Solvay Specialty Polymers Udel® P-3500 LCD MB Polysulfone (PSU) (Unverified Data**) price 2188 per MT

Physical Properties
Specific Gravity
1.24 g/cc
Water Absorption
0.30 % @Time 86400 sec
Viscosity
2000 - 2800 cP @Shear Rate 30.0 1/s, Temperature 40.0 °C
Viscosity
2200 - 3000 cP @Shear Rate 30.0 1/s, Temperature 40.0 °C
Viscosity
2400 - 3200 cP @Shear Rate 30.0 1/s, Temperature 40.0 °C
Molecular Weight
77000 - 83000 g/mol
Molecular Weight
78000 - 84000 g/mol
Molecular Weight
80000 - 86000 g/mol

Mechanical Properties
Tensile Strength at Break
70.3 MPa
Elongation at Break
50 - 100 %
Tensile Modulus
2.48 GPa
Flexural Strength
106 MPa
Flexural Modulus
2.69 GPa
Izod Impact, Notched
0.690 J/cm
Tensile Impact Strength
420 kJ/m²

Thermal Properties
CTE, linear, Parallel to Flow
56.0 µm/m-°C
Deflection Temperature at 1.8 MPa (264 psi)
174 °C

Electrical Properties
Volume Resistivity
3.00e+16 ohm-cm
Dielectric Constant
3.02 @Frequency 1.00e+6 Hz
Dielectric Constant
3.03 @Frequency 60.0 Hz
Dielectric Constant
3.04 @Frequency 1000 Hz
Dielectric Strength
17.0 kV/mm
Dissipation Factor
0.0010 @Frequency 1000 Hz
Dissipation Factor
0.0060 @Frequency 1.00e+6 Hz
Dissipation Factor
0.0070 @Frequency 60.0 Hz

Processing Properties
Zone 1
302 °C
Zone 5
316 - 338 °C
Melt Temperature
316 - 371 °C
Drying Temperature
135 - 163 °C
Dry Time
3.50 hour

Descriptive Properties
Agency Ratings
FDA 21 CFR 177.1655
Agency Ratings
NSF Unspecified Rating
Appearance
Natural Color
Availability
Asia Pacific
Availability
Europe
Availability
North America
Availability
South America
Features
Acid Resistant
Features
Alcohol Resistant
Features
Alkali Resistant
Features
Good Chemical Resistance
Features
Good Toughness
Features
High Heat Resistance
Features
Hydrocarbon Resistant
Features
Hydrolytically Stable
Forms
Pellets
Generic
PSU
Processing Method
Cast Film
Processing Method
Injection Molding
Processing Method
Solution Processing
RoHS Compliance
RoHS Compliant
Uses
Membranes

Alternative products

Solvay Specialty Polymers Udel® P-1710 Polysulfone (PSU) (Unverified Data**) accurate 74%

$ 1474/MT

Specific Gravity: 1.24 g/cc
Water Absorption: 0.30 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0070 cm/cm
Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 343 °C
Tensile Strength: 70.3 MPa

Solvay Specialty Polymers Udel® P-1800 Polysulfone (PSU) (discontinued **) accurate 74%

$ 1514/MT

Specific Gravity: 1.24 g/cc
Water Absorption: 0.30 %
Linear Mold Shrinkage, Flow: 0.0070 cm/cm
Melt Flow: 6.5 g/10 min @Load 2.16 kg, Temperature 343 °C
Tensile Strength: 70.3 MPa

Solvay Specialty Polymers Amodel® AT-5001 Polyphthalamide (PPA) Resin, Dry as Molded (discontinued **) accurate 91%

$ 1641/MT

Specific Gravity: 1.10 g/cc
Specific Gravity: 1.10 g/cc
Moisture Absorption at Equilibrium: 0.50 %
Linear Mold Shrinkage: 0.020 cm/cm
Tensile Strength at Break: 53.0 MPa

Solvay Specialty Polymers Udel® P-3500 LCD MB Polysulfone (PSU) accurate 74%

$ 1687/MT

Density: 1.24 g/cc
Water Absorption: 0.30 % @Time 86400 sec
Tensile Strength at Break: 70.3 MPa
Elongation at Break: 50 - 100 %
Tensile Modulus: 2.48 GPa

Solvay Specialty Polymers Udel® P-1700 LCD Polysulfone (PSU) (Unverified Data**) accurate 74%

$ 1791/MT

Specific Gravity: 1.24 g/cc
Water Absorption: 0.30 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0070 cm/cm
Melt Flow: 6.5 g/10 min @Load 2.16 kg, Temperature 343 °C
Tensile Strength: 70.3 MPa

Solvay Specialty Polymers Udel® P-3500 LCD Polysulfone (PSU) (Unverified Data**) accurate 82%

$ 1562/MT

Specific Gravity: 1.24 g/cc
Water Absorption: 0.30 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0070 cm/cm
Melt Flow: 3.0 - 5.0 g/10 min @Load 2.16 kg, Temperature 343 °C
Tensile Strength at Break: 70.3 MPa

Solvay Specialty Polymers Udel® P-1700 Polysulfone (PSU) (Unverified Data**) accurate 82%

$ 2376/MT

Specific Gravity: 1.24 g/cc
Water Absorption: 0.30 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0070 cm/cm
Melt Flow: 6.5 g/10 min @Load 2.06 kg, Temperature 343 °C
Tensile Strength: 70.3 MPa

Solvay Specialty Polymers Amodel® AT-1002 HS Polyphthalamide (PPA) (Unverified Data**) accurate 99%

$ 1694/MT

Density: 1.13 g/cc
Water Absorption: 0.50 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.020 cm/cm
Linear Mold Shrinkage, Transverse: 0.021 cm/cm
Tensile Strength at Break: 68.3 MPa @Temperature 23.0 °C

Solvay Specialty Polymers Udel® P-1750 MR Polysulfone (PSU) (Unverified Data**) accurate 82%

$ 1492/MT

Specific Gravity: 1.24 g/cc
Water Absorption: 0.30 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0070 cm/cm
Melt Flow: 6.5 g/10 min @Load 2.06 kg, Temperature 343 °C
Tensile Strength: 70.3 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng tankers for sale listing. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: a.kutuzov@plastic-price.com

Work with plastics from August, 2015

3 prices for Solvay Specialty Polymers Udel® P-3500 LCD MB Polysulfone (PSU) (Unverified Data**)

Seller from Hanoi – 2021-06-18:

Seller from Hanoi work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co.

Price: $2596 per MT

Seller from Bangkok – 2021-04-07:

Seller from Bangkok work with company: Solvay, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $2188 per MT

Seller from Sūrat – 2021-05-01:

Seller from Sūrat work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2562 per MT