LG Chemical LUMAX HR5157 PBT+ABS+GF15%, Heat Resistance price 1721 per MT

Physical Properties
Specific Gravity
1.33 g/cc
Maximum Moisture Content
0.020
Linear Mold Shrinkage, Flow
0.0040 - 0.0090 cm/cm @Thickness 3.20 mm

Mechanical Properties
Tensile Strength, Yield
77.5 MPa @Thickness 3.20 mm
Elongation at Break
3.0 % @Thickness 3.20 mm
Flexural Yield Strength
127 MPa @Thickness 3.20 mm
Flexural Modulus
4.41 GPa @Thickness 3.20 mm
Izod Impact, Notched
0.785 J/cm @Thickness 3.20 mm, Temperature 23.0 °C

Thermal Properties
Melting Point
225 °C
Deflection Temperature at 1.8 MPa (264 psi)
175 °C @Thickness 6.40 mm
UL RTI, Electrical
50.0 °C @Thickness >=1.50 mm
UL RTI, Electrical
50.0 °C @Thickness >=3.00 mm
UL RTI, Mechanical with Impact
50.0 °C @Thickness >=1.50 mm
UL RTI, Mechanical with Impact
50.0 °C @Thickness >=3.00 mm
UL RTI, Mechanical without Impact
50.0 °C @Thickness >=1.50 mm
UL RTI, Mechanical without Impact
50.0 °C @Thickness >=3.00 mm
Flammability, UL94
HB @Thickness >=1.50 mm
Flammability, UL94
HB @Thickness >=3.00 mm

Electrical Properties
Volume Resistivity
1.00e+15 ohm-cm
Dielectric Strength
21.0 kV/mm @Thickness 1.00 mm
Arc Resistance
120 - 180 sec
Comparative Tracking Index
250 V
Hot Wire Ignition, HWI
7.0 - 15 sec @Thickness >=1.50 mm
Hot Wire Ignition, HWI
15 - 30 sec @Thickness >=3.00 mm
High Amp Arc Ignition, HAI
30 - 60 arcs @Thickness 1.50 mm
High Amp Arc Ignition, HAI
30 - 60 arcs @Thickness 3.00 mm
High Voltage Arc-Tracking Rate, HVTR
25.4 - 50.0 mm/min

Processing Properties
Rear Barrel Temperature
225 - 235 °C
Middle Barrel Temperature
230 - 245 °C
Front Barrel Temperature
245 - 255 °C
Nozzle Temperature
245 - 255 °C
Melt Temperature
245 - 255 °C
Mold Temperature
60.0 - 90.0 °C
Drying Temperature
100 °C
Dry Time
4.00 - 5.00 hour

Alternative products

LG Chemical LUMAX HR5107 PBT+ABS+GF10%, Heat Resistance accurate 99%

$ 1567/MT

Specific Gravity: 1.25 g/cc
Maximum Moisture Content: 0.020
Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
Tensile Strength, Yield: 65.7 MPa @Thickness 3.20 mm
Elongation at Break: 4.0 % @Thickness 3.20 mm

LG Chemical LUMAX GP5306F PBT+ABS+GF30%, Flame Retardant accurate 79%

$ 1617/MT

Specific Gravity: 1.50 g/cc
Maximum Moisture Content: 0.020
Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
Tensile Strength, Yield: 108 MPa @Thickness 3.20 mm
Elongation at Break: 3.0 % @Thickness 3.20 mm

Celanese CELANEX 3316 PBT, 30% Glass Reinforced accurate 69%

$ 1484/MT

Specific Gravity: 1.66 g/cc
Density: 1.66 g/cc
Moisture Absorption: 0.160 %
Linear Mold Shrinkage, Flow: 0.00300 - 0.00500 cm/cm
Linear Mold Shrinkage, Flow: 0.00100 - 0.00800 cm/cm

ACC QM 113 QSI Quantum Silicones 13 Durometer Condensation Cured Moldmaking Material accurate 69%

$ 2505/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.23 g/cc
Specific Gravity: 1.23 g/cc

ChevronTexaco Texatherm® accurate 89%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 2128 QSI Quantum Silicones 28 Durometer Condensation Cure Moldmaking Material accurate 79%

$ 1508/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 79%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

LG Chemical LUMAX GP5106FI PBT+ABS+GF10%, Flame Retardant accurate 89%

$ 2064/MT

Specific Gravity: 1.40 g/cc
Maximum Moisture Content: 0.020
Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
Tensile Strength, Yield: 55.9 MPa @Thickness 3.20 mm
Elongation at Break: 3.0 % @Thickness 3.20 mm

ChevronTexaco 22 Heat Transfer Oil accurate 79%

$ 2024/MT

Specific Gravity: 0.6083 g/cc
Specific Gravity: 0.655 g/cc
Specific Gravity: 0.6916 g/cc
Specific Gravity: 0.729 g/cc
Specific Gravity: 0.7658 g/cc

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, dredgers for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for LG Chemical LUMAX HR5157 PBT+ABS+GF15%, Heat Resistance

Seller from Bogotá – 2021-05-05:

Seller from Bogotá work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1728 per MT

Seller from Hyderabad – 2021-06-02:

Seller from Hyderabad work with company: Solvay, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $2565 per MT

Seller from Baghdad – 2021-07-09:

Seller from Baghdad work with company: RTP Company, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1721 per MT