Solvay Specialty Polymers Cogegum® AFR/720-UV Polyolefin, Unspecified (Unverified Data**) price 1444 per MT

Physical Properties
Specific Gravity
1.48 g/cc
ESCR 10% Igepal®
>= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
Melt Flow
4.0 g/10 min @Load 21.6 kg, Temperature 150 °C

Mechanical Properties
Hardness, Shore D
47
Tensile Strength at Break
14.5 MPa
Elongation at Break
180 %

Thermal Properties
Maximum Service Temperature, Air
300 °C
Oxygen Index
39 %

Electrical Properties
Volume Resistivity
5.50e+12 ohm-cm @Temperature 70.0 °C
Volume Resistivity
4.10e+14 ohm-cm @Temperature 20.0 °C
Insulation Resistivity
20.0 Megaohm/1000 m @Temperature 70.0 °C
Insulation Resistivity
1500 Megaohm/1000 m @Temperature 20.0 °C

Processing Properties
Processing Temperature
150 - 170 °C
Zone 1
130 - 150 °C
Zone 2
130 - 160 °C
Zone 3
140 - 160 °C
Zone 4
140 - 160 °C
Die Temperature
150 - 180 °C
Head Temperature
150 - 170 °C

Descriptive Properties
Availability
Asia Pacific
Availability
Europe
Availability
North America
Bending Test
Pass
Calorific Potential
16.2 MJ/kg
Cold Impact
Pass
Corrosive Gas in Smoke
< 10.0 µS/mm
Corrosive Gas in Smoke
pH > 4.30
Features
Flame Retardant
Features
Good UV Resistance
Features
Halogen Free
Features
Low Smoke Emission
Features
Low Toxicity
Features
Self Extinguishing
Generic
Polyolefin, Unspecified
Halogenidric Acid Emissions
< 0.10%
Heat Shock
Pass
Hot Pressure Test
< 50%
Hydrocarbons Immersion Test, 25°C, 4 hr
-10
Hydrocarbons Immersion Test, 25°C, 4 hr
-8
Mechanical Properties After Aging in Air Oven, 100°C, 168 hr
-14
Mechanical Properties After Aging in Air Oven, 100°C, 168 hr
6
Mechanical Properties After Aging in Air Oven, 80°C, 168 hr
-11
Mechanical Properties After Aging in Air Oven, 80°C, 168 hr
-5
RoHS Compliance
RoHS Compliant
SAE 20 Oil Immersion Test, 70°C, 4 hr
-25
SAE 20 Oil Immersion Test, 70°C, 4 hr
9
Uses
Cable Jacketing
Uses
Low Voltage Insulation
Uses
Wire & Cable Applications
UV/VIS Radiation Exposure Test, 65°C, 750 hr
3
UV/VIS Radiation Exposure Test, 65°C, 750 hr
5
Water Absorption (mg/cm²)
3.7

Alternative products

ChevronTexaco 46 Heat Transfer Oil accurate 77%

$ 2438/MT

Specific Gravity: 0.3215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 113 QSI Quantum Silicones 13 Durometer Condensation Cured Moldmaking Material accurate 77%

$ 2505/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.23 g/cc
Specific Gravity: 1.23 g/cc

ChevronTexaco Texatherm® accurate 99%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 2128 QSI Quantum Silicones 28 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1508/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc

ACC QM 122 QSI Quantum Silicones 22 Durometer Condensation Cured Moldmaking Material accurate 66%

$ 2077/MT

Specific Gravity: 0.970 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.25 g/cc
Specific Gravity: 1.25 g/cc

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

ChevronTexaco 22 Heat Transfer Oil accurate 88%

$ 2024/MT

Specific Gravity: 0.6083 g/cc
Specific Gravity: 0.655 g/cc
Specific Gravity: 0.6916 g/cc
Specific Gravity: 0.729 g/cc
Specific Gravity: 0.7658 g/cc

ACC QM128 QSI Quantum Silicones 28 Durometer Condensation Cured Moldmaking Material accurate 66%

$ 1987/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.30 g/cc
Specific Gravity: 1.30 g/cc

ACC QM 107 QSI Quantum Silicones 7 Durometer Condensation Cure Moldmaking Material accurate 77%

$ 1982/MT

Specific Gravity: 0.950 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.20 g/cc
Specific Gravity: 1.20 g/cc

ACC QM 118 QSI Quantum Silicones 18 Durometer Condensation Cured Moldmaking Material accurate 77%

$ 1483/MT

Specific Gravity: 0.950 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.24 g/cc
Specific Gravity: 1.24 g/cc

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ship for sales. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for Solvay Specialty Polymers Cogegum® AFR/720-UV Polyolefin, Unspecified (Unverified Data**)

Seller from Melbourne – 2021-06-19:

Seller from Melbourne work with company: Solvay, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co., ALIMEX GmbH

Price: $2358 per MT

Seller from Barcelona – 2021-06-28:

Seller from Barcelona work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2091 per MT

Seller from Belo Horizonte – 2021-04-09:

Seller from Belo Horizonte work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1444 per MT

Seller from Chicago – 2021-08-04:

Seller from Chicago work with company: 3M, Solvay, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics)

Price: $1813 per MT