Master Bond EP112LS Two part, heat curing epoxy for potting, encapsulation, coating, sealing and impregnation price 1458 per MT

Physical Properties
Viscosity
20 - 80 cP @Temperature 23.9 °C
Viscosity
50 - 200 cP @Temperature 23.9 °C
Viscosity
100 - 500 cP @Temperature 23.9 °C

Mechanical Properties
Hardness, Shore D
>= 85
Tensile Strength at Break
>= 75.8 MPa
Elongation at Break
<= 3 %
Tensile Modulus
>= 2.07 GPa @Temperature 149 °C
Tensile Modulus
>= 2.76 GPa @Temperature 23.9 °C
Compressive Strength
>= 138 MPa

Thermal Properties
Maximum Service Temperature, Air
232 °C
Minimum Service Temperature, Air
-51.1 °C

Optical Properties
Refractive Index
1.55

Electrical Properties
Volume Resistivity
>= 1.00e+10 ohm-cm @Temperature 150 °C
Volume Resistivity
>= 1.00e+12 ohm-cm @Temperature 100 °C
Volume Resistivity
>= 1.00e+14 ohm-cm @Temperature 25.0 °C
Dielectric Constant
3.1 @Frequency 60.0 Hz, Temperature 25.0 °C
Dielectric Constant
3.2 @Frequency 60.0 Hz, Temperature 100 °C
Dielectric Constant
3.2 @Frequency 1.00e+6 Hz, Temperature 25.0 °C
Dielectric Constant
3.3 @Frequency 1000 Hz, Temperature 25.0 °C
Dielectric Constant
3.4 @Frequency 1000 Hz, Temperature 100 °C
Dielectric Constant
3.4 @Frequency 1.00e+6 Hz, Temperature 100 °C
Dielectric Constant
3.6 @Frequency 1.00e+6 Hz, Temperature 150 °C
Dielectric Constant
3.7 @Frequency 60.0 Hz, Temperature 150 °C
Dielectric Constant
4.0 @Frequency 1000 Hz, Temperature 150 °C
Dissipation Factor
0.0030 @Frequency 60.0 Hz, Temperature 100 °C
Dissipation Factor
0.0030 @Frequency 60.0 Hz, Temperature 150 °C
Dissipation Factor
0.0040 @Frequency 1000 Hz, Temperature 100 °C
Dissipation Factor
0.0050 @Frequency 60.0 Hz, Temperature 25.0 °C
Dissipation Factor
0.0070 @Frequency 1000 Hz, Temperature 25.0 °C
Dissipation Factor
0.013 @Frequency 1.00e+6 Hz, Temperature 25.0 °C
Dissipation Factor
0.015 @Frequency 1.00e+6 Hz, Temperature 100 °C
Dissipation Factor
0.020 @Frequency 1.00e+6 Hz, Temperature 150 °C
Dissipation Factor
0.070 @Frequency 1000 Hz, Temperature 150 °C

Processing Properties
Cure Time
60.0 - 120 min @Temperature 93.3 - 98.9 °C
Cure Time
180 - 240 min @Temperature 121 °C
Pot Life
2880 - 4320 min @Temperature 23.9 °C
Shelf Life
12.0 Month @Temperature 23.9 °C

Descriptive Properties
Mixing Ratio (A to B)
100:80

Alternative products

Styrolution Luran® 368 R SAN accurate 70%

$ 1856/MT

Density: 1.08 g/cc
Linear Mold Shrinkage: 0.0050 cm/cm
Melt Flow: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
Tensile Strength at Break: 104 MPa @Temperature -40.0 °C
Tensile Strength, Ultimate: 75.0 MPa

SABIC Innovative Plastics NORYL NH7111E PPE+HIPS (Asia Pacific) accurate 56%

$ 1461/MT

Specific Gravity: 1.24 g/cc
Density: 1.24 g/cc
Moisture Absorption: 0.0700 %
Water Absorption at Saturation: 0.23 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm

Celanese Celanex® 3116 PBT, 7.5% Glass Reinforced accurate 56%

$ 1468/MT

Specific Gravity: 1.50 g/cc
Density: 1.50 g/cc
Moisture Absorption at Equilibrium: 0.20 %
Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm
Linear Mold Shrinkage, Flow: 0.010 - 0.014 cm/cm

SABIC Innovative Plastics LNP THERMOCOMP WFB62 PBT accurate 56%

$ 1883/MT

Specific Gravity: 1.60 g/cc
Density: 1.60 g/cc
Moisture Absorption: 0.0300 %
Moisture Absorption: 0.0500 %
Linear Mold Shrinkage, Flow: >= 0.020 cm/cm @Time 86400 sec

SABIC Innovative Plastics Noryl PX0346 PPE+PS accurate 70%

$ 1858/MT

Specific Gravity: 1.07 g/cc
Density: 1.07 g/cc
Moisture Absorption at Equilibrium: 0.050 %
Water Absorption at Saturation: 0.25 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm

Master Bond EP42-2LV Epoxy Resists Heat and Chemicals accurate 56%

$ 1458/MT

Viscosity: 30 - 70 cP
Viscosity: 10000 - 14000 cP
Hardness, Shore D: >= 75
Tensile Strength at Break: >= 68.9 MPa
Elongation at Break: 3.4 %

Styrolution Luran® 358 N SAN accurate 56%

$ 1572/MT

Density: 1.08 g/cc
Moisture Absorption at Equilibrium: 0.20 %
Linear Mold Shrinkage: 0.0050 cm/cm
Melt Flow: 22 g/10 min @Load 10.0 kg, Temperature 220 °C
Tensile Strength at Break: 96.0 MPa @Temperature -40.0 °C

SABIC Innovative Plastics Valox® K4530 PBT (Europe-Africa-Middle East) accurate 70%

$ 1587/MT

Specific Gravity: 1.41 g/cc
Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
Melt Index of Compound: 17 g/10 min @Load 2.16 kg, Temperature 250 °C
Tensile Strength at Break: 82.0 MPa

Master Bond EP42HT-2ND-2Med Heat Resistant, Medical Grade Non-Drip Epoxy accurate 70%

$ 1444/MT

Viscosity: >= 200000 cP
Viscosity: >= 1.00e+6 cP
Hardness, Shore D: >= 75
Tensile Strength: >= 82.7 MPa
Elongation at Break: <= 3.0 %

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ships for sale norway. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

5 prices for Master Bond EP112LS Two part, heat curing epoxy for potting, encapsulation, coating, sealing and impregnation

Seller from Bangkok – 2021-07-02:

Seller from Bangkok work with company: Solvay, Techmer ES, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1458 per MT

Seller from Taipei – 2021-07-01:

Seller from Taipei work with company: RTP Company, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2592 per MT

Seller from Xi’an – 2021-03-11:

Seller from Xi’an work with company: Solvay, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2265 per MT

Seller from Santiago – 2021-05-11:

Seller from Santiago work with company: Solvay, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $1719 per MT

Seller from Barcelona – 2021-04-22:

Seller from Barcelona work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), BASF

Price: $2262 per MT