Quadrant EPP Semitron® CMP XL20 (ASTM Product Data Sheet) price 1484 per MT

Physical Properties
Specific Gravity
1.40 g/cc
Water Absorption
0.40 %
Water Absorption at Saturation
1.7 %
Outgassing - Total Mass Loss
1.85 %
Collected Volatile Condensable Material
0.00 %

Mechanical Properties
Hardness, Rockwell E
80
Hardness, Rockwell M
120
Tensile Strength
138 MPa
Elongation at Break
10 %
Tensile Modulus
3.96 GPa
Flexural Strength
165 MPa
Flexural Modulus
4.14 GPa
Compressive Strength
165 MPa
Compressive Modulus
2.76 GPa
Shear Strength
110 MPa
Izod Impact, Notched
1.1 J/cm
Coefficient of Friction, Dynamic
0.35
K (wear) Factor
>= 2010 x 10 mm³/N-M
Limiting Pressure Velocity
0.140 MPa-m/sec

Thermal Properties
CTE, linear
30.6 µm/m-°C @Temperature -40.0 - 150 °C
Thermal Conductivity
0.259 W/m-K
Maximum Service Temperature, Air
260 °C
Deflection Temperature at 1.8 MPa (264 psi)
278 °C
Glass Transition Temp, Tg
275 °C
Flammability, UL94
V-0 @Thickness 3.17 mm

Electrical Properties
Surface Resistivity per Square
>= 1.00e+16 ohm
Dielectric Constant
4.2 @Frequency 1e+6 Hz
Dielectric Strength
23 kV/mm
Dissipation Factor
0.026 @Frequency 1e+6 Hz

Compliance Properties
3A-Dairy
No
Canada AG
No
FDA
No
NSF
No
USDA
No
USP Class VI
No

Chemical Properties
Ionic Impurities - Na (Sodium)
3.9 ppm
Ionic Impurities - K (Potassium)
0.50 ppm
Ionic Impurities - Fe (Iron)
1.5 ppm

Chemical Resistance Properties
Acids, Strong (pH 1-3)
Limited
Acids, Weak
Acceptable
Alcohols
Acceptable
Alkalies, Strong (pH 11-14)
Unacceptable
Alkalies, Weak
Limited
Chlorinated Solvents
Acceptable
Conductive / Static Dissipative
No
Continuous Sunlight
Limited
Hot Water / Steam
Limited
Hydrocarbons - Aliphatic
Acceptable
Hydrocarbons - Aromatic
Acceptable
Inorganic Salt Solutions
Acceptable
Ketones, Esters
Acceptable

Alternative products

PBI Performance Products Celazole® PBI U-60 Unfilled Polybenzimidazole Resin accurate 66%

$ 1448/MT

Specific Gravity: 1.30 g/cc
Water Absorption: 0.40 % @Temperature 22.8 °C, Time 86400 sec
Hardness, Rockwell E: 104
Hardness, Rockwell M: >= 125
Hardness, Shore D: 95

ChevronTexaco Texatherm® accurate 74%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 2128 QSI Quantum Silicones 28 Durometer Condensation Cure Moldmaking Material accurate 66%

$ 1508/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc

Quadrant EPP Duratron® PAI T4203 Extruded Polyamide-imide (ASTM Product Data Sheet) accurate 99%

$ 1498/MT

Specific Gravity: 1.41 g/cc
Water Absorption: 0.40 %
Water Absorption at Saturation: 1.7 %
Hardness, Rockwell E: 80
Hardness, Rockwell M: 120

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 66%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

Celanese FORTRON 214 PPS (Unverified Data**) accurate 74%

$ 2311/MT

Specific Gravity: 1.35 g/cc
Specific Gravity: 1.36 g/cc
Density: 1.35 g/cc
Density: 1.35 g/cc
Density of Compound: 1.15 g/cc

ChevronTexaco 22 Heat Transfer Oil accurate 66%

$ 2024/MT

Specific Gravity: 0.6083 g/cc
Specific Gravity: 0.655 g/cc
Specific Gravity: 0.6916 g/cc
Specific Gravity: 0.729 g/cc
Specific Gravity: 0.7658 g/cc

ACC QM 107 QSI Quantum Silicones 7 Durometer Condensation Cure Moldmaking Material accurate 57%

$ 1982/MT

Specific Gravity: 0.950 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.20 g/cc
Specific Gravity: 1.20 g/cc

SABIC Innovative Plastics Valox® K4530 PBT (Europe-Africa-Middle East) accurate 66%

$ 1587/MT

Specific Gravity: 1.41 g/cc
Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.20 mm
Melt Index of Compound: 17 g/10 min @Load 2.16 kg, Temperature 250 °C
Tensile Strength at Break: 82.0 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, passenger boat for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Quadrant EPP Semitron® CMP XL20 (ASTM Product Data Sheet)

Seller from Buenos Aires – 2021-06-05:

Seller from Buenos Aires work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1611 per MT

Seller from Kolkata – 2021-04-16:

Seller from Kolkata work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1484 per MT

Seller from Philadelphia – 2021-08-13:

Seller from Philadelphia work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2048 per MT