Quadrant EPP Ertalyte® TX PET + solid lubricant, extruded (ISO Data) price 1469 per MT

Physical Properties
Density
1.44 g/cc
Moisture Absorption at Equilibrium
0.23 %
Water Absorption at Saturation
0.47 %
Outgassing - Total Mass Loss
0.25 %

Mechanical Properties
Hardness, Rockwell M
94
Hardness, Shore D
78
Ball Indentation Hardness
160 MPa
Tensile Strength
76.0 MPa
Elongation at Break
5.0 %
Elongation at Yield
4.0 %
Tensile Modulus
3.30 GPa
Flexural Strength
122 MPa
Flexural Modulus
3.16 GPa
Compressive Strength
31.0 MPa @Strain 1 %
Compressive Strength
60.0 MPa @Strain 2 %
Compressive Strength
102 MPa @Strain 5 %
K Factor (ISO)
2.0 µm/km
Charpy Impact Unnotched
3.00 J/cm²
Charpy Impact, Notched
0.250 J/cm²
Coefficient of Friction, Dynamic
0.15 - 0.22
Limiting Pressure Velocity
0.160 MPa-m/sec
Limiting Pressure Velocity
0.260 MPa-m/sec

Thermal Properties
CTE, linear
85.0 µm/m-°C @Temperature 23.0 - 100 °C
Thermal Conductivity
0.290 W/m-K
Melting Point
245 °C
Maximum Service Temperature, Air
100 °C
Maximum Service Temperature, Air
115 °C
Deflection Temperature at 1.8 MPa (264 psi)
75.0 °C
Flammability, UL94
HB
Oxygen Index
25 %

Electrical Properties
Volume Resistivity
>= 1.0e+14 ohm-cm
Surface Resistivity per Square
>= 1.0e+13 ohm
Dielectric Constant
3.4 @Frequency >=100000 Hz
Dielectric Strength
21.0 kV/mm
Dissipation Factor
0.0010 @Frequency 100000 Hz
Comparative Tracking Index
600 V

Compliance Properties
3A-Dairy
No
European Food 1935/2004
Yes
FDA
Yes
USP Class VI
No

Chemical Resistance Properties
Acids, Strong (pH 1-3)
Unacceptable
Acids, Weak
Limited
Alcohols
Limited
Alkalies, Strong (pH 11-14)
Unacceptable
Alkalies, Weak
Limited
Chlorinated Solvents
Limited
Continuous Sunlight
Limited
Hot Water / Steam
Limited
Hydrocarbons - Aliphatic
Acceptable
Hydrocarbons - Aromatic
Acceptable
Inorganic Salt Solutions
Acceptable
Ketones, Esters
Acceptable

Alternative products

SABIC Innovative Plastics LNP LUBRICOMP DFL22 PC (Asia Pacific) accurate 61%

$ 1962/MT

Density: 1.33 g/cc
Density: 1.34 g/cc
Moisture Absorption: 0.100 %
Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Time 86400 sec

BASF Styrodur® 3035 CN Extruded Rigid Polystyrene Foam (Europe) accurate 51%

$ 1548/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 100 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 4000 CS Extruded Rigid Polystyrene Foam (Europe) accurate 51%

$ 2342/MT

Density: 0.0350 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 80.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Quadrant EPP Ertalon® 6 SA PA 6, extruded (ISO Data) accurate 51%

$ 1586/MT

Density: 1.14 g/cc
Moisture Absorption at Equilibrium: 2.6 %
Water Absorption at Saturation: 9.0 %
Outgassing - Total Mass Loss: 1.3 %
Hardness, Rockwell M: 85

BASF Styrodur® 3035 CS Extruded Rigid Polystyrene Foam (Europe) accurate 51%

$ 2271/MT

Density: 0.0330 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 50.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Quadrant EPP Nylatron® GSM PA 6 + MoS2, cast (ISO Data) accurate 51%

$ 1560/MT

Density: 1.16 g/cc
Moisture Absorption at Equilibrium: 2.4 %
Water Absorption at Saturation: 6.7 %
Hardness, Rockwell M: 84
Hardness, Shore D: 80

DuPont Performance Polymers Zytel® 103FHS NC010 Nylon 66 (Unverified Data**) accurate 61%

$ 1463/MT

Density: 1.01 g/cc
Density: 1.14 g/cc
Water Absorption: 8.5 % @Thickness 2.00 mm
Moisture Absorption: 2.60 % @Thickness 2.00 mm
Viscosity: 42210 cP @Shear Rate 5000 1/s, Temperature 295 °C

Murtfeldt Murylat® SP Polyethylene Terephthalate accurate 61%

$ 1676/MT

Density: 1.44 g/cc
Moisture Absorption at Equilibrium: 0.23 % @Temperature 23.0 °C
Water Absorption at Saturation: 0.47 % @Temperature 23.0 °C
Hardness, Rockwell M: 94
Hardness, Shore D: 81

Quadrant EPP Nylatron® MC901 PA 6, blue, cast (ISO Data) accurate 51%

$ 1924/MT

Density: 1.15 g/cc
Moisture Absorption at Equilibrium: 2.3 %
Water Absorption at Saturation: 6.6 %
Hardness, Rockwell M: 85
Hardness, Shore D: 80

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, dredger ship types. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Quadrant EPP Ertalyte® TX PET + solid lubricant, extruded (ISO Data)

Seller from Singapore – 2021-03-02:

Seller from Singapore work with company: RTP Company, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1469 per MT

Seller from Bengalūru – 2021-04-13:

Seller from Bengalūru work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2544 per MT

Seller from Nanjing – 2021-02-28:

Seller from Nanjing work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2126 per MT