Parker Chomerics THERM-A-FORM T646 Cure-in-Place Potting and Underfill Material price 1573 per MT

Physical Properties
Specific Gravity
2.45 g/cc
Viscosity
3.0 cP
Outgassing - Total Mass Loss
0.10 %
Outgassing - Total Mass Loss
0.17 %

Mechanical Properties
Hardness, Shore A
50

Thermal Properties
CTE, linear
250 µm/m-°C
Specific Heat Capacity
1.00 J/g-°C
Thermal Conductivity
0.900 W/m-K
Maximum Service Temperature, Air
150 °C
Minimum Service Temperature, Air
-50.0 °C
Brittleness Temperature
-55.0 °C
Flammability, UL94
HB

Electrical Properties
Volume Resistivity
1.00e+14 ohm-cm
Dielectric Constant
6.5 @Frequency 1.00e+6 Hz
Dielectric Strength
10.0 kV/mm
Dissipation Factor
0.013 @Frequency 1.00e+6 Hz

Processing Properties
Cure Time
3.00 min @Temperature 150 °C
Cure Time
60.0 min @Temperature 60.0 °C
Cure Time
2880 min @Temperature 23.0 °C
Pot Life
300 min @Temperature 23.0 °C
Shelf Life
3.00 Month

Descriptive Properties
Binder
Silicone
Color
Yellow
Extractable Silicone
0.15
Filler
Aluminum Oxide
Mix Ratio
1:1
Number of Components
2-part

Alternative products

Fujipoly Industries Zebra® 1002 Carbon Solid Self-Supported Connectors accurate 37%

$ 1726/MT

Hardness, Shore A: 10
Hardness, Shore A: 25
Hardness, Shore A: 55
Hardness, Shore A: 73
Tensile Strength, Yield: 2.90 MPa

Eastman Eastobond 19412 Copolyester, Film accurate 37%

$ 2553/MT

Specific Gravity: 1.33 g/cc
Bulk Density: 0.715 g/cc
Density: 1.31 g/cc
Melt Density: 1.20 g/cc @Temperature 285 °C
Water Vapor Transmission: 39.0 g/m²/day

Lord Adhesives 7542 Urethane Adhesive accurate 49%

$ 1606/MT

Density: 1.23 - 1.27 g/cc
Density: 1.23 - 1.27 g/cc
Density: 1.23 - 1.27 g/cc
Density: 1.23 - 1.27 g/cc
Density: 1.37 - 1.41 g/cc

Parker Chomerics THERM-A-GAP™ TS15 Thermally Conductive Gap Filler Pad accurate 49%

$ 2134/MT

Specific Gravity: 2.20 g/cc
Thickness: 1000 - 5000 microns
Deformation: 3.0 % @Diameter 12.7 mm, Pressure 0.0345 MPa
Deformation: 5.0 % @Diameter 12.7 mm, Pressure 0.0689 MPa
Deformation: 7.0 % @Diameter 12.7 mm, Pressure 0.172 MPa

Parker Chomerics THERM-A-FORM T644 Cure-in-Place Potting and Underfill Material accurate 49%

$ 1532/MT

Specific Gravity: 1.45 g/cc
Viscosity: 2.5 cP
Outgassing - Total Mass Loss: 0.29 %
Outgassing - Total Mass Loss: 0.39 %
Hardness, Shore A: 15

NuSil MED-4950 Liquid Silicone Rubber - Restricted Medical Use accurate 37%

$ 2296/MT

Specific Gravity: 1.15 g/cc
Hardness, Shore A: 50
Hardness, Shore A: 45 - 55
Tensile Strength at Break: 6.90 MPa
Tensile Strength at Break: 9.00 MPa

Parker Chomerics THERM-A-FORM T647 Cure-in-Place Potting and Underfill Material accurate 87%

$ 1445/MT

Specific Gravity: 2.08 g/cc
Viscosity: >= 5.0 cP
Hardness, Shore A: 25
CTE, linear: 150 µm/m-°C
Specific Heat Capacity: 0.900 J/g-°C

Park Electrochemical Nelco® N4000-12 High Speed/Low Loss, CAF Resistant Laminate and Prepreg accurate 37%

$ 1690/MT

Density: 1.90 g/cc
Water Absorption: 0.090 %
Modulus of Elasticity: 23.4 GPa
Modulus of Elasticity: 28.3 GPa
Poissons Ratio: 0.14

Celanese GUR 4170 PE-UHMW, Unfilled accurate 37%

$ 2103/MT

Specific Gravity: 0.930 g/cc
Density: 0.930 g/cc
Density of Compound: 0.930 g/cc
Moisture Absorption: <= 0.0100 %
Water Absorption at Saturation: <= 0.0100 %

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, small cruise ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

5 prices for Parker Chomerics THERM-A-FORM T646 Cure-in-Place Potting and Underfill Material

Seller from Saint Petersburg – 2021-04-24:

Seller from Saint Petersburg work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2252 per MT

Seller from Madrid – 2021-03-22:

Seller from Madrid work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1627 per MT

Seller from Los Angeles – 2021-03-19:

Seller from Los Angeles work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2396 per MT

Seller from Philadelphia – 2021-06-03:

Seller from Philadelphia work with company: 3M, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1573 per MT

Seller from Boston – 2021-05-31:

Seller from Boston work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1721 per MT