Hexion Bakelite™ PF 2137 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof (discontinued ** price 1821 per MT

Physical Properties
Density
1.42 g/cc
Apparent Bulk Density
0.620 g/cc
Linear Mold Shrinkage, Flow
0.0040 cm/cm
Linear Mold Shrinkage, Flow
0.0090 cm/cm

Mechanical Properties
Ball Indentation Hardness
350 MPa
Flexural Strength
95.0 MPa
Flexural Modulus
7.50 GPa
Compressive Strength
250 MPa
Charpy Impact Unnotched
0.700 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.150 J/cm² @Temperature 23.0 °C

Thermal Properties
Maximum Service Temperature, Air
145 °C
Maximum Service Temperature, Air
240 °C
Deflection Temperature at 8.0 MPa
125 °C
Shrinkage
0.350 % @Temperature 110 °C
Shrinkage
0.450 % @Temperature 110 °C, Time 605000 sec

Electrical Properties
Volume Resistivity
1.00e+11 ohm-cm
Surface Resistance
1.00e+10 ohm
Dielectric Constant
8.0 @Frequency 100 Hz
Dielectric Strength
25.0 kV/mm @Thickness 1.00 mm
Dissipation Factor
0.25 @Frequency 100 Hz
Comparative Tracking Index
125 V

Processing Properties
Feed Temperature
60.0 - 75.0 °C
Nozzle Temperature
80.0 - 100 °C
Melt Temperature
80.0 - 100 °C
Mold Temperature
160 - 190 °C
Mold Temperature
160 - 190 °C
Injection Pressure
>= 15.0 MPa
Back Pressure
0.500 - 2.00 MPa
Cure Time
0.167 - 0.333 min
Cure Time
0.333 - 0.667 min

Descriptive Properties
Chromatic Spectrum
All Colors
Creep Rupture Strength
Very Good
Holding Pressure
Approximately 40-60% of injection pressure
Media Resistance
Very Good
Moisture Absorption
50 mg
Reserves by Peak Temperature
Very High
Thermal Expansion
Very Slight

Alternative products

Hexion Bakelite™ PF 2736 Phenolic Formaldehyde Resin, Improved Electrical Properties, Low Shrinkage, UL Listed &nbs accurate 72%

$ 1555/MT

Density: 1.56 g/cc
Apparent Bulk Density: 0.730 g/cc
Linear Mold Shrinkage, Flow: 0.0030 cm/cm
Linear Mold Shrinkage, Flow: 0.0060 cm/cm
Ball Indentation Hardness: 350 MPa

Hexion Bakelite™ PF 7400 Phenolic Formaldehyde Resin, High Mechanical Strength (discontinued **) accurate 66%

$ 2053/MT

Density: 1.38 g/cc
Linear Mold Shrinkage, Flow: 0.0025 cm/cm
Ball Indentation Hardness: 250 MPa
Tensile Strength at Break: 35.0 MPa
Tensile Modulus: 7.00 GPa

Hexion Bakelite™ PF 6501 Phenolic Formaldehyde Resin, Low Shrinkage accurate 66%

$ 1809/MT

Density: 1.60 g/cc
Apparent Bulk Density: 0.640 g/cc
Linear Mold Shrinkage, Flow: 0.0017 cm/cm
Linear Mold Shrinkage, Flow: 0.0018 cm/cm
Ball Indentation Hardness: 400 MPa

Hexion Bakelite™ PF 83 Phenolic Formaldehyde Resin, Special Preparation Cylindrical Pellets (discontinued **) accurate 66%

$ 1895/MT

Density: 1.42 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0035 cm/cm
Ball Indentation Hardness: 250 MPa
Flexural Strength: 90.0 MPa

Hexion Bakelite™ PF 14600 Phenolic Formaldehyde Resin, High Surface Quality (discontinued **) accurate 66%

$ 2467/MT

Density: 1.37 g/cc
Apparent Bulk Density: 0.550 g/cc
Linear Mold Shrinkage, Flow: 0.0065 cm/cm
Flexural Strength: 95.0 MPa
Flexural Modulus: 7.00 GPa

Hexion Bakelite™ PF 31 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 86%

$ 2167/MT

Density: 1.42 g/cc
Apparent Bulk Density: 0.630 g/cc
Linear Mold Shrinkage, Flow: 0.0040 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Ball Indentation Hardness: 325 MPa

Hexion Bakelite™ X65 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 72%

$ 2324/MT

Density: 1.51 g/cc
Apparent Bulk Density: 0.680 g/cc
Linear Mold Shrinkage, Flow: 0.0055 cm/cm
Linear Mold Shrinkage, Flow: 0.0075 cm/cm
Ball Indentation Hardness: 275 MPa

Hexion Bakelite™ PF 2400 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof, UL Listed (disc accurate 92%

$ 1511/MT

Density: 1.47 g/cc
Apparent Bulk Density: 0.650 g/cc
Linear Mold Shrinkage, Flow: 0.0035 cm/cm
Linear Mold Shrinkage, Flow: 0.0075 cm/cm
Ball Indentation Hardness: 350 MPa

Hexion Bakelite™ PF 51 Phenolic Formaldehyde Resin, Special Preparation Cylindrical Pellets (discontinued **) accurate 66%

$ 1482/MT

Density: 1.41 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0035 cm/cm
Ball Indentation Hardness: 300 MPa
Flexural Strength: 85.0 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, oil/chemical tanker for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for Hexion Bakelite™ PF 2137 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof (discontinued **

Seller from Ahmadābād – 2021-04-29:

Seller from Ahmadābād work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1981 per MT

Seller from Chongqing – 2021-07-30:

Seller from Chongqing work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2124 per MT

Seller from Shanghai – 2021-06-01:

Seller from Shanghai work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1821 per MT

Seller from Shenzhen – 2021-08-09:

Seller from Shenzhen work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co.

Price: $2540 per MT