Solvay Specialty Polymers KetaSpire® KT-880 Polyetheretherketone (PEEK)  (Unverified Data**)

Seller in Lagos price: $1671 per MT
Seller in Philadelphia price: $2270 per MT
Seller in Manila price: $2274 per MT

Solvay Specialty Polymers KetaSpire® KT-880 Polyetheretherketone (PEEK)  (Unverified Data**) in Polymer, Thermoplastic, Polyketone, Polyetheretherketone (PEEK)

  • Physical Properties
  • Specific Gravity
  • 1.30 g/cc
  • Water Absorption
  • 0.10 % @Time 86400 sec
  • Viscosity
  • 150000 cP @Shear Rate 1000 1/s, Temperature 400 °C
  • Linear Mold Shrinkage, Flow
  • 0.014 - 0.016 cm/cm @Thickness 0.318 mm
  • Linear Mold Shrinkage, Transverse
  • 0.015 - 0.017 cm/cm @Thickness 3.18 mm
  • Melt Flow
  • 36 g/10 min @Load 2.16 kg, Temperature 400 °C
  • Mechanical Properties
  • Hardness, Rockwell M
  • 102
  • Tensile Strength
  • 100 MPa
  • Tensile Strength, Yield
  • 102 MPa
  • Elongation at Break
  • 10 - 20 %
  • Elongation at Break
  • 10 - 20 %
  • Elongation at Yield
  • 5.0 %
  • Elongation at Yield
  • 5.2 %
  • Tensile Modulus
  • 3.70 GPa
  • Tensile Modulus
  • 4.00 GPa
  • Flexural Strength
  • 134 MPa
  • Flexural Strength
  • 153 MPa
  • Flexural Modulus
  • 3.80 GPa
  • Flexural Modulus
  • 3.90 GPa
  • Compressive Strength
  • 123 MPa
  • Poissons Ratio
  • 0.37
  • Shear Modulus
  • 1.35 - 1.46 GPa
  • Shear Strength
  • 95.1 MPa
  • Izod Impact, Notched
  • 0.530 J/cm
  • Izod Impact, Notched
  • NB
  • Izod Impact, Notched (ISO)
  • 4.90 kJ/m²
  • Izod Impact, Unnotched (ISO)
  • NB
  • Thermal Properties
  • CTE, linear, Parallel to Flow
  • 50.0 µm/m-°C @Temperature -50.0 - 50.0 °C
  • Specific Heat Capacity
  • 1.33 J/g-°C @Temperature 50.0 °C
  • Specific Heat Capacity
  • 1.93 J/g-°C @Temperature 200 °C
  • Thermal Conductivity
  • 0.250 W/m-K
  • Melting Point
  • 343 °C
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 160 °C
  • Glass Transition Temp, Tg
  • 147 °C
  • Electrical Properties
  • Volume Resistivity
  • 3.80e+17 ohm-cm
  • Surface Resistance
  • >= 1.90e+17 ohm
  • Dielectric Constant
  • 3.01 @Frequency 1000 Hz
  • Dielectric Constant
  • 3.07 @Frequency 1.00e+6 Hz
  • Dielectric Constant
  • 3.1 @Frequency 60.0 Hz
  • Dielectric Strength
  • 15.0 kV/mm @Thickness 3.00 mm
  • Dissipation Factor
  • 0.0010 @Frequency 1000 Hz
  • Dissipation Factor
  • 0.0010 @Frequency 60.0 Hz
  • Dissipation Factor
  • 0.0030 @Frequency 1.00e+6 Hz
  • Processing Properties
  • Rear Barrel Temperature
  • 355 °C
  • Middle Barrel Temperature
  • 365 °C
  • Front Barrel Temperature
  • 370 °C
  • Nozzle Temperature
  • 375 °C
  • Mold Temperature
  • 175 - 205 °C
  • Drying Temperature
  • 150 °C
  • Dry Time
  • 4.00 hour
  • Descriptive Properties
  • Agency Ratings
  • ISO 10993
  • Agency Ratings
  • ISO 10993-Part 1
  • Appearance
  • Black
  • Appearance
  • Natural Color
  • Availability
  • Africa & Middle East
  • Availability
  • Asia Pacific
  • Availability
  • Europe
  • Availability
  • North America
  • Availability
  • South America
  • Features
  • Autoclave Sterilizable
  • Features
  • Biocompatible
  • Features
  • Ductile
  • Features
  • E-beam Sterilizable
  • Features
  • Ethylene Oxide Sterilizable
  • Features
  • Fatigue Resistant
  • Features
  • Flame Retardant
  • Features
  • Good Chemical Resistance
  • Features
  • Good Dimensional Stability
  • Features
  • Good Impact Resistance
  • Features
  • Good Sterilizability
  • Features
  • Heat Sterilizable
  • Features
  • High Flow
  • Features
  • High Heat Resistance
  • Features
  • Radiation (Gamma) Resistant
  • Features
  • Radiation Sterilizable
  • Features
  • Radiotranslucent
  • Features
  • Steam Resistant
  • Features
  • Steam Sterilizable
  • Forms
  • Pellets
  • Generic
  • PEEK
  • Injection Rate
  • Fast
  • Processing Method
  • Extrusion Blow Molding
  • Processing Method
  • Fiber (Spinning) Extrusion
  • Processing Method
  • Film Extrusion
  • Processing Method
  • Injection Molding
  • Processing Method
  • Machining
  • Processing Method
  • Profile Extrusion
  • Processing Method
  • Thermoforming
  • Processing Method
  • Wire & Cable Extrusion
  • RoHS Compliance
  • RoHS Compliant
  • Screw Compression Ratio
  • 2.5:1.0 to 3.5:1.0
  • Uses
  • Aircraft Applications
  • Uses
  • Connectors
  • Uses
  • Dental Applications
  • Uses
  • Electrical/Electronic Applications
  • Uses
  • Film
  • Uses
  • Hospital Goods
  • Uses
  • Industrial Applications
  • Uses
  • Medical Appliances
  • Uses
  • Medical/Healthcare Applications
  • Uses
  • Oil/Gas Applications
  • Uses
  • Pump Parts
  • Uses
  • Seals
  • Uses
  • Surgical Instruments

Alternative products

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng tankers for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Solvay Specialty Polymers KetaSpire® KT-880 Polyetheretherketone (PEEK)  (Unverified Data**)

Seller from Lagos – 2021-04-05:

Seller from Lagos work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1671 per MT

Seller from Philadelphia – 2021-04-12:

Seller from Philadelphia work with company: Solvay, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $2270 per MT

Seller from Manila – 2021-08-17:

Seller from Manila work with company: 3M, PolyOne Corporation, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics)

Price: $2274 per MT

Share on Pinterest
Share on LinkedIn
Share on Reddit

Would you like to sell Solvay Specialty Polymers KetaSpire® KT-880 Polyetheretherketone (PEEK)  (Unverified Data**)?

Plastic warehouse

Find a direct plastic supplier if you're interested in a supplier or Hot water system supplier in Singapore open-nearme.com