LG Chemical LI912 ASA price 1523 per MT

Physical Properties
Specific Gravity
1.07 g/cc
Maximum Moisture Content
0.010
Linear Mold Shrinkage, Flow
0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow
12 g/10 min @Load 10.0 kg, Temperature 220 °C

Mechanical Properties
Hardness, Rockwell R
103
Tensile Strength, Yield
47.1 MPa @Thickness 3.20 mm
Elongation at Break
25 % @Thickness 3.20 mm
Elongation at Yield
>= 6.0 % @Thickness 3.20 mm
Tensile Modulus
2.08 GPa @Thickness 3.20 mm
Flexural Yield Strength
75.5 MPa @Thickness 3.20 mm
Flexural Modulus
2.21 GPa @Thickness 3.20 mm
Izod Impact, Notched
0.392 J/cm @Thickness 3.20 mm, Temperature -30.0 °C
Izod Impact, Notched
0.392 J/cm @Thickness 6.40 mm, Temperature -30.0 °C
Izod Impact, Notched
1.57 J/cm @Thickness 6.40 mm, Temperature 23.0 °C
Izod Impact, Notched
1.77 J/cm @Thickness 3.20 mm, Temperature 23.0 °C

Thermal Properties
Deflection Temperature at 0.46 MPa (66 psi)
96.0 °C @Thickness 6.40 mm
Deflection Temperature at 1.8 MPa (264 psi)
87.0 °C @Thickness 6.40 mm
Vicat Softening Point
95.0 °C @Load 5.00 kg
UL RTI, Electrical
50.0 °C @Thickness >=1.50 mm
UL RTI, Electrical
50.0 °C @Thickness >=3.00 mm
UL RTI, Electrical
50.0 °C @Thickness >=6.00 mm
UL RTI, Mechanical with Impact
50.0 °C @Thickness >=1.50 mm
UL RTI, Mechanical with Impact
50.0 °C @Thickness >=3.00 mm
UL RTI, Mechanical with Impact
50.0 °C @Thickness >=6.00 mm
UL RTI, Mechanical without Impact
50.0 °C @Thickness >=1.50 mm
UL RTI, Mechanical without Impact
50.0 °C @Thickness >=3.00 mm
UL RTI, Mechanical without Impact
50.0 °C @Thickness >=6.00 mm
Flammability, UL94
HB @Thickness >=1.60 mm
Flammability, UL94
HB @Thickness >=3.20 mm
Flammability, UL94
HB @Thickness >=6.00 mm

Electrical Properties
Volume Resistivity
1.00e+15 ohm-cm
Dielectric Strength
27.0 kV/mm
Arc Resistance
60 - 120 sec
Hot Wire Ignition, HWI
7.0 - 15 sec @Thickness >=1.50 mm
Hot Wire Ignition, HWI
15 - 30 sec @Thickness >=3.00 mm
Hot Wire Ignition, HWI
15 - 30 sec @Thickness >=6.00 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 1.50 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 3.00 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 6.00 mm

Processing Properties
Rear Barrel Temperature
180 - 200 °C
Middle Barrel Temperature
190 - 210 °C
Front Barrel Temperature
210 - 220 °C
Nozzle Temperature
210 - 220 °C
Melt Temperature
200 - 230 °C
Mold Temperature
40.0 - 80.0 °C
Drying Temperature
80.0 - 90.0 °C
Dry Time
2.00 - 3.00 hour
Back Pressure
0.490 - 0.981 MPa
Screw Speed
50 - 100 rpm

Alternative products

ChevronTexaco 46 Heat Transfer Oil accurate 88%

$ 2438/MT

Specific Gravity: 0.3215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 113 QSI Quantum Silicones 13 Durometer Condensation Cured Moldmaking Material accurate 77%

$ 2505/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.23 g/cc
Specific Gravity: 1.23 g/cc

ChevronTexaco Texatherm® accurate 99%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 2128 QSI Quantum Silicones 28 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1508/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc

ACC QM 122 QSI Quantum Silicones 22 Durometer Condensation Cured Moldmaking Material accurate 66%

$ 2077/MT

Specific Gravity: 0.970 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.25 g/cc
Specific Gravity: 1.25 g/cc

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

ChevronTexaco 22 Heat Transfer Oil accurate 88%

$ 2024/MT

Specific Gravity: 0.6083 g/cc
Specific Gravity: 0.655 g/cc
Specific Gravity: 0.6916 g/cc
Specific Gravity: 0.729 g/cc
Specific Gravity: 0.7658 g/cc

ACC QM 107 QSI Quantum Silicones 7 Durometer Condensation Cure Moldmaking Material accurate 77%

$ 1982/MT

Specific Gravity: 0.950 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.20 g/cc
Specific Gravity: 1.20 g/cc

ACC QM 118 QSI Quantum Silicones 18 Durometer Condensation Cured Moldmaking Material accurate 77%

$ 1483/MT

Specific Gravity: 0.950 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.24 g/cc
Specific Gravity: 1.24 g/cc

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, commercial ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for LG Chemical LI912 ASA

Seller from Khartoum – 2021-03-07:

Seller from Khartoum work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2043 per MT

Seller from Sūrat – 2021-05-09:

Seller from Sūrat work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1818 per MT

Seller from Hong Kong – 2021-04-19:

Seller from Hong Kong work with company: Solvay, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1523 per MT