Daikin POLYFLON M-392 PTFE Molding Powder, Free Flow price 1880 per MT

Physical Properties
Specific Gravity
2.13 - 2.22 g/cc
Bulk Density
0.880 g/cc
Water Absorption
0.00 % @Thickness 8.50 mm, Time 86400 sec
Particle Size
400 µm
Viscosity
1.00e+13 - 1.00e+15 cP @Temperature 340 - 380 °C
Linear Mold Shrinkage
0.020 - 0.050 cm/cm
Deformation
5.0 %
Deformation
7.0 %

Mechanical Properties
Hardness, Shore D
50 - 65
Tensile Strength at Break
20.0 - 45.0 MPa
Elongation at Break
200 - 450 %
Tensile Modulus
0.392 GPa
Flexural Modulus
0.490 - 0.588 GPa
Compressive Strength
5.00 - 6.00 MPa @Temperature 25.0 °C
Izod Impact, Unnotched
1.60 J/cm
Coefficient of Friction
0.020 - 0.038
Coefficient of Friction
0.020 - 0.0385
Coefficient of Friction, Static
0.020
Taber Abrasion, mg/1000 Cycles
<= 39.6

Thermal Properties
CTE, linear
100 µm/m-°C @Temperature 23.0 - 60.0 °C
Thermal Conductivity
0.250 W/m-K
Melting Point
327 °C
Maximum Service Temperature, Air
260 °C
Flammability, UL94
V-0
Oxygen Index
>= 95 %

Electrical Properties
Volume Resistivity
<= 1.00e+18 ohm-cm
Dielectric Constant
2.1 @Frequency 1000 Hz
Dielectric Constant
2.1 @Frequency 1e+6 Hz
Dielectric Strength
19.0 kV/mm @Thickness 3.20 mm
Dissipation Factor
<= 0.000010 @Frequency 1000 Hz
Dissipation Factor
0.000020 @Frequency 1e+6 Hz

Descriptive Properties
Chemical Resistance
Excellent
Contact Angle
110
Weatherability
Excellent

Alternative products

Daikin POLYFLON MG-1431 PTFE 15% Glass Fiber and 5% MoS2 Filled Molding Powder accurate 72%

$ 1870/MT

Specific Gravity: 2.13 - 2.22 g/cc
Water Absorption: 0.00 % @Thickness 8.50 mm, Time 86400 sec
Viscosity: 1.00e+13 - 1.00e+15 cP @Temperature 340 - 380 °C
Linear Mold Shrinkage: 0.020 - 0.050 cm/cm
Deformation: 5.0 %

BASF Styrodur® 3035 CN Extruded Rigid Polystyrene Foam (Europe) accurate 99%

$ 1548/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 100 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Daikin POLYFLON F-205 PTFE Fine Powder accurate 72%

$ 2237/MT

Specific Gravity: 2.13 - 2.22 g/cc
Bulk Density: 0.475 g/cc
Water Absorption: 0.00 % @Thickness 8.50 mm, Time 86400 sec
Particle Size: 500 µm
Viscosity: 1.00e+13 - 1.00e+15 cP @Temperature 340 - 380 °C

Daikin POLYFLON M-18 PTFE Molding Powder, Fine Cut accurate 72%

$ 1953/MT

Specific Gravity: 2.13 - 2.22 g/cc
Bulk Density: 0.470 g/cc
Water Absorption: 0.00 % @Thickness 8.50 mm, Time 86400 sec
Particle Size: 38 µm
Viscosity: 1.00e+13 - 1.00e+15 cP @Temperature 340 - 380 °C

Daikin POLYFLON M-139 PTFE Molding Powder, Free Flow accurate 72%

$ 1788/MT

Specific Gravity: 2.13 - 2.22 g/cc
Bulk Density: 0.900 g/cc
Water Absorption: 0.00 % @Thickness 8.50 mm, Time 86400 sec
Particle Size: 400 µm
Viscosity: 1.00e+13 - 1.00e+15 cP @Temperature 340 - 380 °C

Daikin POLYFLON MG-1050F PTFE 25% Glass Fiber Filled Molding Powder, High Apparent Density, Free Flow accurate 72%

$ 1849/MT

Specific Gravity: 2.13 - 2.22 g/cc
Water Absorption: 0.00 % @Thickness 8.50 mm, Time 86400 sec
Viscosity: 1.00e+13 - 1.00e+15 cP @Temperature 340 - 380 °C
Linear Mold Shrinkage: 0.020 - 0.050 cm/cm
Deformation: 5.0 %

Daikin POLYFLON F-201 PTFE Fine Powder accurate 72%

$ 1987/MT

Specific Gravity: 2.13 - 2.22 g/cc
Bulk Density: 0.475 g/cc
Water Absorption: 0.00 % @Thickness 8.50 mm, Time 86400 sec
Particle Size: 500 µm
Viscosity: 1.00e+13 - 1.00e+15 cP @Temperature 340 - 380 °C

BASF Styrodur® 2800 C Extruded Rigid Polystyrene Foam (Europe) accurate 99%

$ 2010/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 5.0 %
Water Vapor Transmission: 80.0 - 200 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 4000 CS Extruded Rigid Polystyrene Foam (Europe) accurate 99%

$ 2342/MT

Density: 0.0350 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 80.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 3035 CS Extruded Rigid Polystyrene Foam (Europe) accurate 99%

$ 2271/MT

Density: 0.0330 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 50.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, tanker for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Daikin POLYFLON M-392 PTFE Molding Powder, Free Flow

Seller from Belo Horizonte – 2021-03-27:

Seller from Belo Horizonte work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1880 per MT

Seller from Seoul – 2021-05-19:

Seller from Seoul work with company: Techmer ES, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1936 per MT

Seller from Lagos – 2021-03-27:

Seller from Lagos work with company: RTP Company, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2228 per MT