SABIC Innovative Plastics Valox® 745 PBT (Asia Pacific) price 1447 per MT

Physical Properties
Specific Gravity
1.46 g/cc
Water Absorption
0.090 % @Time 86400 sec
Linear Mold Shrinkage, Flow
0.0060 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
Linear Mold Shrinkage, Flow
0.0080 - 0.010 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse
0.0060 - 0.0080 cm/cm @Thickness 1.50 - 3.20 mm
Linear Mold Shrinkage, Transverse
0.0080 - 0.010 cm/cm @Thickness 3.20 mm

Mechanical Properties
Hardness, Rockwell R
112
Tensile Strength at Break
46.0 MPa
Tensile Strength, Yield
48.0 MPa
Flexural Yield Strength
89.0 MPa
Flexural Modulus
3.44 GPa
Izod Impact, Notched
0.800 J/cm
Izod Impact, Unnotched
16.02 J/cm

Thermal Properties
CTE, linear, Parallel to Flow
75.6 µm/m-°C @Temperature -40.0 - 40.0 °C
CTE, linear, Parallel to Flow
139 µm/m-°C @Temperature 60.0 - 138 °C
Deflection Temperature at 0.46 MPa (66 psi)
160 °C @Thickness 6.40 mm
Deflection Temperature at 1.8 MPa (264 psi)
87.0 °C @Thickness 6.40 mm
UL RTI, Electrical
105 °C
UL RTI, Mechanical with Impact
105 °C
UL RTI, Mechanical without Impact
105 °C
Flammability, UL94
HB @Thickness 1.47 mm

Electrical Properties
Volume Resistivity
6.90e+16 ohm-cm
Dielectric Constant
3.2 @Frequency 1.00e+6 Hz
Dielectric Constant
3.3 @Frequency 100 Hz
Dielectric Strength
23.2 kV/mm @Thickness 3.20 mm
Dielectric Strength
24.8 kV/mm @Thickness 1.60 mm
Dissipation Factor
0.0020 @Frequency 100 Hz
Dissipation Factor
0.014 @Frequency 1.00e+6 Hz
Arc Resistance
120 - 180 sec
Comparative Tracking Index
250 - 400 V
Hot Wire Ignition, HWI
30 - 60 sec
High Amp Arc Ignition, HAI
>= 120 arcs
High Voltage Arc-Tracking Rate, HVTR
80.0 - 150 mm/min

Descriptive Properties
Specific Volume
0.69cm^3/g

Alternative products

SABIC Innovative Plastics NORYL N300X PPE+PS (Asia Pacific) accurate 63%

$ 1633/MT

Specific Gravity: 1.10 g/cc
Moisture Absorption at Equilibrium: 0.060 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm
Melt Flow: 7.4 g/10 min @Load 5.00 kg, Temperature 280 °C

SABIC Innovative Plastics ULTEM 4000 PEI (Asia Pacific) accurate 56%

$ 1639/MT

Specific Gravity: 1.67 g/cc
Water Absorption: 0.11 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0020 - 0.0030 cm/cm @Thickness 3.20 mm
Melt Flow: 3.1 g/10 min @Load 6.60 kg, Temperature 337 °C
Hardness, Rockwell M: 85

SABIC Innovative Plastics NORYL N1250 PPE+HIPS (Asia Pacific) accurate 56%

$ 1650/MT

Specific Gravity: 1.10 g/cc
Density: 1.10 g/cc
Water Absorption: 0.070 % @Time 86400 sec
Moisture Absorption: 0.0500 %
Water Absorption at Saturation: 0.25 %

SABIC Innovative Plastics ULTEM CRS5311 PEI (Asia Pacific) accurate 63%

$ 1575/MT

Specific Gravity: 1.52 g/cc
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
Melt Flow: 4.0 g/10 min @Load 6.60 kg, Temperature 337 °C
Tensile Strength at Break: 165 MPa
Elongation at Break: 3.0 %

ChevronTexaco Texatherm® accurate 63%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

SABIC Innovative Plastics ULTEM CRS5311 PEI accurate 63%

$ 2222/MT

Specific Gravity: 1.52 g/cc
Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.20 mm
Melt Flow: 4.0 g/10 min @Load 6.60 kg, Temperature 337 °C
Tensile Strength at Break: 165 MPa
Elongation at Break: 3.0 %

SABIC Innovative Plastics NORYL ENG265 PPE+PS accurate 70%

$ 1833/MT

Specific Gravity: 1.06 g/cc
Water Absorption: 0.060 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Melt Flow: 8.4 g/10 min @Load 5.00 kg, Temperature 280 °C
Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 280 °C

SABIC Innovative Plastics NORYL N300X PPE+PS accurate 63%

$ 2319/MT

Specific Gravity: 1.10 g/cc
Moisture Absorption at Equilibrium: 0.060 %
Linear Mold Shrinkage, Flow: 0.0050 - 0.0070 cm/cm @Thickness 3.20 mm
Linear Mold Shrinkage, Transverse: 0.0050 - 0.0070 cm/cm
Melt Flow: 7.4 g/10 min @Load 5.00 kg, Temperature 280 °C

SABIC Innovative Plastics NORYL 731 PPE+PS accurate 63%

$ 1557/MT

Specific Gravity: 1.06 g/cc
Density: 1.06 g/cc
Water Absorption: 0.060 % @Time 86400 sec
Moisture Absorption: 0.0600 %
Water Absorption at Saturation: 0.23 %

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, luxury cruise ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for SABIC Innovative Plastics Valox® 745 PBT (Asia Pacific)

Seller from Sūrat – 2021-05-31:

Seller from Sūrat work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1447 per MT

Seller from Ankara – 2021-06-23:

Seller from Ankara work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2018 per MT

Seller from Madrid – 2021-06-20:

Seller from Madrid work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1601 per MT