SABIC Innovative Plastics Cycolac® FR15U ABS (Asia Pacific) price 1477 per MT

Physical Properties
Specific Gravity
1.19 g/cc
Density
1.19 g/cc
Viscosity
320000 cP
Linear Mold Shrinkage, Flow
0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow
3.3 g/10 min @Load 3.80 kg, Temperature 230 °C
Melt Flow
7.0 g/10 min @Load 5.00 kg, Temperature 220 °C
Melt Index of Compound
40 g/10 min @Load 10.0 kg, Temperature 220 °C

Mechanical Properties
Tensile Strength at Break
30.0 MPa
Tensile Strength, Yield
37.0 MPa
Tensile Strength, Yield
41.0 MPa
Elongation at Break
17 %
Elongation at Break
21.9 %
Elongation at Yield
2.4 %
Tensile Modulus
2.06 GPa
Tensile Modulus
2.21 GPa
Flexural Yield Strength
63.0 MPa
Flexural Yield Strength
67.0 MPa
Flexural Modulus
2.26 GPa
Flexural Modulus
2.34 GPa
Izod Impact, Notched
2.13 J/cm
Izod Impact, Notched (ISO)
12.0 kJ/m²
Dart Drop, Total Energy
28.0 J @Temperature 23.0 °C

Thermal Properties
CTE, linear, Parallel to Flow
90.0 µm/m-°C @Temperature -40.0 - 40.0 °C
CTE, linear, Transverse to Flow
91.8 µm/m-°C @Temperature -40.0 - 40.0 °C
Deflection Temperature at 0.46 MPa (66 psi)
86.0 °C @Thickness 3.20 mm
Deflection Temperature at 1.8 MPa (264 psi)
75.0 °C @Thickness 3.20 mm
Vicat Softening Point
92.0 °C
Vicat Softening Point
93.0 °C
UL RTI, Electrical
60.0 °C
UL RTI, Mechanical with Impact
60.0 °C
UL RTI, Mechanical without Impact
60.0 °C
Flammability, UL94
V-0 @Thickness 1.49 mm
Flammability, UL94
5VA @Thickness 2.79 mm

Electrical Properties
Volume Resistivity
>= 1.00e+14 ohm-cm
Dielectric Strength
20.0 kV/mm @Thickness 3.20 mm
Arc Resistance
0.00 - 60 sec
Comparative Tracking Index
400 - 600 V
Hot Wire Ignition, HWI
30 - 60 sec
High Amp Arc Ignition, HAI
0.00 - 15 arcs
High Voltage Arc-Tracking Rate, HVTR
>= 150 mm/min

Alternative products

SABIC Innovative Plastics GELOY FXW710SK ASA accurate 66%

$ 1578/MT

Specific Gravity: 1.06 g/cc
Density: 1.09 g/cc
Moisture Absorption: 0.200 %
Water Absorption at Saturation: 0.55 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics Cycoloy® C6840 PC+ABS (Asia Pacific) accurate 66%

$ 1517/MT

Specific Gravity: 1.18 g/cc
Density: 1.19 g/cc
Moisture Absorption: 0.100 %
Water Absorption at Saturation: 0.20 %
Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics Cycolac® MG8000SR ABS (Europe-Africa-Middle East) accurate 70%

$ 1515/MT

Specific Gravity: 1.06 g/cc
Density: 1.07 g/cc
Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 25 g/10 min @Load 10.0 kg, Temperature 220 °C
Melt Flow: 25 g/10 min @Load 10.0 kg, Temperature 220 °C

SABIC Innovative Plastics Cycoloy® C6840 PC+ABS accurate 66%

$ 1844/MT

Specific Gravity: 1.18 g/cc
Density: 1.19 g/cc
Moisture Absorption: 0.100 %
Water Absorption at Saturation: 0.20 %
Linear Mold Shrinkage, Flow: 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics Cycolac® EX58F ABS (Europe-Africa-Middle East) accurate 78%

$ 1874/MT

Specific Gravity: 1.03 g/cc
Density: 1.03 g/cc
Viscosity: 1.55e+6 cP
Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
Melt Flow: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C

SABIC Innovative Plastics Cycolac® MG8000SR ABS accurate 70%

$ 1499/MT

Specific Gravity: 1.06 g/cc
Density: 1.07 g/cc
Linear Mold Shrinkage, Flow: 0.0040 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 25 g/10 min @Load 10.0 kg, Temperature 220 °C
Melt Flow: 25 g/10 min @Load 10.0 kg, Temperature 220 °C

SABIC Innovative Plastics Cycolac® FR15U ABS accurate 82%

$ 1826/MT

Specific Gravity: 1.19 g/cc
Density: 1.19 g/cc
Viscosity: 320000 cP
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 3.3 g/10 min @Load 3.80 kg, Temperature 230 °C

SABIC Innovative Plastics Cycolac® EX58 ABS (Europe-Africa-Middle East) accurate 78%

$ 1600/MT

Specific Gravity: 1.03 g/cc
Density: 1.03 g/cc
Viscosity: 1.55e+6 cP
Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
Melt Flow: 4.0 g/10 min @Load 10.0 kg, Temperature 220 °C

SABIC Innovative Plastics Cycolac® MG38 ABS (Europe-Africa-Middle East) accurate 70%

$ 2533/MT

Specific Gravity: 1.05 g/cc
Density: 1.04 g/cc
Viscosity: 245000 cP
Linear Mold Shrinkage, Flow: 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm
Melt Flow: 3.7 g/10 min @Load 3.80 kg, Temperature 230 °C

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, oil/chemical tanker for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for SABIC Innovative Plastics Cycolac® FR15U ABS (Asia Pacific)

Seller from Delhi – 2021-03-04:

Seller from Delhi work with company: Solvay, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co., ALIMEX GmbH

Price: $1760 per MT

Seller from Porto Alegre – 2021-05-20:

Seller from Porto Alegre work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1477 per MT

Seller from Dhaka – 2021-07-15:

Seller from Dhaka work with company: RTP Company, PolyOne Corporation, Parker Chomerics, SABIC Innovative Plastics (GE Plastics)

Price: $2497 per MT

Seller from Philadelphia – 2021-08-16:

Seller from Philadelphia work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2212 per MT