Quadrant EPP Ertalon® 4.6 PA 4.6, extruded (ISO Data) price 1725 per MT

Physical Properties
Density
1.19 g/cc
Moisture Absorption at Equilibrium
2.8 %
Water Absorption at Saturation
9.5 %

Mechanical Properties
Hardness, Rockwell M
92
Hardness, Shore D
80
Ball Indentation Hardness
165 MPa
Tensile Strength
105 MPa
Elongation at Break
25 %
Elongation at Yield
18 %
Tensile Modulus
3.40 GPa
Flexural Strength
138 MPa
Flexural Modulus
3.23 GPa
Compressive Strength
31.0 MPa @Strain 1 %
Compressive Strength
60.0 MPa @Strain 2 %
Compressive Strength
102 MPa @Strain 5 %
K Factor (ISO)
18 µm/km
Charpy Impact Unnotched
NB
Charpy Impact, Notched
0.800 J/cm²
Coefficient of Friction, Dynamic
0.40 - 0.60
Limiting Pressure Velocity
0.100 MPa-m/sec
Limiting Pressure Velocity
0.160 MPa-m/sec

Thermal Properties
CTE, linear
90.0 µm/m-°C @Temperature 23.0 - 100 °C
Thermal Conductivity
0.300 W/m-K
Melting Point
290 °C
Maximum Service Temperature, Air
130 °C
Maximum Service Temperature, Air
150 °C
Deflection Temperature at 1.8 MPa (264 psi)
160 °C
Flammability, UL94
HB
Oxygen Index
24 %

Electrical Properties
Volume Resistivity
>= 1.0e+14 ohm-cm
Surface Resistivity per Square
>= 1.0e+13 ohm
Dielectric Constant
3.8 @Frequency >=100000 Hz
Dielectric Strength
25.0 kV/mm
Dissipation Factor
0.0090 @Frequency 100000 Hz
Comparative Tracking Index
400 V

Compliance Properties
3A-Dairy
No
European Food 1935/2004
No
FDA
No
USP Class VI
No

Chemical Resistance Properties
Acids, Strong (pH 1-3)
Unacceptable
Acids, Weak
Limited
Alcohols
Limited
Alkalies, Strong (pH 11-14)
Unacceptable
Alkalies, Weak
Limited
Chlorinated Solvents
Limited
Continuous Sunlight
Limited
Hot Water / Steam
Limited
Hydrocarbons - Aliphatic
Acceptable
Hydrocarbons - Aromatic
Acceptable
Inorganic Salt Solutions
Acceptable
Ketones, Esters
Acceptable

Alternative products

BASF Styrodur® 3035 CN Extruded Rigid Polystyrene Foam (Europe) accurate 51%

$ 1548/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 100 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 2800 C Extruded Rigid Polystyrene Foam (Europe) accurate 51%

$ 2010/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 5.0 %
Water Vapor Transmission: 80.0 - 200 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Quadrant EPP Ertalon® 6XAU+ PA 6, heat stabilized, cast (ISO Data) accurate 51%

$ 2292/MT

Density: 1.15 g/cc
Moisture Absorption at Equilibrium: 2.2 %
Water Absorption at Saturation: 6.5 %
Hardness, Rockwell M: 87
Hardness, Shore D: 80

BASF Styrodur® 4000 CS Extruded Rigid Polystyrene Foam (Europe) accurate 51%

$ 2342/MT

Density: 0.0350 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 80.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Quadrant EPP Ertalon® 6 SA PA 6, extruded (ISO Data) accurate 51%

$ 1586/MT

Density: 1.14 g/cc
Moisture Absorption at Equilibrium: 2.6 %
Water Absorption at Saturation: 9.0 %
Outgassing - Total Mass Loss: 1.3 %
Hardness, Rockwell M: 85

BASF Styrodur® 3035 CS Extruded Rigid Polystyrene Foam (Europe) accurate 51%

$ 2271/MT

Density: 0.0330 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 50.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Quadrant EPP Nylatron® GSM PA 6 + MoS2, cast (ISO Data) accurate 51%

$ 1560/MT

Density: 1.16 g/cc
Moisture Absorption at Equilibrium: 2.4 %
Water Absorption at Saturation: 6.7 %
Hardness, Rockwell M: 84
Hardness, Shore D: 80

Quadrant EPP Nylatron® MC901 PA 6, blue, cast (ISO Data) accurate 56%

$ 1924/MT

Density: 1.15 g/cc
Moisture Absorption at Equilibrium: 2.3 %
Water Absorption at Saturation: 6.6 %
Hardness, Rockwell M: 85
Hardness, Shore D: 80

Quadrant EPP Nylatron® NSM PA 6 + internal lubricant, cast (ISO Data) accurate 56%

$ 1482/MT

Density: 1.14 g/cc
Moisture Absorption at Equilibrium: 2.0 %
Water Absorption at Saturation: 6.3 %
Hardness, Rockwell M: 81
Hardness, Shore D: 76

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ships for sale greece. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for Quadrant EPP Ertalon® 4.6 PA 4.6, extruded (ISO Data)

Seller from Madrid – 2021-03-03:

Seller from Madrid work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2570 per MT

Seller from Wuhan – 2021-05-12:

Seller from Wuhan work with company: 3M, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2594 per MT

Seller from Sydney – 2021-06-01:

Seller from Sydney work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1725 per MT

Seller from Dhaka – 2021-04-28:

Seller from Dhaka work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2182 per MT