Solvay Specialty Polymers Cogegum® GFR/350 Polyolefin, Unspecified (Unverified Data**) price 1701 per MT

Physical Properties
Specific Gravity
1.40 g/cc
ESCR 10% Igepal®
>= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
Melt Flow
3.5 g/10 min @Load 21.6 kg, Temperature 190 °C

Mechanical Properties
Hardness, Shore D
38
Tensile Strength at Break
12.3 MPa
Elongation at Break
210 %

Thermal Properties
Maximum Service Temperature, Air
300 °C
Oxygen Index
38 %
Shrinkage
<= 4.0 % @Temperature 100 °C, Time 3600 sec

Electrical Properties
Volume Resistivity
5.40e+13 ohm-cm @Temperature 90.0 °C
Volume Resistivity
6.70e+14 ohm-cm @Temperature 20.0 °C
Insulation Resistivity
200 Megaohm/1000 m @Temperature 90.0 °C
Insulation Resistivity
2500 Megaohm/1000 m @Temperature 20.0 °C

Processing Properties
Processing Temperature
160 - 180 °C
Zone 1
120 - 140 °C
Zone 2
130 - 150 °C
Zone 3
140 - 160 °C
Zone 4
150 - 170 °C
Die Temperature
180 - 210 °C
Head Temperature
160 - 180 °C

Descriptive Properties
Availability
Asia Pacific
Availability
Europe
Availability
North America
Bending Test
No cracks
Calorific Potential
18.6 MJ/kg
Corrosive Gas in Smoke
< 10.0 µS/mm
Corrosive Gas in Smoke
pH > 4.30
Features
Crosslinkable
Features
Flame Retardant
Features
Halogen Free
Features
Low Smoke Emission
Features
Low Toxicity
Features
Self Extinguishing
Generic
Polyolefin, Unspecified
Halogenidric Acid Emissions
< 0.10%
Hot Pressure Test
< 50%
Hot Set (%)
0
Hot Set (%)
50
Impact Test; IEC 60811
No cracks
Mechanical Properties After Aging in Air Bomb, 0.55 MPa, 127°C, 40 hr
-15
Mechanical Properties After Aging in Air Bomb, 0.55 MPa, 127°C, 40 hr
18
Mechanical Properties After Aging in Air Oven, 135°C, 168 hr
10
Mechanical Properties After Aging in Air Oven, 135°C, 168 hr
-5
RoHS Compliance
RoHS Compliant
Uses
Cable Jacketing
Uses
Low Voltage Insulation
Uses
Wire & Cable Applications
Water Absorption (mg/cm²)
< 4.00

Alternative products

ChevronTexaco 46 Heat Transfer Oil accurate 77%

$ 2438/MT

Specific Gravity: 0.3215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 113 QSI Quantum Silicones 13 Durometer Condensation Cured Moldmaking Material accurate 77%

$ 2505/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.23 g/cc
Specific Gravity: 1.23 g/cc

ChevronTexaco Texatherm® accurate 99%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

ACC QM 2128 QSI Quantum Silicones 28 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1508/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc

ACC QM 122 QSI Quantum Silicones 22 Durometer Condensation Cured Moldmaking Material accurate 66%

$ 2077/MT

Specific Gravity: 0.970 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.25 g/cc
Specific Gravity: 1.25 g/cc

Fujipoly Industries Sarcon® NR-c Gap Filler Pad Non-Silicone accurate 66%

$ 1533/MT

Specific Gravity: 2.10 g/cc
Specific Gravity: 2.10 g/cc
Specific Gravity: 2.10 g/cc
Specific Gravity: 2.10 g/cc
Specific Gravity: 2.10 g/cc

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 88%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

ChevronTexaco 22 Heat Transfer Oil accurate 88%

$ 2024/MT

Specific Gravity: 0.6083 g/cc
Specific Gravity: 0.655 g/cc
Specific Gravity: 0.6916 g/cc
Specific Gravity: 0.729 g/cc
Specific Gravity: 0.7658 g/cc

ACC QM 107 QSI Quantum Silicones 7 Durometer Condensation Cure Moldmaking Material accurate 77%

$ 1982/MT

Specific Gravity: 0.950 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.20 g/cc
Specific Gravity: 1.20 g/cc

ACC QM 118 QSI Quantum Silicones 18 Durometer Condensation Cured Moldmaking Material accurate 77%

$ 1483/MT

Specific Gravity: 0.950 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.03 g/cc
Specific Gravity: 1.24 g/cc
Specific Gravity: 1.24 g/cc

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng carrier for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

2 prices for Solvay Specialty Polymers Cogegum® GFR/350 Polyolefin, Unspecified (Unverified Data**)

Seller from Hong Kong – 2021-03-26:

Seller from Hong Kong work with company: Celanese Corporation, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1701 per MT

Seller from Buenos Aires – 2021-04-10:

Seller from Buenos Aires work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2463 per MT