Wolf Kunststoff ZEDEX® ZX-410V7T A4T Polymer Alloy, Fiber Reinforced, Friction Modified

Seller in Tianjin price: $1914 per MT
Seller in Los Angeles price: $1730 per MT
Seller in Los Angeles price: $2197 per MT

Wolf Kunststoff ZEDEX® ZX-410V7T A4T Polymer Alloy, Fiber Reinforced, Friction Modified in Polymer, Thermoplastic

  • Physical Properties
  • Density
  • 1.42 g/cc
  • Water Absorption
  • 0.40 % @Temperature 23.0 °C
  • Moisture Absorption at Equilibrium
  • 1.2 %
  • Mechanical Properties
  • Hardness, Shore A
  • >= 100
  • Hardness, Shore D
  • 90
  • Ball Indentation Hardness
  • 146 MPa
  • Tensile Strength at Break
  • 71.0 MPa
  • Tensile Strength
  • 71.0 MPa
  • Tensile Stress
  • 51.0 MPa @Strain 1.00 %, Time 3.60e+6 sec
  • Tensile Strength, Yield
  • 42.4 MPa
  • Elongation at Break
  • 4.5 %
  • Elongation at Break
  • 4.5 %
  • Elongation at Yield
  • 1.8 %
  • Elongation at Yield
  • 4.5 %
  • Elongation at Yield
  • 4.8 %
  • Tensile Modulus
  • 5.499 GPa
  • Flexural Strength
  • 129 MPa
  • Flexural Strength
  • 136.4 MPa
  • Flexural Strength
  • 138 MPa
  • Flexural Modulus
  • 5.545 GPa
  • Compressive Yield Strength
  • 132 MPa
  • Compressive Strength
  • 100 MPa
  • Compressive Strength
  • 133 MPa
  • Compressive Strength
  • 135 MPa
  • Compressive Strength
  • 70.0 MPa @Time 3.60e+7 sec
  • Compressive Strength
  • 96.0 MPa @Time 360000 sec
  • Compressive Strength
  • 108 MPa @Time 36.0 sec
  • Compressive Strength
  • 129 MPa @Strain 3.50 %
  • Compressive Modulus
  • 6.30 GPa
  • Fatigue Strength
  • 59.0 MPa @# of Cycles 1.00e+6
  • K Factor (ISO)
  • 0.20 µm/km @Temperature 20.0 °C
  • K Factor (ISO)
  • 0.90 µm/km @Temperature 100 °C
  • K Factor (ISO)
  • 1.0 µm/km @Temperature 200 °C
  • Charpy Impact Unnotched
  • 3.00 J/cm²
  • Charpy Impact, Notched
  • 1.12 J/cm²
  • Coefficient of Friction, Dynamic
  • 0.16 @Temperature 20.0 °C
  • Coefficient of Friction, Dynamic
  • 0.17 @Temperature 100 °C
  • Coefficient of Friction, Static
  • 0.23 @Temperature 20.0 °C
  • Tensile Creep Modulus, 1000 hours
  • 5260 MPa
  • Limiting Pressure Velocity
  • 0.300 MPa-m/sec
  • Limiting Pressure Velocity
  • 0.500 MPa-m/sec
  • Limiting Pressure Velocity
  • 0.600 MPa-m/sec
  • Limiting Pressure Velocity
  • 1.667 MPa-m/sec
  • Compression Set
  • 2.2 %
  • Compression Set
  • 5.2 %
  • Compression Set
  • 5.2 %
  • Compression Set
  • 39 %
  • Thermal Properties
  • CTE, linear
  • 23.0 µm/m-°C @Temperature <=100 °C
  • CTE, linear
  • 25.0 µm/m-°C @Temperature <=150 °C
  • Specific Heat Capacity
  • 0.870 J/g-°C
  • Melting Point
  • 315 °C
  • Maximum Service Temperature, Air
  • 150 °C
  • Maximum Service Temperature, Air
  • 190 °C
  • Maximum Service Temperature, Air
  • 200 °C
  • Deflection Temperature at 1.8 MPa (264 psi)
  • 206 °C
  • Glass Transition Temp, Tg
  • 211 °C
  • Flammability, UL94
  • V-0
  • Electrical Properties
  • Volume Resistivity
  • 3.60e+6 ohm-cm
  • Surface Resistance
  • 3.00e+6 ohm
  • Dielectric Constant
  • 3.3 @Frequency 110 Hz
  • Dielectric Strength
  • 0.100 kV/mm
  • Dissipation Factor
  • 0.00070
  • Dissipation Factor
  • 0.083 @Frequency 1.00 Hz
  • Descriptive Properties
  • Alignment Adjustment
  • 2
  • Chemical Sterilization
  • 4
  • Color
  • Black
  • Creep Resistance
  • 7
  • Dimensional Stability with Thermal Expansion
  • 9
  • Free from Silicon
  • Applicable
  • Gamma-rays Radiation Sterilization
  • 7
  • Injection Molded Parts
  • Applicable
  • Machined Parts
  • Applicable
  • Moist Heat Sterilization
  • 7
  • Plastic Granules
  • Applicable
  • Resistance Against dust, Dirt, Abrasive Substances
  • 7
  • Resistance Against Hot Water
  • 130
  • Resistance to Chemicals
  • 5
  • Resistant Against Disinfectant
  • Applicable
  • Rods up to Øe (de)
  • Applicable
  • Sheets up to Maximum Thickness
  • Applicable
  • Sliding Velocity
  • 100
  • Suitable for Outdoor Use
  • 8
  • Tubes (hollow rods) up to Øe (de)
  • Applicable
  • UV Rays Resistance
  • 9
  • UV-Sterilization
  • 10

Alternative products

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng carrier for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Wolf Kunststoff ZEDEX® ZX-410V7T A4T Polymer Alloy, Fiber Reinforced, Friction Modified

Seller from Tianjin – 2021-06-22:

Seller from Tianjin work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1914 per MT

Seller from Los Angeles – 2021-06-01:

Seller from Los Angeles work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1730 per MT

Seller from Los Angeles – 2021-04-27:

Seller from Los Angeles work with company: Solvay, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $2197 per MT

Share on Pinterest
Share on LinkedIn
Share on Reddit

Would you like to sell Wolf Kunststoff ZEDEX® ZX-410V7T A4T Polymer Alloy, Fiber Reinforced, Friction Modified?

Plastic warehouse

Find a direct plastic supplier if you're interested in a supplier or Photo shop in Singapore open-nearme.com