Quadrant EPP Duratron® PBI CU60 compression moulded (ISO Data) price 1568 per MT

Physical Properties
Density
1.30 g/cc
Moisture Absorption at Equilibrium
7.5 %
Water Absorption at Saturation
14 %
Outgassing - Total Mass Loss
2.2 %

Mechanical Properties
Hardness, Rockwell E
120
Hardness, Shore D
92
Ball Indentation Hardness
375 MPa
Tensile Strength
130 MPa
Elongation at Break
3.0 %
Tensile Modulus
6.00 GPa
Flexural Strength
160 MPa
Compressive Strength
58.0 MPa @Strain 1 %
Compressive Strength
118 MPa @Strain 2 %
Compressive Strength
280 MPa @Strain 5 %
K Factor (ISO)
3.0 µm/km
Charpy Impact Unnotched
2.00 J/cm²
Charpy Impact, Notched
0.250 J/cm²
Coefficient of Friction, Dynamic
0.30 - 0.50
Limiting Pressure Velocity
1.14 MPa-m/sec
Limiting Pressure Velocity
1.80 MPa-m/sec

Thermal Properties
CTE, linear
25.0 µm/m-°C @Temperature 23.0 - 100 °C
Thermal Conductivity
0.400 W/m-K
Maximum Service Temperature, Air
310 °C
Deflection Temperature at 1.8 MPa (264 psi)
425 °C
Glass Transition Temp, Tg
415 °C
Flammability, UL94
V-0
Oxygen Index
58 %

Electrical Properties
Volume Resistivity
>= 1.0e+14 ohm-cm
Surface Resistivity per Square
>= 1.0e+13 ohm
Dielectric Constant
3.3 @Frequency >=100000 Hz
Dielectric Strength
28.0 kV/mm
Dissipation Factor
0.0010 @Frequency 100000 Hz

Compliance Properties
3A-Dairy
No
European Food 1935/2004
No
FDA
No
USP Class VI
No

Chemical Resistance Properties
Acids, Strong (pH 1-3)
Unacceptable
Acids, Weak
Limited
Alcohols
Acceptable
Alkalies, Strong (pH 11-14)
Unacceptable
Alkalies, Weak
Limited
Chlorinated Solvents
Acceptable
Continuous Sunlight
Limited
Hot Water / Steam
Limited
Hydrocarbons - Aliphatic
Acceptable
Hydrocarbons - Aromatic
Acceptable
Inorganic Salt Solutions
Acceptable
Ketones, Esters
Acceptable

Alternative products

SABIC Innovative Plastics Valox® 855 PBT (Europe-Africa-Middle East) accurate 85%

$ 1444/MT

Specific Gravity: 1.50 g/cc
Density: 1.50 g/cc
Filler Content: 15 %
Moisture Absorption: 0.0600 %
Water Absorption at Saturation: 0.45 %

Celanese CELANEX 3200 PBT, 15% Glass Reinforced accurate 78%

$ 2342/MT

Specific Gravity: 1.41 g/cc
Density: 1.41 g/cc
Moisture Absorption: 0.170 %
Linear Mold Shrinkage, Flow: 0.00100 - 0.00700 cm/cm
Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm

BASF Styrodur® 3035 CN Extruded Rigid Polystyrene Foam (Europe) accurate 78%

$ 1548/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 100 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 4000 CS Extruded Rigid Polystyrene Foam (Europe) accurate 78%

$ 2342/MT

Density: 0.0350 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 80.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 3035 CS Extruded Rigid Polystyrene Foam (Europe) accurate 78%

$ 2271/MT

Density: 0.0330 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 50.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Celanese CELANEX 3200-2FC PBT, 15% Glass Reinforced accurate 78%

$ 2049/MT

Specific Gravity: 1.41 g/cc
Density: 1.41 g/cc
Moisture Absorption: 0.200 %
Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm
Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm

Quadrant EPP Duratron® PAI T5530 PAI, 30% glass fibers, compression moulded (ISO Data) accurate 78%

$ 2246/MT

Density: 1.61 g/cc
Moisture Absorption at Equilibrium: 1.7 %
Water Absorption at Saturation: 3.2 %
Hardness, Rockwell E: 85
Hardness, Shore D: 90

Celanese CELANEX 3200FC PBT, 15% Glass Reinforced accurate 78%

$ 1447/MT

Specific Gravity: 1.41 g/cc
Density: 1.41 g/cc
Moisture Absorption: 0.170 %
Linear Mold Shrinkage, Flow: 0.00100 - 0.00700 cm/cm
Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm

Celanese CELANEX 3200-2 PBT, 15% Glass Reinforced accurate 78%

$ 2001/MT

Specific Gravity: 1.41 g/cc
Density: 1.41 g/cc
Moisture Absorption: 0.200 %
Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm
Linear Mold Shrinkage, Flow: 0.00500 - 0.00700 cm/cm

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ships for sale greece. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

5 prices for Quadrant EPP Duratron® PBI CU60 compression moulded (ISO Data)

Seller from Ahmadābād – 2021-07-26:

Seller from Ahmadābād work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1877 per MT

Seller from Guangzhou – 2021-03-11:

Seller from Guangzhou work with company: Solvay, DSM Engineering Plastics, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics)

Price: $1568 per MT

Seller from Cairo – 2021-07-14:

Seller from Cairo work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co.

Price: $2025 per MT

Seller from Shanghai – 2021-07-25:

Seller from Shanghai work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2164 per MT

Seller from Kinshasa – 2021-05-05:

Seller from Kinshasa work with company: Solvay, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2348 per MT