Quadrant EPP Duratron® PAI T4503 PAI, unfilled, compression moulded (ISO Data) price 1517 per MT

Physical Properties
Density
1.41 g/cc
Moisture Absorption at Equilibrium
2.5 %
Water Absorption at Saturation
4.4 %

Mechanical Properties
Hardness, Rockwell E
80
Hardness, Shore D
88
Ball Indentation Hardness
200 MPa
Tensile Strength
150 MPa
Elongation at Break
20 %
Elongation at Yield
9.0 %
Tensile Modulus
4.20 GPa
Flexural Strength
178 MPa
Compressive Strength
34.0 MPa @Strain 1 %
Compressive Strength
67.0 MPa @Strain 2 %
Compressive Strength
135 MPa @Strain 5 %
K Factor (ISO)
1.0 µm/km
Charpy Impact Unnotched
NB
Charpy Impact, Notched
1.50 J/cm²
Coefficient of Friction, Dynamic
0.35 - 0.60
Limiting Pressure Velocity
0.200 MPa-m/sec
Limiting Pressure Velocity
0.320 MPa-m/sec

Thermal Properties
CTE, linear
40.0 µm/m-°C @Temperature 23.0 - 100 °C
Thermal Conductivity
0.260 W/m-K
Maximum Service Temperature, Air
250 °C
Deflection Temperature at 1.8 MPa (264 psi)
280 °C
Glass Transition Temp, Tg
280 °C
Flammability, UL94
V-0
Oxygen Index
45 %

Electrical Properties
Volume Resistivity
>= 1.0e+14 ohm-cm
Surface Resistivity per Square
>= 1.0e+13 ohm
Dielectric Constant
4.2 @Frequency >=100000 Hz
Dielectric Strength
24.0 kV/mm
Dissipation Factor
0.026 @Frequency 100000 Hz
Comparative Tracking Index
175 V

Compliance Properties
3A-Dairy
No
European Food 1935/2004
No
FDA
No
USP Class VI
No

Chemical Resistance Properties
Acids, Strong (pH 1-3)
Limited
Acids, Weak
Acceptable
Alcohols
Acceptable
Alkalies, Strong (pH 11-14)
Unacceptable
Alkalies, Weak
Limited
Chlorinated Solvents
Acceptable
Continuous Sunlight
Limited
Hot Water / Steam
Limited
Hydrocarbons - Aliphatic
Acceptable
Hydrocarbons - Aromatic
Acceptable
Inorganic Salt Solutions
Acceptable
Ketones, Esters
Acceptable

Alternative products

Quadrant EPP Ketron® GF30 PEEK + glassfibres, extruded (ISO Data) accurate 52%

$ 1575/MT

Density: 1.51 g/cc
Moisture Absorption at Equilibrium: 0.16 %
Water Absorption at Saturation: 0.35 %
Hardness, Rockwell M: 100
Hardness, Shore D: 87

BASF Styrodur® 3035 CN Extruded Rigid Polystyrene Foam (Europe) accurate 64%

$ 1548/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 100 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 2800 C Extruded Rigid Polystyrene Foam (Europe) accurate 64%

$ 2010/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 5.0 %
Water Vapor Transmission: 80.0 - 200 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 4000 CS Extruded Rigid Polystyrene Foam (Europe) accurate 64%

$ 2342/MT

Density: 0.0350 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 80.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 3035 CS Extruded Rigid Polystyrene Foam (Europe) accurate 64%

$ 2271/MT

Density: 0.0330 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 50.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Quadrant EPP Nylatron® GSM PA 6 + MoS2, cast (ISO Data) accurate 52%

$ 1560/MT

Density: 1.16 g/cc
Moisture Absorption at Equilibrium: 2.4 %
Water Absorption at Saturation: 6.7 %
Hardness, Rockwell M: 84
Hardness, Shore D: 80

Quadrant EPP Ketron® 1000 PEEK unfilled, extruded (ISO Data) accurate 52%

$ 2061/MT

Density: 1.31 g/cc
Moisture Absorption at Equilibrium: 0.20 %
Water Absorption at Saturation: 0.45 %
Outgassing - Total Mass Loss: 0.26 %
Hardness, Rockwell M: 105

Quadrant EPP Duratron® PAI T5530 PAI, 30% glass fibers, compression moulded (ISO Data) accurate 52%

$ 2246/MT

Density: 1.61 g/cc
Moisture Absorption at Equilibrium: 1.7 %
Water Absorption at Saturation: 3.2 %
Hardness, Rockwell E: 85
Hardness, Shore D: 90

Quadrant EPP Duratron® PAI T4203 PAI, unfilled, extruded (ISO Data) accurate 99%

$ 1672/MT

Density: 1.41 g/cc
Moisture Absorption at Equilibrium: 2.5 %
Water Absorption at Saturation: 4.4 %
Outgassing - Total Mass Loss: 1.9 %
Hardness, Rockwell E: 80

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, cruise ships sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

5 prices for Quadrant EPP Duratron® PAI T4503 PAI, unfilled, compression moulded (ISO Data)

Seller from Taipei – 2021-06-22:

Seller from Taipei work with company: Solvay, Exxon Chemical, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1517 per MT

Seller from Bogotá – 2021-03-12:

Seller from Bogotá work with company: Solvay, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), BASF

Price: $1843 per MT

Seller from Rio de Janeiro – 2021-03-22:

Seller from Rio de Janeiro work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1828 per MT

Seller from Lima – 2021-08-12:

Seller from Lima work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2201 per MT

Seller from Tokyo – 2021-05-13:

Seller from Tokyo work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2302 per MT