Wolf Kunststoff ZEDEX® ZX-324V2T A3F PEEK, PTFE Modified

Seller in Taipei price: $1615 per MT
Seller in Madrid price: $2440 per MT

Wolf Kunststoff ZEDEX® ZX-324V2T A3F PEEK, PTFE Modified in Polymer, Thermoplastic, Polyketone, Polyetheretherketone (PEEK), Polyetheretherketone, PEEK, PTFE-Filled

  • Physical Properties
  • Density
  • 1.33 g/cc
  • Water Absorption
  • 0.10 % @Temperature 23.0 °C
  • Moisture Absorption at Equilibrium
  • 0.50 %
  • Mechanical Properties
  • Hardness, Shore A
  • 100
  • Hardness, Shore D
  • 87
  • Ball Indentation Hardness
  • 175 MPa
  • Tensile Strength at Break
  • 90.0 MPa
  • Tensile Strength
  • 92.0 MPa
  • Tensile Stress
  • 26.0 MPa @Strain 1.00 %, Time 3.60e+6 sec
  • Tensile Strength, Yield
  • 76.0 MPa
  • Tensile Strength, Yield
  • 92.0 MPa
  • Elongation at Break
  • 23.9 %
  • Elongation at Break
  • 23.9 %
  • Elongation at Yield
  • 1.5 %
  • Elongation at Yield
  • 5.7 %
  • Elongation at Yield
  • 6.9 %
  • Elongation at Yield
  • 6.9 %
  • Tensile Modulus
  • 3.50 GPa
  • Flexural Strength
  • 110 MPa
  • Flexural Strength
  • 127 MPa
  • Flexural Modulus
  • 3.90 GPa
  • Compressive Yield Strength
  • 103 MPa
  • Compressive Strength
  • 76.0 MPa
  • Compressive Strength
  • 103 MPa
  • Compressive Strength
  • 35.0 MPa @Time 3.60e+7 sec
  • Compressive Strength
  • 67.0 MPa @Time 360000 sec
  • Compressive Strength
  • 81.0 MPa @Time 36.0 sec
  • Compressive Strength
  • 80.0 MPa @Strain 3.50 %
  • Compressive Modulus
  • 2.54 GPa
  • Fatigue Strength
  • 56.0 MPa @# of Cycles 1.00e+6
  • K Factor (ISO)
  • 1.4 µm/km @Temperature 100 °C
  • K Factor (ISO)
  • 4.8 µm/km @Temperature 200 °C
  • K Factor (ISO)
  • 6.4 µm/km @Temperature 240 °C
  • K Factor (ISO)
  • 12.1 µm/km @Temperature 20.0 °C
  • Charpy Impact Unnotched
  • NB
  • Charpy Impact, Notched
  • 0.630 J/cm²
  • Coefficient of Friction, Dynamic
  • 0.090 @Temperature 100 °C
  • Coefficient of Friction, Dynamic
  • 0.16 @Temperature 20.0 °C
  • Coefficient of Friction, Static
  • 0.13 @Temperature 20.0 °C
  • Tensile Creep Modulus, 1000 hours
  • 2500 MPa
  • Limiting Pressure Velocity
  • 0.46666 MPa-m/sec
  • Limiting Pressure Velocity
  • 0.500 MPa-m/sec
  • Limiting Pressure Velocity
  • 0.66666 MPa-m/sec
  • Limiting Pressure Velocity
  • 1.0355 MPa-m/sec
  • Compression Set
  • 3.3 %
  • Compression Set
  • 5.4 %
  • Compression Set
  • 5.4 %
  • Thermal Properties
  • CTE, linear
  • 62.0 µm/m-°C @Temperature <=100 °C
  • CTE, linear
  • 65.0 µm/m-°C @Temperature <=150 °C
  • Specific Heat Capacity
  • 1.05 J/g-°C
  • Melting Point
  • 340 °C
  • Maximum Service Temperature, Air
  • 115 °C
  • Maximum Service Temperature, Air
  • 250 °C
  • Maximum Service Temperature, Air
  • 260 °C
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 171 °C
  • Glass Transition Temp, Tg
  • 146 °C
  • Flammability, UL94
  • V-0
  • Electrical Properties
  • Volume Resistivity
  • 6.00e+16 ohm-cm
  • Surface Resistance
  • 6.80e+12 ohm
  • Dielectric Constant
  • 3.3 @Frequency 110 Hz
  • Dielectric Strength
  • 27.0 kV/mm
  • Dissipation Factor
  • 0.0020
  • Dissipation Factor
  • 0.061 @Frequency 1.00 Hz
  • Descriptive Properties
  • Alignment Adjustment
  • 4
  • Chemical Sterilization
  • 10
  • Color
  • Beige
  • Creep Resistance
  • 5
  • Dimensional Stability with Thermal Expansion
  • 5
  • FDA Compliant
  • Applicable
  • Free from Silicon
  • Applicable
  • Gamma-rays Radiation Sterilization
  • 7
  • High Precision Bushings (negative clearance)
  • Applicable
  • Injection Molded Parts
  • Applicable
  • Machined Parts
  • Applicable
  • Moist Heat Sterilization
  • 10
  • Plastic Granules
  • Applicable
  • Resistance Against dust, Dirt, Abrasive Substances
  • 7
  • Resistance Against Hot Water
  • 200
  • Resistance to Chemicals
  • 9
  • Resistant Against Disinfectant
  • Applicable
  • Rods up to Øe (de)
  • Applicable
  • ROHS/WEEE
  • Applicable
  • Sheets up to Maximum Thickness
  • Applicable
  • Sliding Velocity
  • 200
  • Suitable for Outdoor Use
  • 7
  • Suitable for Use in Water
  • Applicable
  • Suitable for Vacuum
  • Applicable
  • Tubes (hollow rods) up to Øe (de)
  • Applicable
  • UV Rays Resistance
  • 9
  • UV-Sterilization
  • 7

Alternative products

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, vessels for sale greece. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

2 prices for Wolf Kunststoff ZEDEX® ZX-324V2T A3F PEEK, PTFE Modified

Seller from Taipei – 2021-07-23:

Seller from Taipei work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1615 per MT

Seller from Madrid – 2021-04-15:

Seller from Madrid work with company: Solvay, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $2440 per MT

Share on Pinterest
Share on LinkedIn
Share on Reddit

Would you like to sell Wolf Kunststoff ZEDEX® ZX-324V2T A3F PEEK, PTFE Modified?

Plastic warehouse

Find a direct plastic supplier if you're interested in a supplier or Shrine in Singapore open-nearme.com