Hexion Bakelite™ PF 1141 Phenolic Formaldehyde Resin, High Surface Quality, Resistant to High Temperatures, Dishwasher Proof price 1530 per MT

Physical Properties
Density
1.51 g/cc
Apparent Bulk Density
0.770 g/cc
Linear Mold Shrinkage, Flow
0.0050 cm/cm

Mechanical Properties
Ball Indentation Hardness
350 MPa
Flexural Strength
90.0 MPa
Flexural Modulus
8.50 GPa
Compressive Strength
200 MPa
Charpy Impact Unnotched
0.600 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.140 J/cm² @Temperature 23.0 °C

Thermal Properties
Maximum Service Temperature, Air
150 °C
Maximum Service Temperature, Air
250 °C
Deflection Temperature at 8.0 MPa
135 °C
Shrinkage
0.300 % @Temperature 110 °C, Time 605000 sec

Electrical Properties
Volume Resistivity
1.00e+11 ohm-cm
Surface Resistance
1.00e+10 ohm
Dielectric Constant
13 @Frequency 100 Hz
Dielectric Strength
5.00 kV/mm @Thickness 1.00 mm
Dissipation Factor
0.20 @Frequency 100 Hz

Processing Properties
Feed Temperature
60.0 - 75.0 °C
Nozzle Temperature
80.0 - 100 °C
Melt Temperature
80.0 - 100 °C
Mold Temperature
160 - 190 °C
Mold Temperature
160 - 190 °C
Injection Pressure
>= 15.0 MPa
Back Pressure
0.500 - 2.00 MPa
Cure Time
0.167 - 0.333 min
Cure Time
0.333 - 0.667 min

Descriptive Properties
Chromatic Spectrum
All Colors
Creep Rupture Strength
Very Good
Holding Pressure
Approximately 40-60% of injection pressure
Media Resistance
Very Good
Moisture Absorption
5 mg
Reserves by Peak Temperature
Very High
Thermal Expansion
Very Slight

Alternative products

Hexion Bakelite™ PF 2855 Phenolic Formaldehyde Resin, High Surface Quality, Low Shrinkage, For Electrostatic Coating, Dishwasher Proof, UL Listed accurate 90%

$ 1985/MT

Density: 1.51 g/cc
Apparent Bulk Density: 0.770 g/cc
Linear Mold Shrinkage, Flow: 0.0050 cm/cm
Flexural Strength: 90.0 MPa
Flexural Modulus: 8.50 GPa

Hexion Bakelite™ PF 2736 Phenolic Formaldehyde Resin, Improved Electrical Properties, Low Shrinkage, UL Listed &nbs accurate 81%

$ 1555/MT

Density: 1.56 g/cc
Apparent Bulk Density: 0.730 g/cc
Linear Mold Shrinkage, Flow: 0.0030 cm/cm
Linear Mold Shrinkage, Flow: 0.0060 cm/cm
Ball Indentation Hardness: 350 MPa

Hexion Bakelite™ PF 14694 Phenolic Formaldehyde Resin, High Surface Quality (discontinued **) accurate 72%

$ 2239/MT

Density: 1.41 g/cc
Apparent Bulk Density: 0.610 g/cc
Linear Mold Shrinkage, Flow: 0.0065 cm/cm
Flexural Strength: 90.0 MPa
Flexural Modulus: 7.50 GPa

Hexion Bakelite™ PF 83 Phenolic Formaldehyde Resin, Special Preparation Cylindrical Pellets (discontinued **) accurate 72%

$ 1895/MT

Density: 1.42 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0035 cm/cm
Ball Indentation Hardness: 250 MPa
Flexural Strength: 90.0 MPa

Hexion Bakelite™ PF 13591 Phenolic Formaldehyde Resin, High Surface Quality, UL Listed (discontinued **) accurate 72%

$ 2020/MT

Density: 1.41 g/cc
Apparent Bulk Density: 0.620 g/cc
Linear Mold Shrinkage, Flow: 0.0065 cm/cm
Flexural Strength: 90.0 MPa
Flexural Modulus: 7.00 GPa

Hexion Bakelite™ PF 2836 Phenolic Formaldehyde Resin, Improved Electrical Properties, Low Shrinkage, UL Listed &nbs accurate 72%

$ 1481/MT

Density: 1.64 g/cc
Apparent Bulk Density: 0.740 g/cc
Linear Mold Shrinkage, Flow: 0.0040 cm/cm
Tensile Strength at Break: 45.0 MPa
Tensile Modulus: 11.0 GPa

Hexion Bakelite™ X65 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 81%

$ 2324/MT

Density: 1.51 g/cc
Apparent Bulk Density: 0.680 g/cc
Linear Mold Shrinkage, Flow: 0.0055 cm/cm
Linear Mold Shrinkage, Flow: 0.0075 cm/cm
Ball Indentation Hardness: 275 MPa

Hexion Bakelite™ PF 2400 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof, UL Listed (disc accurate 72%

$ 1511/MT

Density: 1.47 g/cc
Apparent Bulk Density: 0.650 g/cc
Linear Mold Shrinkage, Flow: 0.0035 cm/cm
Linear Mold Shrinkage, Flow: 0.0075 cm/cm
Ball Indentation Hardness: 350 MPa

Hexion Bakelite™ X30 Phenolic Formaldehyde Resin (discontinued **) accurate 72%

$ 1868/MT

Density: 1.40 g/cc
Apparent Bulk Density: 0.460 g/cc
Linear Mold Shrinkage, Flow: 0.0055 cm/cm
Ball Indentation Hardness: 250 MPa
Tensile Strength at Break: 50.0 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, decommissioned ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Hexion Bakelite™ PF 1141 Phenolic Formaldehyde Resin, High Surface Quality, Resistant to High Temperatures, Dishwasher Proof

Seller from Boston – 2021-07-11:

Seller from Boston work with company: Solvay, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2336 per MT

Seller from Barcelona – 2021-03-16:

Seller from Barcelona work with company: RTP Company, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1749 per MT

Seller from Bengalūru – 2021-07-22:

Seller from Bengalūru work with company: PolyOne Corporation, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1530 per MT