Parker Chomerics THERM-A-GAP 580 Thermally Conductive Gap Filler price 1644 per MT

Physical Properties
Specific Gravity
2.90 g/cc
Thickness
508 - 5080 microns
Deformation
7.0 % @Thickness 2.54 mm, Pressure 0.0689 MPa
Deformation
7.0 % @Thickness 3.17 mm, Pressure 0.0345 MPa
Deformation
10 % @Thickness 3.17 mm, Pressure 0.0689 MPa
Deformation
12 % @Thickness 2.54 mm, Pressure 0.138 MPa
Deformation
13 % @Thickness 2.54 mm, Pressure 0.0689 MPa
Deformation
17 % @Thickness 2.54 mm, Pressure 0.0000400 MPa
Deformation
18 % @Thickness 2.54 mm, Pressure 0.138 MPa
Deformation
20 % @Thickness 3.17 mm, Pressure 0.172 MPa
Deformation
24 % @Thickness 2.54 mm, Pressure 0.414 MPa
Deformation
25 % @Thickness 2.54 mm, Pressure 0.276 MPa
Deformation
30 % @Thickness 3.17 mm, Pressure 0.345 MPa
Deformation
30 % @Thickness 2.54 mm, Pressure 0.552 MPa
Deformation
31 % @Thickness 2.54 mm, Pressure 0.414 MPa
Deformation
37 % @Thickness 2.54 mm, Pressure 0.552 MPa
Deformation
39 % @Thickness 2.54 mm, Pressure 0.689 MPa
Deformation
40 % @Thickness 2.54 mm, Pressure 0.689 MPa
Deformation
43 % @Thickness 2.54 mm, Pressure 0.827 MPa
Deformation
46 % @Thickness 2.54 mm, Pressure 0.827 MPa
Outgassing - Total Mass Loss
0.050 %
Outgassing - Total Mass Loss
0.18 %

Mechanical Properties
Hardness, Shore OO
45

Thermal Properties
CTE, linear
270 µm/m-°C
Specific Heat Capacity
1.00 J/g-°C
Thermal Conductivity
3.00 W/m-K
Maximum Service Temperature, Air
200 °C
Minimum Service Temperature, Air
-55.0 °C
Flammability, UL94
V-0

Electrical Properties
Volume Resistivity
1.00e+14 ohm-cm
Dielectric Constant
8.0 @Frequency 1.00e+6 Hz
Dielectric Strength
7.87 kV/mm
Dissipation Factor
0.010 @Frequency 1.00e+6 Hz

Processing Properties
Shelf Life
18.0 Month
Shelf Life
24.0 Month

Descriptive Properties
Carrier
G=Fiberglass, A=Aluminum
Color
Yellow

Alternative products

Parker Chomerics THERM-A-GAP™ 579 Thermally Conductive Gap Filler Pad accurate 99%

$ 1541/MT

Specific Gravity: 2.90 g/cc
Thickness: 250 - 5000 microns
Deformation: 22 % @Thickness 3.17 mm, Pressure 0.0345 MPa
Deformation: 33 % @Thickness 3.17 mm, Pressure 0.0689 MPa
Deformation: 55 % @Thickness 3.17 mm, Pressure 0.172 MPa

Parker Chomerics THERM-A-GAP™ 569 Thermally Conductive Gap Filler Pad accurate 99%

$ 1715/MT

Specific Gravity: 2.20 g/cc
Thickness: 250 - 5000 microns
Deformation: 20 % @Thickness 3.17 mm, Pressure 0.0345 MPa
Deformation: 30 % @Thickness 3.17 mm, Pressure 0.0689 MPa
Deformation: 50 % @Thickness 3.17 mm, Pressure 0.172 MPa

Parker Chomerics CHO-THERM® T441 0.46 mm Commercial Grade Thermally Conductive Electrical Insulator Pad accurate 70%

$ 1937/MT

Specific Gravity: 2.45 g/cc
Thickness: 435 - 485 microns
Hardness, Shore A: 80
Tensile Strength: 13.8 MPa
Elongation at Break: 40 %

Parker Chomerics THERM-A-GAP™ HCS10 Thermally Conductive Gap Filler Pad accurate 99%

$ 1714/MT

Specific Gravity: 2.00 g/cc
Thickness: 250 - 5000 microns
Deformation: 26 % @Thickness 3.17 mm, Pressure 0.0345 MPa
Deformation: 36 % @Thickness 3.17 mm, Pressure 0.0689 MPa
Deformation: 59 % @Thickness 3.17 mm, Pressure 0.172 MPa

Parker Chomerics THERM-A-GAP™ GEL T636 Dispensable, Very Low Compression Force, Thermal Gap Filler accurate 70%

$ 2273/MT

Specific Gravity: 1.20 g/cc
Thickness: 0.380 microns
Deformation: 6.0 % @Thickness 2.54 mm, Pressure 0.00689 MPa
Deformation: 23 % @Thickness 2.54 mm, Pressure 0.0138 MPa
Deformation: 25 % @Thickness 2.54 mm, Pressure 0.0207 MPa

Parker Chomerics THERM-A-GAP™ GEL T630G Dispensable, Very Low Compression Force, Thermal Gap Filler accurate 70%

$ 1575/MT

Specific Gravity: 2.25 g/cc
Thickness: 250 microns
Deformation: 36 % @Thickness 2.54 mm, Pressure 0.00689 MPa
Deformation: 47 % @Thickness 2.54 mm, Pressure 0.0138 MPa
Deformation: 54 % @Thickness 2.54 mm, Pressure 0.0207 MPa

Parker Chomerics THERM-A-GAP™ GEL 8010 High Performance Fully Cured Dispensable Gel accurate 85%

$ 2043/MT

Specific Gravity: 2.70 g/cc
Thickness: >= 50.0 microns
Deformation: 27 % @Pressure 0.00345 MPa
Deformation: 45 % @Pressure 0.00689 MPa
Deformation: 52 % @Pressure 0.0103 MPa

Parker Chomerics THERM-A-GAP 570 Thermally Conductive Gap Filler accurate 99%

$ 2239/MT

Specific Gravity: 2.20 g/cc
Thickness: 508 - 5080 microns
Deformation: 10 % @Thickness 3.17 mm, Pressure 0.0345 MPa
Deformation: 15 % @Thickness 3.17 mm, Pressure 0.0689 MPa
Deformation: 25 % @Thickness 3.17 mm, Pressure 0.172 MPa

Parker Chomerics THERM-A-GAP™ GEL 30 High Performance Fully Cured Dispensable Gel accurate 85%

$ 1936/MT

Specific Gravity: 3.20 g/cc
Thickness: >= 100 microns
Deformation: 22 % @Pressure 0.00345 MPa
Deformation: 41 % @Pressure 0.00689 MPa
Deformation: 47 % @Pressure 0.0103 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ships sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Parker Chomerics THERM-A-GAP 580 Thermally Conductive Gap Filler

Seller from Delhi – 2021-03-09:

Seller from Delhi work with company: Solvay, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co., ALIMEX GmbH

Price: $2029 per MT

Seller from Barcelona – 2021-04-01:

Seller from Barcelona work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2561 per MT

Seller from Bangkok – 2021-08-01:

Seller from Bangkok work with company: RTP Company, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1644 per MT