Wolf Kunststoff ZEDEX® ZX-410 A4A Polymer Alloy

Seller in Alexandria price: $2100 per MT

Wolf Kunststoff ZEDEX® ZX-410 A4A Polymer Alloy in Polymer, Thermoplastic

  • Physical Properties
  • Density
  • 1.33 g/cc
  • Water Absorption
  • 0.60 % @Temperature 23.0 °C
  • Moisture Absorption at Equilibrium
  • 1.4 %
  • Mechanical Properties
  • Hardness, Shore A
  • 98
  • Hardness, Shore D
  • 85
  • Ball Indentation Hardness
  • 159 MPa
  • Tensile Strength at Break
  • 82.0 MPa
  • Tensile Strength
  • 101 MPa
  • Tensile Stress
  • 40.0 MPa @Strain 1.00 %, Time 3.60e+6 sec
  • Tensile Strength, Yield
  • 71.0 MPa
  • Tensile Strength, Yield
  • 101 MPa
  • Elongation at Break
  • 25 %
  • Elongation at Break
  • 25 %
  • Elongation at Yield
  • 1.5 %
  • Elongation at Yield
  • 5.5 %
  • Elongation at Yield
  • 5.5 %
  • Elongation at Yield
  • 7.3 %
  • Tensile Modulus
  • 3.368 GPa
  • Flexural Strength
  • 89.0 MPa
  • Flexural Strength
  • 126 MPa
  • Flexural Modulus
  • 2.90 GPa
  • Compressive Yield Strength
  • 142 MPa
  • Compressive Strength
  • 111 MPa
  • Compressive Strength
  • 54.0 MPa @Time 3.60e+7 sec
  • Compressive Strength
  • 99.0 MPa @Time 360000 sec
  • Compressive Strength
  • 119 MPa @Time 36.0 sec
  • Compressive Strength
  • 135 MPa @Strain 3.50 %
  • Compressive Modulus
  • 4.70 GPa
  • Fatigue Strength
  • 33.0 MPa @# of Cycles 1.00e+6
  • K Factor (ISO)
  • 2.3 µm/km @Temperature 20.0 °C
  • K Factor (ISO)
  • 3.0 µm/km @Temperature 200 °C
  • K Factor (ISO)
  • 3.3 µm/km @Temperature 100 °C
  • K Factor (ISO)
  • 14.9 µm/km @Temperature 240 °C
  • Charpy Impact Unnotched
  • NB
  • Charpy Impact, Notched
  • 1.34 J/cm²
  • Coefficient of Friction, Dynamic
  • 0.16 @Temperature 20.0 °C
  • Coefficient of Friction, Dynamic
  • 0.23 @Temperature 100 °C
  • Coefficient of Friction, Static
  • 0.20 @Temperature 20.0 °C
  • Tensile Creep Modulus, 1000 hours
  • 4015 MPa
  • Limiting Pressure Velocity
  • 0.13333 MPa-m/sec
  • Limiting Pressure Velocity
  • 0.550 MPa-m/sec
  • Limiting Pressure Velocity
  • 0.64383 MPa-m/sec
  • Limiting Pressure Velocity
  • 1.633 MPa-m/sec
  • Compression Set
  • 1.8 %
  • Compression Set
  • 2.7 %
  • Compression Set
  • 28 %
  • Thermal Properties
  • CTE, linear
  • 40.0 µm/m-°C @Temperature <=100 °C
  • CTE, linear
  • 58.0 µm/m-°C @Temperature <=150 °C
  • Specific Heat Capacity
  • 1.85 J/g-°C
  • Thermal Conductivity
  • 0.250 W/m-K
  • Melting Point
  • 320 °C
  • Maximum Service Temperature, Air
  • 150 °C
  • Maximum Service Temperature, Air
  • 180 °C
  • Maximum Service Temperature, Air
  • 200 °C
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 195 °C
  • Glass Transition Temp, Tg
  • 210 °C
  • Flammability, UL94
  • V-0
  • Oxygen Index
  • 47 %
  • Electrical Properties
  • Volume Resistivity
  • >= 1.00e+16 ohm-cm
  • Surface Resistance
  • >= 1.00e+16 ohm
  • Dielectric Constant
  • 3.15 @Frequency 110 Hz
  • Dielectric Strength
  • 30.0 kV/mm
  • Dissipation Factor
  • 0.00050
  • Dissipation Factor
  • 0.055 @Frequency 1.00 Hz
  • Comparative Tracking Index
  • 150 V
  • Descriptive Properties
  • Alignment Adjustment
  • 4
  • Chemical Sterilization
  • 7
  • Color
  • Yellow
  • Creep Resistance
  • 6
  • Dimensional Stability with Thermal Expansion
  • 6
  • Free from Silicon
  • Applicable
  • Gamma-rays Radiation Sterilization
  • 7
  • High Precision Bushings (negative clearance)
  • Applicable
  • Injection Molded Parts
  • Applicable
  • Machined Parts
  • Applicable
  • Moist Heat Sterilization
  • 8
  • Plastic Granules
  • Applicable
  • Resistance Against dust, Dirt, Abrasive Substances
  • 7
  • Resistance Against Hot Water
  • 125
  • Resistance to Chemicals
  • 6
  • Resistant Against Disinfectant
  • Applicable
  • Rods up to Øe (de)
  • Applicable
  • ROHS/WEEE
  • Applicable
  • Sheets up to Maximum Thickness
  • Applicable
  • Sliding Velocity
  • 100
  • Suitable for Outdoor Use
  • 8
  • Tubes (hollow rods) up to Øe (de)
  • Applicable
  • UV Rays Resistance
  • 9
  • UV-Sterilization
  • 10

Alternative products

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, passenger catamarans for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

1 prices for Wolf Kunststoff ZEDEX® ZX-410 A4A Polymer Alloy

Seller from Alexandria – 2021-05-17:

Seller from Alexandria work with company: Solvay, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2100 per MT

Share on Pinterest
Share on LinkedIn
Share on Reddit

Would you like to sell Wolf Kunststoff ZEDEX® ZX-410 A4A Polymer Alloy?

Plastic warehouse

Find a direct plastic supplier if you're interested in a supplier or Process server in Singapore open-nearme.com