SABIC Innovative Plastics ULTEM 1010 PEI (Asia Pacific) price 1497 per MT

Physical Properties
Specific Gravity
1.27 g/cc
Water Absorption
0.25 % @Time 86400 sec
Moisture Absorption at Equilibrium
1.25 %
Linear Mold Shrinkage, Flow
0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow
17.8 g/10 min @Load 6.60 kg, Temperature 337 °C

Mechanical Properties
Hardness, Rockwell M
109
Tensile Strength, Yield
110 MPa
Elongation at Break
60 %
Elongation at Yield
7.0 %
Tensile Modulus
3.58 GPa
Flexural Yield Strength
165 MPa
Flexural Modulus
3.51 GPa
Izod Impact, Notched
0.320 J/cm
Izod Impact, Notched
11.74 J/cm @Thickness 3.20 mm
Izod Impact, Unnotched
13.35 J/cm
Gardner Impact
33.0 J
Taber Abrasion, mg/1000 Cycles
10

Thermal Properties
CTE, linear, Parallel to Flow
55.8 µm/m-°C @Temperature -20.0 - 150 °C
Thermal Conductivity
0.220 W/m-K
Deflection Temperature at 0.46 MPa (66 psi)
207 °C @Thickness 6.40 mm
Deflection Temperature at 1.8 MPa (264 psi)
198 °C @Thickness 6.40 mm
Vicat Softening Point
218 °C
Glass Transition Temp, Tg
217 °C
UL RTI, Electrical
170 °C
UL RTI, Mechanical with Impact
170 °C
UL RTI, Mechanical without Impact
170 °C
Flammability, UL94
V-0 @Thickness 0.750 mm
Flammability, UL94
5VA @Thickness 3.00 mm
Oxygen Index
44 %

Optical Properties
Transmission, Visible
90 %

Electrical Properties
Volume Resistivity
1.00e+17 ohm-cm
Dielectric Constant
3.15 @Frequency 1000 Hz
Dielectric Strength
28.0 kV/mm @Thickness 1.60 mm
Dielectric Strength
32.7 kV/mm @Thickness 1.60 mm
Dissipation Factor
0.0013 @Frequency 1000 Hz
Dissipation Factor
0.0025 @Frequency 2.45e+9 Hz
Arc Resistance
120 - 180 sec
Comparative Tracking Index
100 - 175 V
Hot Wire Ignition, HWI
60 - 120 sec
High Amp Arc Ignition, HAI
15 - 30 arcs
High Voltage Arc-Tracking Rate, HVTR
25.4 - 80.0 mm/min

Descriptive Properties
NBS Smoke Density, Flaming, Ds 4 min
2

Alternative products

SABIC Innovative Plastics ULTEM 1010F PEI (Asia Pacific) accurate 90%

$ 1530/MT

Specific Gravity: 1.27 g/cc
Water Absorption: 0.25 % @Time 86400 sec
Moisture Absorption at Equilibrium: 1.25 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C

SABIC Innovative Plastics ULTEM 1000F PEI (Asia Pacific) accurate 87%

$ 1476/MT

Specific Gravity: 1.27 g/cc
Water Absorption: 0.25 % @Time 86400 sec
Moisture Absorption at Equilibrium: 1.25 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C

SABIC Innovative Plastics ULTEM 1010F PEI accurate 90%

$ 1776/MT

Specific Gravity: 1.27 g/cc
Water Absorption: 0.25 % @Time 86400 sec
Moisture Absorption at Equilibrium: 1.25 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C

SABIC Innovative Plastics ULTEM 1010 PEI accurate 90%

$ 1626/MT

Specific Gravity: 1.27 g/cc
Water Absorption: 0.25 % @Time 86400 sec
Moisture Absorption at Equilibrium: 1.25 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C

SABIC Innovative Plastics ULTEM 1000 PEI (Asia Pacific) accurate 87%

$ 1588/MT

Specific Gravity: 1.27 g/cc
Water Absorption: 0.25 % @Time 86400 sec
Moisture Absorption at Equilibrium: 1.25 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C

SABIC Innovative Plastics ULTEM 1000F PEI accurate 87%

$ 2064/MT

Specific Gravity: 1.27 g/cc
Water Absorption: 0.25 % @Time 86400 sec
Moisture Absorption at Equilibrium: 1.25 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 9.0 g/10 min @Load 6.60 kg, Temperature 337 °C

SABIC Innovative Plastics ULTEM 1010TC PEI (Asia Pacific) accurate 96%

$ 1464/MT

Specific Gravity: 1.27 g/cc
Density: 1.27 g/cc
Water Absorption: 0.25 % @Time 86400 sec
Moisture Absorption: 0.700 %
Moisture Absorption at Equilibrium: 1.25 %

SABIC Innovative Plastics ULTEM 1010R PEI (Asia Pacific) accurate 87%

$ 2159/MT

Specific Gravity: 1.27 g/cc
Water Absorption: 0.25 % @Time 86400 sec
Moisture Absorption at Equilibrium: 1.25 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 17.8 g/10 min @Load 6.60 kg, Temperature 337 °C

SABIC Innovative Plastics ULTEM HU1010 PEI accurate 99%

$ 2066/MT

Specific Gravity: 1.27 g/cc
Density: 1.27 g/cc
Moisture Absorption: 0.700 %
Moisture Absorption at Equilibrium: 1.25 %
Water Absorption at Saturation: 1.25 %

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lpg carrier for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

6 prices for SABIC Innovative Plastics ULTEM 1010 PEI (Asia Pacific)

Seller from Lahore – 2021-03-01:

Seller from Lahore work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1557 per MT

Seller from Lima – 2021-07-19:

Seller from Lima work with company: DuPont Performance Polymers, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2214 per MT

Seller from Nanjing – 2021-05-08:

Seller from Nanjing work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2545 per MT

Seller from Xi’an – 2021-06-15:

Seller from Xi’an work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1962 per MT

Seller from Madrid – 2021-04-20:

Seller from Madrid work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1502 per MT

Seller from Santiago – 2021-05-07:

Seller from Santiago work with company: Solvay, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $1497 per MT