SABIC Innovative Plastics LNP STAT-KON Ultem_UC1200 PEI (Europe-Africa-Middle East) price 1742 per MT

Physical Properties
Specific Gravity
1.32 g/cc
Linear Mold Shrinkage, Flow
0.0012 - 0.0022 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse
0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
Melt Flow
7.5 g/10 min @Load 6.60 kg, Temperature 337 °C

Mechanical Properties
Tensile Strength at Break
131 MPa
Tensile Strength, Yield
131 MPa
Elongation at Break
5.1 %
Elongation at Yield
5.1 %
Tensile Modulus
8.13 GPa
Flexural Strength
193 MPa
Flexural Strength
221 MPa
Flexural Modulus
7.83 GPa
Flexural Modulus
8.27 GPa
Izod Impact, Notched
0.370 J/cm
Izod Impact, Unnotched
4.16 J/cm
Dart Drop, Total Energy
6.00 J @Temperature 23.0 °C

Thermal Properties
CTE, linear, Parallel to Flow
14.4 µm/m-°C @Temperature -40.0 - 40.0 °C
CTE, linear, Parallel to Flow
14.4 µm/m-°C @Temperature -20.0 - 150 °C
CTE, linear, Transverse to Flow
32.4 µm/m-°C @Temperature -40.0 - 40.0 °C
CTE, linear, Transverse to Flow
39.6 µm/m-°C @Temperature -20.0 - 150 °C
Deflection Temperature at 0.46 MPa (66 psi)
213 °C @Thickness 3.20 mm
Deflection Temperature at 1.8 MPa (264 psi)
208 °C @Thickness 3.20 mm
Deflection Temperature at 1.8 MPa (264 psi)
210 °C @Thickness 6.40 mm
Vicat Softening Point
214 °C
UL RTI, Electrical
105 °C
UL RTI, Mechanical with Impact
105 °C
UL RTI, Mechanical without Impact
105 °C
Flammability, UL94
V-0 @Thickness 1.57 mm

Electrical Properties
Volume Resistivity
400 ohm-cm
Surface Resistance
200000 ohm
Static Decay
0.010 sec
Hot Wire Ignition, HWI
30 - 60 sec
High Amp Arc Ignition, HAI
30 - 60 arcs

Alternative products

SABIC Innovative Plastics ULTEM UC1200 PEI (Asia Pacific) accurate 99%

$ 1601/MT

Specific Gravity: 1.32 g/cc
Linear Mold Shrinkage, Flow: 0.0012 - 0.0022 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
Melt Flow: 7.5 g/10 min @Load 6.60 kg, Temperature 337 °C
Tensile Strength at Break: 131 MPa

SABIC Innovative Plastics ULTEM CRS5301 PEI accurate 59%

$ 2099/MT

Specific Gravity: 1.51 g/cc
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
Melt Flow: 1.8 g/10 min @Load 6.60 kg, Temperature 337 °C
Tensile Strength at Break: 165 MPa
Elongation at Break: 3.0 %

SABIC Innovative Plastics ULTEM 2110EPR PEI (Asia Pacific) accurate 59%

$ 1629/MT

Specific Gravity: 1.35 g/cc
Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
Melt Flow: 19 g/10 min @Load 6.60 kg, Temperature 337 °C
Tensile Strength at Break: 119 MPa

SABIC Innovative Plastics ULTEM 2110EPR PEI accurate 52%

$ 2366/MT

Specific Gravity: 1.35 g/cc
Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.0060 - 0.0080 cm/cm @Thickness 3.20 mm
Melt Flow: 19 g/10 min @Load 6.60 kg, Temperature 337 °C
Tensile Strength at Break: 119 MPa

ChevronTexaco Texatherm® accurate 59%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

SABIC Innovative Plastics ULTEM CRS5301 PEI (Asia Pacific) accurate 59%

$ 1628/MT

Specific Gravity: 1.51 g/cc
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
Melt Flow: 1.8 g/10 min @Load 6.60 kg, Temperature 337 °C
Tensile Strength at Break: 165 MPa
Elongation at Break: 3.0 %

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 52%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

SABIC Innovative Plastics ULTEM CRS5201 PEI accurate 52%

$ 1607/MT

Specific Gravity: 1.42 g/cc
Melt Flow: 2.3 g/10 min @Load 6.60 kg, Temperature 337 °C
Tensile Strength at Break: 131 MPa
Elongation at Break: 5.0 %
Tensile Modulus: 6.89 GPa

SABIC Innovative Plastics LNP STAT-KON Ultem_UC1200 PEI accurate 99%

$ 2002/MT

Specific Gravity: 1.32 g/cc
Linear Mold Shrinkage, Flow: 0.0012 - 0.0022 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.0030 - 0.0050 cm/cm @Thickness 3.20 mm
Melt Flow: 7.5 g/10 min @Load 6.60 kg, Temperature 337 °C
Tensile Strength at Break: 131 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, oil tankers for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: a.kutuzov@plastic-price.com

Work with plastics from August, 2015

5 prices for SABIC Innovative Plastics LNP STAT-KON Ultem_UC1200 PEI (Europe-Africa-Middle East)

Seller from Melbourne – 2021-03-14:

Seller from Melbourne work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2022 per MT

Seller from Phoenix – 2021-06-02:

Seller from Phoenix work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2058 per MT

Seller from Seoul – 2021-07-08:

Seller from Seoul work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2350 per MT

Seller from Chennai – 2021-04-04:

Seller from Chennai work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1742 per MT

Seller from Rangoon – 2021-07-06:

Seller from Rangoon work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1961 per MT