LG Chemical GPPS 15NF(I) PS, High Transparency, Heat Resistance price 1785 per MT

Physical Properties
Specific Gravity
1.04 g/cc
Maximum Moisture Content
0.010
Linear Mold Shrinkage, Flow
0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
Melt Flow
10 g/10 min @Load 5.00 kg, Temperature 200 °C
Melt Flow
28 g/10 min @Load 3.80 kg, Temperature 230 °C
Melt Flow
120 g/10 min @Load 10.0 kg, Temperature 220 °C

Mechanical Properties
Hardness, Rockwell R
121
Tensile Strength, Yield
46.1 MPa @Thickness 3.20 mm
Elongation at Break
4.0 % @Thickness 3.20 mm
Tensile Modulus
2.85 GPa @Thickness 3.20 mm
Flexural Yield Strength
84.3 MPa @Thickness 3.20 mm
Flexural Modulus
3.26 GPa @Thickness 3.20 mm
Izod Impact, Notched
0.0981 J/cm @Thickness 6.40 mm, Temperature 23.0 °C
Izod Impact, Notched
0.0981 J/cm @Thickness 6.40 mm, Temperature -30.0 °C

Thermal Properties
Deflection Temperature at 0.46 MPa (66 psi)
93.0 °C @Thickness 6.40 mm
Deflection Temperature at 1.8 MPa (264 psi)
87.0 °C @Thickness 6.40 mm
Vicat Softening Point
95.0 °C @Load 5.00 kg
UL RTI, Electrical
50.0 °C @Thickness >=1.50 mm
UL RTI, Electrical
50.0 °C @Thickness >=3.00 mm
UL RTI, Mechanical with Impact
50.0 °C @Thickness >=1.50 mm
UL RTI, Mechanical with Impact
50.0 °C @Thickness >=3.00 mm
UL RTI, Mechanical without Impact
50.0 °C @Thickness >=1.50 mm
UL RTI, Mechanical without Impact
50.0 °C @Thickness >=3.00 mm
Flammability, UL94
HB @Thickness >=1.50 mm
Flammability, UL94
HB @Thickness >=3.00 mm

Electrical Properties
Dielectric Strength
40.0 kV/mm
Arc Resistance
120 - 180 sec
Hot Wire Ignition, HWI
7.0 - 15 sec @Thickness >=1.50 mm
Hot Wire Ignition, HWI
15 - 30 sec @Thickness >=3.00 mm
High Amp Arc Ignition, HAI
60 - 120 arcs @Thickness 1.50 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 3.00 mm
High Voltage Arc-Tracking Rate, HVTR
10.0 - 25.4 mm/min

Processing Properties
Rear Barrel Temperature
170 - 190 °C
Middle Barrel Temperature
180 - 200 °C
Front Barrel Temperature
190 - 210 °C
Nozzle Temperature
190 - 220 °C
Melt Temperature
190 - 220 °C
Mold Temperature
40.0 - 70.0 °C
Drying Temperature
80.0 °C
Dry Time
2.00 - 4.00 hour
Back Pressure
29.4 - 58.8 MPa
Screw Speed
30 - 60 rpm

Alternative products

ChevronTexaco 46 Heat Transfer Oil accurate 88%

$ 2438/MT

Specific Gravity: 0.3215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

LG Chemical GPPS 20HR(E) PS, High Transparency, Heat Resistance accurate 77%

$ 1497/MT

Specific Gravity: 1.05 g/cc
Maximum Moisture Content: 0.010
Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
Melt Flow: 6.0 g/10 min @Load 5.00 kg, Temperature 200 °C
Melt Flow: 17 g/10 min @Load 3.80 kg, Temperature 230 °C

LG Chemical GPPS 20HR(E) PS, High Transparency, Heat Resistance accurate 77%

$ 1749/MT

Specific Gravity: 1.05 g/cc
Maximum Moisture Content: 0.010
Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
Melt Flow: 6.0 g/10 min @Load 5.00 kg, Temperature 200 °C
Melt Flow: 17 g/10 min @Load 3.80 kg, Temperature 230 °C

LG Chemical GPPS 20HR(E) PS, High Transparency, Heat Resistance accurate 77%

$ 2517/MT

Specific Gravity: 1.05 g/cc
Maximum Moisture Content: 0.010
Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm @Thickness 3.20 mm
Melt Flow: 6.0 g/10 min @Load 5.00 kg, Temperature 200 °C
Melt Flow: 17 g/10 min @Load 3.80 kg, Temperature 230 °C

ChevronTexaco Texatherm® accurate 99%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 2128 QSI Quantum Silicones 28 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1508/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

ChevronTexaco 22 Heat Transfer Oil accurate 88%

$ 2024/MT

Specific Gravity: 0.6083 g/cc
Specific Gravity: 0.655 g/cc
Specific Gravity: 0.6916 g/cc
Specific Gravity: 0.729 g/cc
Specific Gravity: 0.7658 g/cc

Lanxess Durethan® BKV 35 H3.0 000000 Nylon 6, Glass Fiber Reinforced accurate 77%

$ 1985/MT

Specific Gravity: 1.41 g/cc
Moisture Absorption at Equilibrium: 1.9 %
Water Absorption at Saturation: 6.5 %
Linear Mold Shrinkage, Flow: 0.00030 cm/cm
Linear Mold Shrinkage, Flow: 0.00050 cm/cm

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, buy chemical tanker for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for LG Chemical GPPS 15NF(I) PS, High Transparency, Heat Resistance

Seller from Tehran – 2021-07-21:

Seller from Tehran work with company: RTP Company, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co., ALIMEX GmbH

Price: $1785 per MT

Seller from Porto Alegre – 2021-07-26:

Seller from Porto Alegre work with company: Solvay, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co., ALIMEX GmbH

Price: $2306 per MT

Seller from Lagos – 2021-03-04:

Seller from Lagos work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2399 per MT