Solvay Specialty Polymers AvaSpire® AV-651 Polyaryletherketone (PAEK)  (Unverified Data**)

Seller in Dallas price: $2596 per MT

Solvay Specialty Polymers AvaSpire® AV-651 Polyaryletherketone (PAEK)  (Unverified Data**) in Polymer, Thermoplastic, Polyketone

  • Physical Properties
  • Specific Gravity
  • 1.29 g/cc
  • Water Absorption
  • 0.20 % @Time 86400 sec
  • Viscosity
  • 240000 cP @Shear Rate 1000 1/s, Temperature 400 °C
  • Linear Mold Shrinkage, Flow
  • 0.0070 - 0.0090 cm/cm @Thickness 3.18 mm
  • Linear Mold Shrinkage, Transverse
  • 0.010 - 0.012 cm/cm @Thickness 3.18 mm
  • Melt Flow
  • 25 g/10 min @Load 2.16 kg, Temperature 400 °C
  • Mechanical Properties
  • Hardness, Rockwell M
  • 94
  • Tensile Strength
  • 87.0 MPa
  • Tensile Strength, Yield
  • 89.0 MPa
  • Elongation at Break
  • >= 40 %
  • Elongation at Break
  • >= 40 %
  • Elongation at Yield
  • 5.7 %
  • Elongation at Yield
  • 6.2 %
  • Tensile Modulus
  • 3.00 GPa
  • Tensile Modulus
  • 3.20 GPa
  • Flexural Strength
  • 124 MPa
  • Flexural Strength
  • 127 MPa
  • Flexural Modulus
  • 3.10 GPa
  • Flexural Modulus
  • 3.20 GPa
  • Compressive Strength
  • 112 MPa
  • Shear Strength
  • 78.0 MPa
  • Izod Impact, Notched
  • 0.690 J/cm
  • Izod Impact, Notched
  • NB
  • Izod Impact, Notched (ISO)
  • 6.60 kJ/m²
  • Izod Impact, Unnotched (ISO)
  • NB
  • Thermal Properties
  • CTE, linear, Parallel to Flow
  • 47.0 µm/m-°C @Temperature -50.0 - 50.0 °C
  • Specific Heat Capacity
  • 1.31 J/g-°C @Temperature 50.0 °C
  • Specific Heat Capacity
  • 1.82 J/g-°C @Temperature 200 °C
  • Thermal Conductivity
  • 0.240 W/m-K
  • Melting Point
  • 345 °C
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 190 °C @Thickness 3.20 mm
  • Glass Transition Temp, Tg
  • 158 °C
  • Flammability, UL94
  • V-0 @Thickness 0.800 mm
  • Flammability, UL94
  • V-0 @Thickness 1.60 mm
  • Electrical Properties
  • Volume Resistivity
  • 5.00e+17 ohm-cm
  • Surface Resistance
  • >= 1.90e+17 ohm
  • Dielectric Constant
  • 3.1 @Frequency 1.00e+6 Hz
  • Dielectric Constant
  • 3.1 @Frequency 60.0 Hz
  • Dielectric Constant
  • 3.12 @Frequency 1000 Hz
  • Dielectric Strength
  • 16.0 kV/mm @Thickness 3.00 mm
  • Dissipation Factor
  • 0.0010 @Frequency 1000 Hz
  • Dissipation Factor
  • 0.0010 @Frequency 60.0 Hz
  • Dissipation Factor
  • 0.0040 @Frequency 1.00e+6 Hz
  • Processing Properties
  • Rear Barrel Temperature
  • 355 °C
  • Middle Barrel Temperature
  • 365 °C
  • Front Barrel Temperature
  • 370 °C
  • Nozzle Temperature
  • 375 °C
  • Melt Temperature
  • 365 - 390 °C
  • Mold Temperature
  • 150 - 180 °C
  • Drying Temperature
  • 150 °C
  • Dry Time
  • 4.00 hour
  • Descriptive Properties
  • Agency Ratings
  • ISO 10993
  • Agency Ratings
  • ISO 10993-Part 1
  • Appearance
  • Beige
  • Appearance
  • Natural Color
  • Availability
  • Africa & Middle East
  • Availability
  • Asia Pacific
  • Availability
  • Europe
  • Availability
  • North America
  • Availability
  • South America
  • Features
  • Autoclave Sterilizable
  • Features
  • Biocompatible
  • Features
  • Ductile
  • Features
  • E-beam Sterilizable
  • Features
  • Ethylene Oxide Sterilizable
  • Features
  • Fatigue Resistant
  • Features
  • Flame Retardant
  • Features
  • Good Chemical Resistance
  • Features
  • Good Dimensional Stability
  • Features
  • Good Impact Resistance
  • Features
  • Good Sterilizability
  • Features
  • Heat Sterilizable
  • Features
  • High Heat Resistance
  • Features
  • Radiation (Gamma) Resistant
  • Features
  • Radiation Sterilizable
  • Features
  • Radiotranslucent
  • Features
  • Steam Resistant
  • Features
  • Steam Sterilizable
  • Forms
  • Pellets
  • Generic
  • PAEK
  • Injection Rate
  • Fast
  • Processing Method
  • Extrusion Blow Molding
  • Processing Method
  • Fiber (Spinning) Extrusion
  • Processing Method
  • Film Extrusion
  • Processing Method
  • Injection Blow Molding
  • Processing Method
  • Injection Molding
  • Processing Method
  • Machining
  • Processing Method
  • Profile Extrusion
  • Processing Method
  • Thermoforming
  • Processing Method
  • Wire & Cable Extrusion
  • RoHS Compliance
  • RoHS Compliant
  • Screw Compression Ratio
  • 2.0:1.0 to 3.0:1.0
  • Uses
  • Aerospace Applications
  • Uses
  • Aircraft Applications
  • Uses
  • Bearings
  • Uses
  • Dental Applications
  • Uses
  • Film
  • Uses
  • Hospital Goods
  • Uses
  • Industrial Applications
  • Uses
  • Medical Appliances
  • Uses
  • Medical/Healthcare Applications
  • Uses
  • Oil/Gas Applications
  • Uses
  • Pump Parts
  • Uses
  • Seals
  • Uses
  • Surgical Instruments

Alternative products

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ships for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

1 prices for Solvay Specialty Polymers AvaSpire® AV-651 Polyaryletherketone (PAEK)  (Unverified Data**)

Seller from Dallas – 2021-06-13:

Seller from Dallas work with company: RTP Company, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2596 per MT

Share on Pinterest
Share on LinkedIn
Share on Reddit

Would you like to sell Solvay Specialty Polymers AvaSpire® AV-651 Polyaryletherketone (PAEK)  (Unverified Data**)?

Plastic warehouse

Find a direct plastic supplier if you're interested in a supplier or Water damage restoration service in Singapore open-nearme.com