Solvay Specialty Polymers Amodel® AS-4145 HS Polyphthalamide (PPA)  (Unverified Data**)

Seller in Mexico City price: $2439 per MT

Solvay Specialty Polymers Amodel® AS-4145 HS Polyphthalamide (PPA)  (Unverified Data**) in Polymer, Thermoplastic, Polyphthalamide (PPA)

  • Physical Properties
  • Density
  • 1.55 g/cc
  • Filler Content
  • 45 %
  • Water Absorption
  • 0.21 % @Time 86400 sec
  • Linear Mold Shrinkage, Flow
  • 0.0040 cm/cm
  • Linear Mold Shrinkage, Transverse
  • 0.0080 cm/cm
  • Mechanical Properties
  • Tensile Strength at Break
  • 186 MPa
  • Tensile Strength at Break
  • 224 MPa
  • Tensile Strength at Break
  • 228 MPa
  • Elongation at Break
  • 2.1 %
  • Elongation at Break
  • 2.2 %
  • Elongation at Break
  • 2.4 %
  • Tensile Modulus
  • 15.2 GPa
  • Tensile Modulus
  • 15.2 GPa
  • Tensile Modulus
  • 16.1 GPa
  • Flexural Strength
  • 327 MPa
  • Flexural Yield Strength
  • 269 MPa
  • Flexural Yield Strength
  • 328 MPa
  • Flexural Modulus
  • 13.1 GPa
  • Flexural Modulus
  • 13.1 GPa
  • Flexural Modulus
  • 13.4 GPa
  • Compressive Strength
  • 159 MPa
  • Compressive Strength
  • 172 MPa
  • Poissons Ratio
  • 0.40
  • Shear Modulus
  • 5.43 - 5.75 GPa
  • Shear Strength
  • 75.8 MPa
  • Shear Strength
  • 89.6 MPa
  • Izod Impact, Notched
  • 0.960 J/cm
  • Izod Impact, Notched
  • 1.00 J/cm
  • Izod Impact, Notched (ISO)
  • 10.0 kJ/m²
  • Charpy Impact Unnotched
  • 6.30 J/cm²
  • Charpy Impact, Notched
  • 1.00 J/cm²
  • Thermal Properties
  • CTE, linear, Parallel to Flow
  • 13.0 µm/m-°C @Temperature 149 - 249 °C
  • CTE, linear, Parallel to Flow
  • 16.0 µm/m-°C @Temperature 0.000 - 90.0 °C
  • CTE, linear, Transverse to Flow
  • 59.0 µm/m-°C @Temperature 0.000 - 90.0 °C
  • CTE, linear, Transverse to Flow
  • 110 µm/m-°C @Temperature 149 - 249 °C
  • Melting Point
  • 320 °C
  • Melting Point
  • 320 °C
  • Maximum Service Temperature, Air
  • 210 °C @Time 4.32e+6 sec
  • Deflection Temperature at 0.46 MPa (66 psi)
  • 320 °C @Thickness 3.18 mm
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 298 °C
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 300 °C @Thickness 3.18 mm
  • Flammability, UL94
  • HB @Thickness 3.18 mm
  • Electrical Properties
  • Volume Resistivity
  • 6.00e+14 ohm-cm
  • Volume Resistivity
  • 8.00e+15 ohm-cm
  • Dielectric Constant
  • 3.7 @Frequency 1.00e+6 Hz
  • Dielectric Constant
  • 4.0 @Frequency 1.00e+6 Hz
  • Dielectric Constant
  • 4.0 @Frequency 60.0 Hz
  • Dielectric Constant
  • 4.9 @Frequency 60.0 Hz
  • Dielectric Strength
  • 24.0 kV/mm @Thickness 1.59 mm
  • Dielectric Strength
  • 25.0 kV/mm @Thickness 1.59 mm
  • Dissipation Factor
  • 0.0040 @Frequency 60.0 Hz
  • Dissipation Factor
  • 0.011 @Frequency 1.00e+6 Hz
  • Dissipation Factor
  • 0.024 @Frequency 60.0 Hz
  • Dissipation Factor
  • 0.037 @Frequency 1.00e+6 Hz
  • Comparative Tracking Index
  • 600 V
  • Comparative Tracking Index
  • 600 V
  • High Voltage Arc-Tracking Rate, HVTR
  • 13.0 mm/min
  • High Voltage Arc-Tracking Rate, HVTR
  • 14.0 mm/min
  • Processing Properties
  • Feed Temperature
  • 79.4 °C
  • Rear Barrel Temperature
  • 318 - 324 °C
  • Front Barrel Temperature
  • 327 - 332 °C
  • Melt Temperature
  • 329 - 343 °C
  • Mold Temperature
  • 65.6 - 93.3 °C
  • Drying Temperature
  • 121 °C
  • Dry Time
  • 4.00 hour
  • Moisture Content
  • 0.10 %
  • Descriptive Properties
  • Additive
  • Heat Stabilizer
  • Additive
  • Lubricant
  • Additive
  • Mold Release
  • Appearance
  • Black
  • Automotive Specifications
  • ASTM D6779 PA102G45
  • Automotive Specifications
  • TYCO 100-1632 Color: BK-324 Black
  • Availability
  • Africa & Middle East
  • Availability
  • Asia Pacific
  • Availability
  • Europe
  • Availability
  • North America
  • Availability
  • South America
  • Features
  • Fast Molding Cycle
  • Features
  • Good Chemical Resistance
  • Features
  • Good Creep Resistance
  • Features
  • Good Dimensional Stability
  • Features
  • Good Stiffness
  • Features
  • Heat Stabilized
  • Features
  • High Heat Resistance
  • Features
  • High Strength
  • Features
  • Hot Water Moldability
  • Features
  • Low Moisture Absorption
  • Features
  • Lubricated
  • Forms
  • Pellets
  • Generic
  • PPA
  • Processing Method
  • Water-Heated Mold Injection Molding
  • RoHS Compliance
  • RoHS Compliant
  • Uses
  • Abrasive Cleaning Material

Alternative products

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, vessels for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

1 prices for Solvay Specialty Polymers Amodel® AS-4145 HS Polyphthalamide (PPA)  (Unverified Data**)

Seller from Mexico City – 2021-06-04:

Seller from Mexico City work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), BASF

Price: $2439 per MT

Share on Pinterest
Share on LinkedIn
Share on Reddit

Would you like to sell Solvay Specialty Polymers Amodel® AS-4145 HS Polyphthalamide (PPA)  (Unverified Data**)?

Plastic warehouse

Find a direct plastic supplier if you're interested in a supplier or Environment office in Singapore open-nearme.com