LG Chemical LUCEL N109LD POM, Chemical Resistance price 2020 per MT

Physical Properties
Specific Gravity
1.41 g/cc
Maximum Moisture Content
0.10
Linear Mold Shrinkage, Flow
0.018 - 0.021 cm/cm @Thickness 3.20 mm
Melt Flow
9.0 g/10 min @Load 2.16 kg, Temperature 190 °C

Mechanical Properties
Hardness, Rockwell R
82
Tensile Strength, Yield
60.8 MPa @Thickness 3.20 mm
Elongation at Break
65 % @Thickness 3.20 mm
Flexural Yield Strength
89.2 MPa @Thickness 6.40 mm
Flexural Modulus
2.55 GPa @Thickness 6.40 mm
Izod Impact, Notched
0.686 J/cm @Thickness 6.40 mm, Temperature 23.0 °C

Thermal Properties
Deflection Temperature at 0.46 MPa (66 psi)
160 °C @Thickness 6.40 mm
Deflection Temperature at 1.8 MPa (264 psi)
110 °C @Thickness 6.40 mm
UL RTI, Electrical
110 °C @Thickness >=0.710 mm
UL RTI, Electrical
110 °C @Thickness >=1.50 mm
UL RTI, Electrical
110 °C @Thickness >=3.00 mm
UL RTI, Mechanical with Impact
95.0 °C @Thickness >=0.710 mm
UL RTI, Mechanical with Impact
95.0 °C @Thickness >=1.50 mm
UL RTI, Mechanical with Impact
95.0 °C @Thickness >=3.00 mm
UL RTI, Mechanical without Impact
100 °C @Thickness >=0.710 mm
UL RTI, Mechanical without Impact
100 °C @Thickness >=1.50 mm
UL RTI, Mechanical without Impact
100 °C @Thickness >=3.00 mm
Flammability, UL94
HB @Thickness >=0.710 mm
Flammability, UL94
HB @Thickness >=1.50 mm
Flammability, UL94
HB @Thickness >=3.00 mm

Electrical Properties
Volume Resistivity
1.00e+14 ohm-cm
Surface Resistance
1.00e+16 ohm
Dielectric Constant
3.8 @Frequency 1.00e+6 Hz
Dielectric Strength
24.0 kV/mm @Thickness 1.00 mm
Hot Wire Ignition, HWI
0.00 - 7.0 sec @Thickness >=0.710 mm
Hot Wire Ignition, HWI
7.0 - 15 sec @Thickness >=3.00 mm
Hot Wire Ignition, HWI
7.0 - 15 sec @Thickness >=1.50 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 3.00 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 1.50 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 0.710 mm

Processing Properties
Rear Barrel Temperature
160 - 180 °C
Middle Barrel Temperature
180 - 200 °C
Front Barrel Temperature
190 - 200 °C
Nozzle Temperature
190 - 200 °C
Melt Temperature
190 - 200 °C
Mold Temperature
60.0 - 80.0 °C
Drying Temperature
90.0 - 110 °C
Dry Time
3.00 - 6.00 hour
Back Pressure
4.02 - 8.04 MPa
Screw Speed
50 - 100 rpm

Alternative products

ChevronTexaco 46 Heat Transfer Oil accurate 77%

$ 2438/MT

Specific Gravity: 0.3215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

LG Chemical LUCEL N145LD POM, Chemical Resistance accurate 88%

$ 1962/MT

Specific Gravity: 1.41 g/cc
Maximum Moisture Content: 0.10
Linear Mold Shrinkage, Flow: 0.018 - 0.021 cm/cm @Thickness 3.20 mm
Melt Flow: 45 g/10 min @Load 2.16 kg, Temperature 190 °C
Hardness, Rockwell R: 82

LG Chemical LUCEL N109WR POM, Chemical Resistance accurate 88%

$ 1783/MT

Specific Gravity: 1.41 g/cc
Maximum Moisture Content: 0.10
Linear Mold Shrinkage, Flow: 0.018 - 0.021 cm/cm @Thickness 3.20 mm
Melt Flow: 9.0 g/10 min @Load 2.16 kg, Temperature 190 °C
Hardness, Rockwell R: 82

ACC QM 113 QSI Quantum Silicones 13 Durometer Condensation Cured Moldmaking Material accurate 77%

$ 2505/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.23 g/cc
Specific Gravity: 1.23 g/cc

ChevronTexaco Texatherm® accurate 99%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 2128 QSI Quantum Silicones 28 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1508/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

LG Chemical LUCEL N109LDS POM, Chemical Resistance accurate 88%

$ 1898/MT

Specific Gravity: 1.41 g/cc
Maximum Moisture Content: 0.10
Linear Mold Shrinkage, Flow: 0.018 - 0.021 cm/cm @Thickness 3.20 mm
Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 190 °C
Hardness, Rockwell R: 82

ChevronTexaco 22 Heat Transfer Oil accurate 88%

$ 2024/MT

Specific Gravity: 0.6083 g/cc
Specific Gravity: 0.655 g/cc
Specific Gravity: 0.6916 g/cc
Specific Gravity: 0.729 g/cc
Specific Gravity: 0.7658 g/cc

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, chemical tankers for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

5 prices for LG Chemical LUCEL N109LD POM, Chemical Resistance

Seller from Dongguan – 2021-07-18:

Seller from Dongguan work with company: PolyOne Corporation, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2303 per MT

Seller from Chengdu – 2021-03-08:

Seller from Chengdu work with company: RTP Company, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $2489 per MT

Seller from Rangoon – 2021-04-12:

Seller from Rangoon work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2020 per MT

Seller from Guangzhou – 2021-03-04:

Seller from Guangzhou work with company: 3M, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2216 per MT

Seller from Rio de Janeiro – 2021-07-16:

Seller from Rio de Janeiro work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), BASF

Price: $2459 per MT