Quadrant EPP Ketron® HPV PEEK High Pressure Velocity Polyetherether Ketone (ASTM Product Data Sheet) price 1569 per MT

Physical Properties
Specific Gravity
1.44 g/cc @Temperature 22.8 °C
Water Absorption
0.050 %
Water Absorption at Saturation
0.30 %

Mechanical Properties
Hardness, Rockwell M
85
Tensile Strength
75.8 MPa @Temperature 22.8 °C
Elongation at Break
2.0 %
Tensile Modulus
5.86 GPa @Temperature 22.8 °C
Flexural Strength
190 MPa @Temperature 22.8 °C
Flexural Modulus
7.58 GPa @Temperature 22.8 °C
Compressive Strength
138 MPa @Strain 10.0 %, Temperature 22.8 °C
Compressive Modulus
3.45 GPa @Temperature 22.8 °C
Shear Strength
68.9 MPa @Temperature 22.8 °C
Izod Impact, Notched
0.374 J/cm
Coefficient of Friction, Dynamic
0.21
K (wear) Factor
201 x 10 mm³/N-M
Limiting Pressure Velocity
0.701 MPa-m/sec

Thermal Properties
CTE, linear
30.6 µm/m-°C @Temperature -40.0 - 149 °C
Thermal Conductivity
0.245 W/m-K
Melting Point
340 °C
Maximum Service Temperature, Air
250 °C
Deflection Temperature at 1.8 MPa (264 psi)
195 °C
Flammability, UL94
V-0

Electrical Properties
Surface Resistivity per Square
<= 10000 ohm

Compliance Properties
3A-Dairy
No
Canada AG
No
FDA
No
NSF
No
USDA
No
USP Class VI
No

Chemical Resistance Properties
Acids, Strong (pH 1-3)
Limited
Acids, Weak
Acceptable
Alcohols
Acceptable
Alkalies, Strong (pH 11-14)
Acceptable
Alkalies, Weak
Acceptable
Chlorinated Solvents
Acceptable
Conductive / Static Dissipative
Yes
Continuous Sunlight
Acceptable
Hot Water / Steam
Acceptable
Hydrocarbons - Aliphatic
Acceptable
Hydrocarbons - Aromatic
Acceptable
Inorganic Salt Solutions
Acceptable
Ketones, Esters
Acceptable

Descriptive Properties
Color
Natural
Machinability
7

Alternative products

SABIC Innovative Plastics Valox® 8032UX PBT+PET (Asia Pacific) accurate 63%

$ 1677/MT

Specific Gravity: 1.60 g/cc
Density: 1.54 g/cc
Moisture Absorption: 0.0700 %
Water Absorption at Saturation: 0.16 %
Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm

Solvay Specialty Polymers AvaSpire® AV-722 SL30 Polyaryletherketone (PAEK) (Unverified Data**) accurate 72%

$ 1792/MT

Specific Gravity: 1.46 g/cc
Water Absorption: 0.030 % @Time 86400 sec
Viscosity: 240000 cP @Shear Rate 1000 1/s, Temperature 400 °C
Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm
Linear Mold Shrinkage, Transverse: 0.017 - 0.019 cm/cm @Thickness 3.18 mm

Solvay Specialty Polymers AvaSpire® AV-650 GF30 Polyaryletherketone (PAEK) (Unverified Data**) accurate 54%

$ 1707/MT

Specific Gravity: 1.55 g/cc
Filler Content: 30 %
Water Absorption: 0.40 %
Water Absorption: 0.20 % @Time 86400 sec
Viscosity: 410000 cP @Shear Rate 1000 1/s, Temperature 400 °C

SABIC Innovative Plastics Valox® 8032UX PBT+PET accurate 63%

$ 1502/MT

Specific Gravity: 1.60 g/cc
Density: 1.54 g/cc
Moisture Absorption: 0.0700 %
Water Absorption at Saturation: 0.16 %
Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm

Celanese FORTRON 1342L4 PPS, 40% Specialty (Unverified Data**) accurate 63%

$ 1491/MT

Specific Gravity: 1.70 g/cc
Density: 1.69 g/cc
Water Absorption: 0.020 %
Water Absorption: 0.020 %
Thickness: 3180 microns

SABIC Innovative Plastics Valox® SHF4930 PBT (Europe-Africa-Middle East) accurate 63%

$ 1674/MT

Specific Gravity: 1.54 g/cc
Density: 1.54 g/cc
Filler Content: 15 %
Moisture Absorption: 0.0700 %
Water Absorption at Saturation: 0.23 %

SABIC Innovative Plastics Valox® 8032U PBT+PET (Europe-Africa-Middle East) accurate 63%

$ 1689/MT

Specific Gravity: 1.58 g/cc
Density: 1.53 g/cc
Moisture Absorption: 0.0500 %
Water Absorption at Saturation: 0.16 %
Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm

Solvay Specialty Polymers KetaSpire® KT-820 SL30 Polyetheretherketone (PEEK) (Unverified Data**) accurate 63%

$ 2187/MT

Specific Gravity: 1.45 g/cc
Water Absorption: 0.14 % @Time 86400 sec
Viscosity: 270000 cP @Shear Rate 1000 1/s, Temperature 400 °C
Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm
Linear Mold Shrinkage, Transverse: 0.015 - 0.017 cm/cm @Thickness 3.18 mm

Solvay Specialty Polymers KetaSpire® KT-820 SL45 Polyetheretherketone (PEEK) (Unverified Data**) accurate 63%

$ 2447/MT

Specific Gravity: 1.50 g/cc
Water Absorption: 0.030 % @Time 86400 sec
Viscosity: 380000 cP @Shear Rate 1000 1/s, Temperature 400 °C
Linear Mold Shrinkage, Flow: 0.00 - 0.0020 cm/cm @Thickness 3.18 mm
Linear Mold Shrinkage, Transverse: 0.013 - 0.015 cm/cm @Thickness 3.18 mm

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, bulkers for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Quadrant EPP Ketron® HPV PEEK High Pressure Velocity Polyetherether Ketone (ASTM Product Data Sheet)

Seller from Hāora – 2021-07-17:

Seller from Hāora work with company: Solvay, SABIC Innovative Plastics (GE Plastics), LG Chemical, ALIMEX GmbH

Price: $2423 per MT

Seller from Alexandria – 2021-03-19:

Seller from Alexandria work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1569 per MT

Seller from Dallas – 2021-07-01:

Seller from Dallas work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1975 per MT