Density: 2.66 g/cc
Hardness, Brinell: 70
Tensile Strength, Ultimate: 283 MPa
Tensile Strength, Yield: 124 MPa
Elongation at Break: 16 %

Constellium PLAN 5083 Aluminum Rolled Plate accurate 66%

$ 2254/MT

Density: 2.66 g/cc
Hardness, Brinell: 76 @Thickness 20.0 - 150 mm
Hardness, Brinell: 77 @Thickness 5.00 - 20.0 mm
Tensile Strength: >= 255 MPa @Thickness 120 - 150 mm
Tensile Strength: >= 260 MPa @Thickness 80.0 - 120 mm

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, new cruise ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

2 prices for Constellium Planoxal® 50 Aluminum plate

Seller from Melbourne – 2021-07-12:

Seller from Melbourne work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1877 per MT

Seller from Philadelphia – 2021-06-13:

Seller from Philadelphia work with company: RTP Company, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1646 per MT