Solvay Specialty Polymers Cogegum® AFR/920-UV Polyolefin, Unspecified (Unverified Data**) price 1757 per MT

Physical Properties
Specific Gravity
1.43 g/cc
ESCR 10% Igepal®
>= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
Melt Flow
18 g/10 min @Load 21.6 kg, Temperature 190 °C

Mechanical Properties
Hardness, Shore D
50
Tensile Strength at Break
14.5 MPa
Elongation at Break
190 %

Thermal Properties
Maximum Service Temperature, Air
280 °C
Oxygen Index
37 %

Electrical Properties
Volume Resistivity
5.40e+13 ohm-cm @Temperature 70.0 °C
Volume Resistivity
8.10e+14 ohm-cm @Temperature 20.0 °C
Insulation Resistivity
200 Megaohm/1000 m @Temperature 70.0 °C
Insulation Resistivity
3000 Megaohm/1000 m @Temperature 20.0 °C

Processing Properties
Processing Temperature
170 - 180 °C
Zone 1
130 - 150 °C
Zone 2
150 - 170 °C
Zone 3
160 - 180 °C
Zone 4
170 - 180 °C
Die Temperature
180 - 200 °C
Head Temperature
180 - 190 °C

Descriptive Properties
Availability
Asia Pacific
Availability
Europe
Availability
North America
Bending Test
Pass
Calorific Potential
18 MJ/kg
Cold Impact
Pass
Corrosive Gas in Smoke
< 10.0 µS/mm
Corrosive Gas in Smoke
pH > 4.30
Features
Flame Retardant
Features
Good UV Resistance
Features
Halogen Free
Features
Low Smoke Emission
Features
Low Toxicity
Features
Self Extinguishing
Generic
Polyolefin, Unspecified
Halogenidric Acid Emissions
< 0.10%
Heat Shock
Pass
Hot Pressure Test
< 50%
Hydrocarbons Immersion Test, 25°C, 4 hr
12
Hydrocarbons Immersion Test, 25°C, 4 hr
-8
Mechanical Properties After Aging in Air Oven, 110°C, 168 hr
10
Mechanical Properties After Aging in Air Oven, 110°C, 168 hr
-12
Mechanical Properties After Aging in Air Oven, 80°C, 168 hr
-15
Mechanical Properties After Aging in Air Oven, 80°C, 168 hr
5
RoHS Compliance
RoHS Compliant
SAE 20 Oil Immersion Test, 70°C, 4 hr
15
SAE 20 Oil Immersion Test, 70°C, 4 hr
-8
Uses
Cable Jacketing
Uses
Low Voltage Insulation
Uses
Wire & Cable Applications
UV/VIS Radiation Exposure Test, 65°C, 750 hr
0
UV/VIS Radiation Exposure Test, 65°C, 750 hr
-7
Water Absorption (mg/cm²)
1
Water Immersion Test, 70°C, 168 hr
-13
Water Immersion Test, 70°C, 168 hr
-18

Alternative products

ChevronTexaco 46 Heat Transfer Oil accurate 77%

$ 2438/MT

Specific Gravity: 0.3215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 113 QSI Quantum Silicones 13 Durometer Condensation Cured Moldmaking Material accurate 77%

$ 2505/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.23 g/cc
Specific Gravity: 1.23 g/cc

ChevronTexaco Texatherm® accurate 99%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 2128 QSI Quantum Silicones 28 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1508/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

ChevronTexaco 22 Heat Transfer Oil accurate 88%

$ 2024/MT

Specific Gravity: 0.6083 g/cc
Specific Gravity: 0.655 g/cc
Specific Gravity: 0.6916 g/cc
Specific Gravity: 0.729 g/cc
Specific Gravity: 0.7658 g/cc

ACC QM128 QSI Quantum Silicones 28 Durometer Condensation Cured Moldmaking Material accurate 66%

$ 1987/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.30 g/cc
Specific Gravity: 1.30 g/cc

ACC QM 107 QSI Quantum Silicones 7 Durometer Condensation Cure Moldmaking Material accurate 77%

$ 1982/MT

Specific Gravity: 0.950 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.20 g/cc
Specific Gravity: 1.20 g/cc

ACC QM 118 QSI Quantum Silicones 18 Durometer Condensation Cured Moldmaking Material accurate 77%

$ 1483/MT

Specific Gravity: 0.950 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.24 g/cc
Specific Gravity: 1.24 g/cc

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ships for sale norway. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Solvay Specialty Polymers Cogegum® AFR/920-UV Polyolefin, Unspecified (Unverified Data**)

Seller from Ōsaka – 2021-07-06:

Seller from Ōsaka work with company: Solvay, RTP Company, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics)

Price: $1957 per MT

Seller from Chongqing – 2021-07-19:

Seller from Chongqing work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1757 per MT

Seller from Santiago – 2021-03-11:

Seller from Santiago work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2590 per MT