LG Chemical Lupox® GP1000A PBT price 1460 per MT

Physical Properties
Specific Gravity
1.30 g/cc
Maximum Moisture Content
0.020
Linear Mold Shrinkage, Flow
0.018 cm/cm @Thickness 3.20 mm

Mechanical Properties
Tensile Strength, Yield
58.8 MPa @Thickness 3.20 mm
Elongation at Break
50 % @Thickness 3.20 mm
Flexural Yield Strength
89.2 MPa @Thickness 3.20 mm
Flexural Modulus
2.82 GPa @Thickness 3.20 mm
Izod Impact, Notched
0.363 J/cm @Thickness 3.20 mm, Temperature 23.0 °C

Thermal Properties
Melting Point
225 °C
Deflection Temperature at 0.46 MPa (66 psi)
170 °C @Thickness 6.40 mm
Deflection Temperature at 1.8 MPa (264 psi)
61.0 °C @Thickness 6.40 mm
UL RTI, Electrical
140 °C @Thickness >=0.710 mm
UL RTI, Electrical
140 °C @Thickness >=1.50 mm
UL RTI, Electrical
140 °C @Thickness >=3.30 mm
UL RTI, Mechanical with Impact
130 °C @Thickness >=0.710 mm
UL RTI, Mechanical with Impact
130 °C @Thickness >=1.50 mm
UL RTI, Mechanical with Impact
130 °C @Thickness >=3.30 mm
UL RTI, Mechanical without Impact
140 °C @Thickness >=0.710 mm
UL RTI, Mechanical without Impact
140 °C @Thickness >=1.50 mm
UL RTI, Mechanical without Impact
140 °C @Thickness >=3.30 mm
Flammability, UL94
HB @Thickness >=0.710 mm
Flammability, UL94
HB @Thickness >=1.50 mm
Flammability, UL94
HB @Thickness >=3.30 mm

Electrical Properties
Volume Resistivity
1.00e+17 ohm-cm
Dielectric Strength
23.0 kV/mm @Thickness 1.00 mm
Arc Resistance
120 - 180 sec
Comparative Tracking Index
600 V
Hot Wire Ignition, HWI
7.0 - 15 sec @Thickness >=1.50 mm
Hot Wire Ignition, HWI
15 - 30 sec @Thickness >=3.30 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 1.50 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 3.30 mm

Processing Properties
Rear Barrel Temperature
245 - 255 °C
Middle Barrel Temperature
245 - 260 °C
Front Barrel Temperature
245 - 260 °C
Nozzle Temperature
250 - 265 °C
Mold Temperature
40.0 - 80.0 °C
Drying Temperature
100 - 120 °C
Dry Time
3.00 - 5.00 hour

Alternative products

ChevronTexaco 46 Heat Transfer Oil accurate 88%

$ 2438/MT

Specific Gravity: 0.3215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ChevronTexaco Texatherm® accurate 99%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 2128 QSI Quantum Silicones 28 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1508/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

LG Chemical Lupox® DP1000DU PBT accurate 99%

$ 2397/MT

Specific Gravity: 1.31 g/cc
Maximum Moisture Content: 0.020
Linear Mold Shrinkage, Flow: 0.020 - 0.021 cm/cm @Thickness 3.20 mm
Tensile Strength, Yield: 57.9 MPa @Thickness 3.20 mm
Elongation at Break: 100 % @Thickness 3.20 mm

LG Chemical Lupox® GP1000D PBT accurate 99%

$ 2538/MT

Specific Gravity: 1.30 g/cc
Maximum Moisture Content: 0.020
Linear Mold Shrinkage, Flow: 0.018 cm/cm @Thickness 3.20 mm
Tensile Strength, Yield: 58.8 MPa @Thickness 3.20 mm
Elongation at Break: 40 % @Thickness 3.20 mm

LG Chemical Lupox® GP1000H PBT accurate 99%

$ 1787/MT

Specific Gravity: 1.28 g/cc
Maximum Moisture Content: 0.020
Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm @Thickness 3.20 mm
Melt Flow: 45 g/10 min @Load 2.16 kg, Temperature 250 °C
Tensile Strength, Yield: 47.1 MPa @Thickness 3.20 mm

LG Chemical Lupox® GP1000M PBT accurate 99%

$ 1826/MT

Specific Gravity: 1.28 g/cc
Maximum Moisture Content: 0.020
Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm @Thickness 3.20 mm
Melt Flow: 35 g/10 min @Load 2.16 kg, Temperature 250 °C
Tensile Strength, Yield: 46.1 MPa @Thickness 3.20 mm

LG Chemical Lupox® GP1000S PBT accurate 99%

$ 1602/MT

Specific Gravity: 1.30 g/cc
Maximum Moisture Content: 0.020
Linear Mold Shrinkage, Flow: 0.012 - 0.020 cm/cm @Thickness 3.20 mm
Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 250 °C
Tensile Strength, Yield: 58.8 MPa @Thickness 3.20 mm

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lpg tankers for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

5 prices for LG Chemical Lupox® GP1000A PBT

Seller from Shenzhen – 2021-05-06:

Seller from Shenzhen work with company: Hexcel, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1469 per MT

Seller from Dallas – 2021-04-09:

Seller from Dallas work with company: RTP Company, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1651 per MT

Seller from São Paulo – 2021-04-17:

Seller from São Paulo work with company: Solvay, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2477 per MT

Seller from Taipei – 2021-06-19:

Seller from Taipei work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1460 per MT

Seller from Shenzhen – 2021-07-13:

Seller from Shenzhen work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2354 per MT