Quadrant EPP PE 500 PE-HMW, virgin (ISO Data) price 1719 per MT

Physical Properties
Density
0.960 g/cc
Water Absorption
<= 0.10 %
Moisture Absorption at Equilibrium
<= 0.10 %
Water Absorption at Saturation
<= 0.10 %
Outgassing - Total Mass Loss
0.14 %

Mechanical Properties
Hardness, Shore D
62
Ball Indentation Hardness
48.0 MPa
Tensile Strength
28.0 MPa
Elongation at Break
>= 50 %
Elongation at Yield
10 %
Tensile Modulus
1.30 GPa
Flexural Strength
27.0 MPa
Compressive Strength
12.0 MPa @Strain 1 %
Compressive Strength
18.5 MPa @Strain 2 %
Compressive Strength
26.5 MPa @Strain 5 %
K Factor (ISO)
300 µm/km
Charpy Impact Unnotched
NB
Charpy Impact, Notched
10.5 J/cm²
Coefficient of Friction, Dynamic
0.15 - 0.30
Sand Slurry
350
Limiting Pressure Velocity
0.0500 MPa-m/sec
Limiting Pressure Velocity
0.0800 MPa-m/sec

Thermal Properties
CTE, linear
150 µm/m-°C @Temperature 23.0 - 100 °C
Thermal Conductivity
0.400 W/m-K
Melting Point
135 °C
Maximum Service Temperature, Air
80.0 °C
Deflection Temperature at 1.8 MPa (264 psi)
44.0 °C
Flammability, UL94
HB
Oxygen Index
<= 20 %

Electrical Properties
Volume Resistivity
>= 1.0e+14 ohm-cm
Surface Resistivity per Square
>= 1.0e+12 ohm
Dielectric Strength
45.0 kV/mm
Dissipation Factor
0.00020 @Frequency 100000 Hz
Comparative Tracking Index
600 V

Compliance Properties
3A-Dairy
No
European Food 1935/2004
Yes
FDA
Yes
USP Class VI
No

Chemical Resistance Properties
Acids, Strong (pH 1-3)
Acceptable
Acids, Weak
Acceptable
Alcohols
Acceptable
Alkalies, Strong (pH 11-14)
Acceptable
Alkalies, Weak
Acceptable
Chlorinated Solvents
Acceptable
Continuous Sunlight
Limited
Hot Water / Steam
Unacceptable
Hydrocarbons - Aliphatic
Acceptable
Hydrocarbons - Aromatic
Limited
Inorganic Salt Solutions
Acceptable
Ketones, Esters
Acceptable

Alternative products

Quadrant EPP TIVAR® Ceram P PE-UHMW + micro glass beads + other additives (ISO Data) accurate 67%

$ 2289/MT

Density: 0.960 g/cc
Water Absorption: <= 0.10 %
Moisture Absorption at Equilibrium: <= 0.10 %
Water Absorption at Saturation: <= 0.10 %
Outgassing - Total Mass Loss: 0.14 %

Quadrant EPP TIVAR® 1000 PE-UHMW, virgin (ISO Data) accurate 78%

$ 2439/MT

Density: 0.930 g/cc
Water Absorption: <= 0.10 %
Moisture Absorption at Equilibrium: <= 0.10 %
Water Absorption at Saturation: <= 0.10 %
Outgassing - Total Mass Loss: 0.14 %

Quadrant EPP TIVAR® MD PE-UHMW + metal detectable additive (ISO Data) accurate 67%

$ 1809/MT

Density: 0.995 g/cc
Water Absorption: <= 0.10 %
Moisture Absorption at Equilibrium: <= 0.10 %
Water Absorption at Saturation: <= 0.10 %
Outgassing - Total Mass Loss: 0.14 %

BASF Styrodur® 3035 CN Extruded Rigid Polystyrene Foam (Europe) accurate 67%

$ 1548/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 100 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 2800 C Extruded Rigid Polystyrene Foam (Europe) accurate 67%

$ 2010/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 5.0 %
Water Vapor Transmission: 80.0 - 200 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Quadrant EPP TIVAR® TECH PE-UHMW + MoS2 (ISO Data) accurate 67%

$ 2082/MT

Density: 0.935 g/cc
Water Absorption: <= 0.10 %
Moisture Absorption at Equilibrium: <= 0.10 %
Water Absorption at Saturation: <= 0.10 %
Outgassing - Total Mass Loss: 0.14 %

BASF Styrodur® 4000 CS Extruded Rigid Polystyrene Foam (Europe) accurate 67%

$ 2342/MT

Density: 0.0350 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 80.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Quadrant EPP TIVAR® DS PE-UHMW + additives (ISO Data) accurate 78%

$ 2584/MT

Density: 0.930 g/cc
Water Absorption: <= 0.10 %
Moisture Absorption at Equilibrium: <= 0.10 %
Water Absorption at Saturation: <= 0.10 %
Outgassing - Total Mass Loss: 0.14 %

BASF Styrodur® 3035 CS Extruded Rigid Polystyrene Foam (Europe) accurate 67%

$ 2271/MT

Density: 0.0330 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 50.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, decommissioned ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Quadrant EPP PE 500 PE-HMW, virgin (ISO Data)

Seller from Ahmadābād – 2021-05-23:

Seller from Ahmadābād work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1719 per MT

Seller from Cairo – 2021-06-04:

Seller from Cairo work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2356 per MT

Seller from Hāora – 2021-03-22:

Seller from Hāora work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2498 per MT