SABIC Innovative Plastics Cycoloy® C4220K PC+ABS (Asia Pacific) price 1858 per MT

Physical Properties
Density
1.30 g/cc
Moisture Absorption at Equilibrium
0.12 %
Water Absorption at Saturation
0.60 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow
0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
Melt Flow
11 g/10 min @Load 5.00 kg, Temperature 260 °C
Melt Flow
12 g/10 min @Load 5.00 kg, Temperature 260 °C

Mechanical Properties
Hardness, Rockwell L
96
Hardness, Rockwell R
119
Tensile Strength at Break
95.0 MPa
Tensile Strength, Yield
95.0 MPa
Elongation at Break
2.5 %
Elongation at Yield
2.5 %
Tensile Modulus
6.00 GPa
Flexural Yield Strength
125 MPa
Flexural Modulus
5.40 GPa
Izod Impact, Notched
1.00 J/cm @Temperature 23.0 °C
Izod Impact, Unnotched
5.50 J/cm @Temperature 23.0 °C
Izod Impact, Notched (ISO)
10.0 kJ/m² @Temperature 23.0 °C
Izod Impact, Unnotched (ISO)
25.0 kJ/m² @Temperature 23.0 °C
Charpy Impact Unnotched
2.50 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
1.00 J/cm² @Temperature 23.0 °C

Thermal Properties
CTE, linear, Parallel to Flow
26.2 µm/m-°C @Temperature -40.0 - 40.0 °C
CTE, linear, Transverse to Flow
81.6 µm/m-°C @Temperature -40.0 - 40.0 °C
Thermal Conductivity
0.200 W/m-K
Deflection Temperature at 0.46 MPa (66 psi)
135 °C
Deflection Temperature at 0.46 MPa (66 psi)
138 °C @Thickness 3.20 mm
Deflection Temperature at 1.8 MPa (264 psi)
129 °C
Deflection Temperature at 1.8 MPa (264 psi)
130 °C @Thickness 3.20 mm
Vicat Softening Point
135 °C
Vicat Softening Point
137 °C

Electrical Properties
Volume Resistivity
3.50e+16 ohm-cm
Surface Resistance
3.50e+16 ohm
Dielectric Constant
3.3 @Frequency 1.00e+6 Hz
Dielectric Constant
3.4 @Frequency 1000 Hz
Dielectric Strength
30.0 kV/mm @Thickness 1.60 mm
Dielectric Strength
40.0 kV/mm @Thickness 0.800 mm
Dissipation Factor
0.0080 @Frequency 1000 Hz
Dissipation Factor
0.011 @Frequency 1.00e+6 Hz

Descriptive Properties
Ball Pressure Test, 125°C +/- 2°C
pass

Alternative products

SABIC Innovative Plastics Valox® V8030CS PBT+PET accurate 56%

$ 1783/MT

Density: 1.43 g/cc
Density: 1.43 g/cc
Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 265 °C
Melt Index of Compound: 42 g/10 min @Load 5.00 kg, Temperature 265 °C
Tensile Strength at Break: 92.0 MPa

SABIC Innovative Plastics Valox® V9235 PET (Europe-Africa-Middle East) accurate 56%

$ 1507/MT

Density: 1.46 g/cc
Moisture Absorption at Equilibrium: 0.13 %
Water Absorption at Saturation: 0.36 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.0032 - 0.0040 cm/cm
Melt Flow: 38 g/10 min @Load 5.00 kg, Temperature 265 °C

SABIC Innovative Plastics Cycoloy® C4220 PC+ABS (Europe-Africa-Middle East) accurate 66%

$ 1763/MT

Density: 1.30 g/cc
Moisture Absorption at Equilibrium: 0.20 %
Water Absorption at Saturation: 0.60 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm
Melt Flow: 12 g/10 min @Load 5.00 kg, Temperature 260 °C

SABIC Innovative Plastics Noryl GFN1420V PPE+PS (Europe-Africa-Middle East) accurate 61%

$ 2032/MT

Specific Gravity: 1.24 g/cc
Density: 1.24 g/cc
Moisture Absorption at Equilibrium: 0.060 %
Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics LNP Faradex EX06464 PEI (Asia Pacific) accurate 61%

$ 1957/MT

Specific Gravity: 1.50 g/cc
Density: 1.46 g/cc
Density: 1.46 g/cc
Linear Mold Shrinkage, Flow: 0.0055 cm/cm
Linear Mold Shrinkage, Flow: 0.0055 cm/cm @Time 86400 sec

SABIC Innovative Plastics Noryl GFN1420V PPE+PS (Asia Pacific) accurate 61%

$ 2268/MT

Specific Gravity: 1.24 g/cc
Density: 1.24 g/cc
Moisture Absorption at Equilibrium: 0.060 %
Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics LNP LUBRICOMP DCP32 PC (Asia Pacific) accurate 56%

$ 1599/MT

Density: 1.30 g/cc
Density: 1.30 g/cc
Moisture Absorption: 0.100 %
Linear Mold Shrinkage, Flow: 0.0030 - 0.0050 cm/cm @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0043 cm/cm @Time 86400 sec

SABIC Innovative Plastics Noryl GFN1420V PPE+PS accurate 61%

$ 2062/MT

Specific Gravity: 1.24 g/cc
Density: 1.24 g/cc
Moisture Absorption at Equilibrium: 0.060 %
Water Absorption at Saturation: 0.20 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm

SABIC Innovative Plastics LNP LUBRICOMP RX03643H PA 66 (Asia Pacific) accurate 56%

$ 2573/MT

Density: 1.24 g/cc
Density: 1.25 g/cc
Moisture Absorption: 0.900 %
Linear Mold Shrinkage, Flow: 0.010 - 0.012 cm/cm @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.011 cm/cm @Time 86400 sec

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, chemical carrier for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for SABIC Innovative Plastics Cycoloy® C4220K PC+ABS (Asia Pacific)

Seller from Manila – 2021-07-09:

Seller from Manila work with company: Solvay, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co., ALIMEX GmbH

Price: $1858 per MT

Seller from Rangoon – 2021-08-14:

Seller from Rangoon work with company: Solvay, RTP Company, Exxon Chemical, SABIC Innovative Plastics (GE Plastics)

Price: $2325 per MT

Seller from Dhaka – 2021-05-08:

Seller from Dhaka work with company: RTP Company, PolyOne Corporation, Parker Chomerics, SABIC Innovative Plastics (GE Plastics)

Price: $2256 per MT