$ 1649/MT
- Density: 0.920 g/cc
- Melt Flow: 0.90 g/10 min @Load 2.16 kg, Temperature 190 °C
- Modulus of Elasticity: 0.190 GPa
- Modulus of Elasticity: 0.200 GPa
- Coefficient of Friction: 0.50
$ 1611/MT
- Density: 0.921 g/cc
- Melt Flow: 0.75 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Stress: 16.7 MPa
- Elongation at Break: >= 300 %
- Elongation at Break: >= 450 %
$ 1978/MT
- Density: 0.944 g/cc
- Melt Flow: 0.18 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 5.4 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 58
- Tensile Stress: 36.0 MPa
$ 1805/MT
- Density: 0.921 g/cc
- Melt Flow: 4.7 g/10 min
- Film Tensile Strength at Yield, MD: 12.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Elongation at Break: 100 %
$ 1621/MT
- Viscosity Test: 61 - 63 cm³/g
- Melting Point: 252 - 258 °C
- TiO2: 0.028 - 0.040 %
- Moisture Content: <= 0.25 %
$ 1825/MT
- Density: 0.921 g/cc
- Melt Flow: 1.9 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 11.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Elongation at Break: 100 %
$ 1521/MT
- Density: 0.960 g/cc
- Environmental Stress Crack Resistance: 12 hour
- Melt Flow: 3.6 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore D: 68
- Tensile Strength, Yield: 31.0 MPa
$ 1500/MT
- Density: 0.921 g/cc
- Melt Flow: 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 11.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Elongation at Break: 200 %
$ 1558/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0060 cm/cm
- Melt Flow: 1.1 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 106
- Tensile Strength, Yield: 44.1 MPa
$ 1668/MT
- Density: 0.956 g/cc
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 25 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 59
- Tensile Stress: 31.0 MPa
$ 1844/MT
- Density: 0.956 g/cc
- Melt Flow: 3.3 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 33 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 62
- Tensile Stress: 31.0 MPa
$ 1783/MT
- Density: 0.956 g/cc
- Melt Flow: 2.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 27 g/10 min @Load 21.6 kg, Temperature 190 °C
- Melt Temperature: 200 - 230 °C
- Gel Number: <5
- Gels Size: <150 µm
$ 2383/MT
- Viscosity Test: 78 - 82 cm³/g
- Melting Point: 246 - 250 °C
- Acetaldehyde: <= 1.00 ppm
- Moisture Content: <= 0.30 %
$ 2027/MT
- Density: 0.900 g/cc
- Melt Flow: 0.30 g/10 min
- Hardness, Shore D: 70
- Tensile Stress: 33.0 MPa
- Elongation at Yield: 14 %
$ 1587/MT
- Density: 1.20 g/cc
- Melt Flow: 12.1 - 18 g/10 min @Load 1.20 kg, Temperature 300 °C
- Ball Indentation Hardness: >= 103 MPa
- Tensile Stress: 60.0 - 70.0 MPa
- Tensile Strength, Yield: >= 60.0 MPa
$ 1696/MT
- Volatiles: <= 0.75 %
- Viscosity Measurement: 52
- Viscosity Measurement: <= 84
- Ash: <= 1.5 %
- Tensile Strength: >= 24.5 MPa
$ 1529/MT
- Volatiles: <= 0.75 %
- Viscosity Measurement: 42 - 52
- Viscosity Measurement: <= 62
- Ash: <= 1.5 %
- Tensile Strength: >= 19.6 MPa
$ 1684/MT
- Bulk Density: 0.580 g/cc
- Volatiles: <= 0.20 %
- Viscosity Test: 88 cm³/g
- Ash: <= 0.050 %
- Chlorine, Cl: 56 %
$ 2103/MT
- Viscosity Test: 76 - 80 cm³/g
- Melting Point: 246 - 250 °C
- Acetaldehyde: <= 1.00 ppm
- Moisture Content: <= 0.30 %
$ 1511/MT
- Density: 0.952 g/cc
- Melt Flow: 0.040 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Stress: 38.2 MPa
- Tensile Strength, Yield: 24.5 MPa
- Elongation at Break: >= 500 %
- Melt Temperature: 131 °C
$ 2040/MT
- Density: 0.909 g/cc
- Melt Flow: 2.2 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 9.60 MPa
- Film Tensile Strength at Yield, TD: 8.80 MPa
- Film Elongation at Break, MD: 640 %
$ 1577/MT
- Density: 0.957 g/cc
- Environmental Stress Crack Resistance: 1.5 hour @Pressure 2.50 MPa
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 23 g/10 min @Load 5.00 kg, Temperature 190 °C
- Hardness, Shore D: 64
$ 1460/MT
- Density: 0.900 g/cc
- Melt Flow: 100 g/10 min
- Hardness, Shore D: 72
- Tensile Stress: 30.0 MPa
- Elongation at Yield: 7.0 %
$ 1889/MT
- Density: 0.0200 - 0.0350 g/cc
- Bead Size: 0.500 - 0.700 mm
$ 2304/MT
- Density: 0.900 g/cc
- Melt Flow: 1.8 g/10 min
- Hardness, Shore D: 71
- Tensile Stress: 33.0 MPa
- Elongation at Yield: 13 %
$ 1721/MT
- Density: 0.921 g/cc
- Melt Flow: 0.85 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 11.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Elongation at Break: 200 %
$ 2174/MT
- Density: 0.900 g/cc
- Melt Flow: 12 g/10 min
- Hardness, Shore D: 65
- Tensile Stress: 25.0 MPa
- Elongation at Yield: 14 %
$ 1492/MT
- Density: 0.948 - 0.952 g/cc
- Melt Flow: 25 - 31 g/10 min @Load 5.00 kg, Temperature 190 °C
- Collected Volatile Condensable Material: <= 0.30 %
- Impact: >= 2.5
- Yellow Index: <= 4.0 %
- Contamination: <2 defects in 200 gr of pellets
$ 1900/MT
- Density: 0.957 g/cc
- Melt Flow: 5.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 16.0 MPa
- Tensile Strength, Yield: 30.0 MPa
- Elongation at Break: 200 %
$ 1961/MT
- Density: 0.900 g/cc
- Melt Flow: 1.8 g/10 min
- Hardness, Shore D: 71
- Tensile Stress: 35.0 MPa
- Elongation at Yield: 13 %
$ 2458/MT
- Density: 0.943 g/cc
- Melt Flow: 0.20 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 4.0 g/10 min @Load 21.6 kg, Temperature 190 °C
- Charpy Impact, Notched: 2.50 J/cm²
- Swell Ratio, %: 150
$ 2002/MT
- Density: 0.900 g/cc
- Melt Flow: 2.0 g/10 min
- Hardness, Shore D: 71
- Tensile Stress: 35.0 MPa
- Elongation at Yield: 13 %
$ 1489/MT
- Viscosity Test: 63 - 65 cm³/g
- Melting Point: 252 - 258 °C
- TiO2: 0.028 - 0.040 %
- Moisture Content: <= 0.25 %
$ 1644/MT
- Density: 0.957 g/cc
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 23 g/10 min @Load 5.00 kg, Temperature 190 °C
- Hardness, Shore D: 64
- Tensile Stress: 30.0 MPa
$ 1894/MT
- Density: 0.954 g/cc
- Melt Flow: 3.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 11 g/10 min @Load 5.00 kg, Temperature 190 °C
- Charpy Impact, Notched: 0.400 J/cm²
- Melt Temperature: 200 - 280 °C
$ 1542/MT
- Viscosity Test: >= 84 cm³/g
- Melting Point: 247 - 251 °C
- Acetaldehyde: <= 1.00 ppm
- Moisture Content: <= 0.30 %
$ 1738/MT
- Density: 0.900 g/cc
- Melt Flow: 3.2 g/10 min
- Hardness, Shore D: 71
- Tensile Stress: 34.0 MPa
- Elongation at Yield: 13 %
$ 1884/MT
- Density: 0.952 - 0.956 g/cc
- Melt Flow: 0.70 - 1.3 g/10 min @Load 5.00 kg, Temperature 190 °C
- Collected Volatile Condensable Material: <= 0.30 %
- Impact: >= 6.5
- Yellow Index: <= 4.0 %
$ 1491/MT
- Density: 0.944 g/cc
- Environmental Stress Crack Resistance: 10 hour @Pressure 3.50 MPa
- Melt Flow: 1.1 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 23 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 60
$ 2099/MT
- Density: 0.920 g/cc
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Stress: 15.7 MPa
- Elongation at Break: >= 330 %
- Elongation at Break: >= 600 %
$ 2425/MT
- Density: 0.920 g/cc
- Melt Flow: 0.50 g/10 min
- Film Tensile Strength at Yield, MD: 11.0 MPa
- Film Tensile Strength at Yield, TD: 10.0 MPa
- Film Elongation at Break, MD: 600 %
$ 1752/MT
- Density: 0.916 g/cc
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 11.8 MPa
- Film Tensile Strength at Yield, TD: 10.0 MPa
- Film Elongation at Break, MD: 500 %
$ 1986/MT
- Density: 0.945 g/cc
- Environmental Stress Crack Resistance: 50 hour @Pressure 4.00 MPa
- Melt Flow: 0.45 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 12 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 60
$ 1620/MT
- Viscosity Test: 63 - 65 cm³/g
- Melting Point: 252 - 258 °C
- Moisture Content: <= 0.25 %
$ 2456/MT
- Density: 0.949 g/cc
- Melt Flow: 0.28 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 8.0 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 60
- Tensile Stress: 35.0 MPa
$ 1705/MT
- Density: 1.20 g/cc
- Melt Flow: 59.1 - 70 g/10 min @Load 1.20 kg, Temperature 300 °C
- Ball Indentation Hardness: >= 103 MPa
- Tensile Stress: 55.0 - 70.0 MPa
- Tensile Strength, Yield: >= 60.0 MPa
$ 1636/MT
- Density: 0.924 g/cc
- Melt Flow: 4.7 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 12.0 MPa
- Film Tensile Strength at Yield, TD: 12.0 MPa
- Elongation at Break: 100 %
$ 1504/MT
- Density: 0.0140 - 0.0300 g/cc
- Bead Size: 1.00 - 1.80 mm
$ 1672/MT
- Density: 0.957 g/cc
- Melt Flow: 0.22 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 7.5 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 60
- Tensile Stress: 35.0 MPa
$ 1469/MT
- Density: 0.0180 - 0.0300 g/cc
- Bead Size: 0.700 - 1.00 mm
$ 1986/MT
- Density: 0.900 g/cc
- Melt Flow: 9.0 g/10 min
- Hardness, Shore D: 71
- Tensile Stress: 34.0 MPa
- Elongation at Yield: 13 %
$ 1642/MT
- Density: 0.948 g/cc
- Environmental Stress Crack Resistance: 400 hour @Pressure 4.00 MPa
- Melt Flow: 0.22 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 6.2 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 62
$ 1877/MT
- Density: 0.952 g/cc
- Melt Flow: 0.12 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 2.7 g/10 min @Load 21.6 kg, Temperature 190 °C
- Charpy Impact, Notched: 4.20 J/cm²
- Swell Ratio, %: 145
$ 1977/MT
- Density: 1.20 g/cc
- Melt Flow: 4.1 - 7.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Ball Indentation Hardness: >= 103 MPa
- Tensile Stress: 60.0 - 70.0 MPa
- Tensile Strength, Yield: >= 60.0 MPa
$ 1882/MT
- Density: 1.04 g/cc
- Moisture Absorption: <= 0.100 %
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Tensile Strength at Break: 48.0 MPa
$ 2170/MT
- Density: 1.04 g/cc
- Moisture Absorption: <= 0.100 %
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Tensile Strength at Break: 48.0 MPa
$ 1552/MT
- Density: 1.04 g/cc
- Moisture Absorption: <= 0.100 %
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Tensile Strength at Break: 48.0 MPa
$ 1633/MT
- Density: 1.04 g/cc
- Moisture Absorption: <= 0.100 %
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Tensile Strength at Break: 48.0 MPa
$ 1542/MT
- Density: 1.04 g/cc
- Moisture Absorption: <= 0.100 %
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 2.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Tensile Strength at Break: 48.0 MPa
$ 1574/MT
- Density: 0.0180 - 0.0300 g/cc
- Bead Size: 0.700 - 1.00 mm
$ 1517/MT
- Density: 0.945 g/cc
- Melt Flow: 0.45 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 12 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 60
- Tensile Strength, Yield: 22.0 MPa
$ 1957/MT
- Viscosity Test: 76 - 80 cm³/g
- Melting Point: 246 - 250 °C
- Acetaldehyde: <= 1.00 ppm
- Moisture Content: <= 0.30 %
$ 1917/MT
- Density: 0.952 g/cc
- Melt Flow: 11 g/10 min @Load 2.16 kg, Temperature 190 °C
- Flexural Modulus: 1.32 GPa
- Izod Impact, Notched: 0.320 J/cm
- Vicat Softening Point: 122 °C
$ 1612/MT
- Density: 0.900 g/cc
- Melt Flow: 6.0 g/10 min
- Hardness, Shore D: 65
- Tensile Stress: 25.0 MPa
- Elongation at Yield: 14 %
$ 1482/MT
- Density: 0.942 g/cc
- Melt Flow: 6.5 g/10 min @Load 21.6 kg, Temperature 190 °C
- Tensile Impact Strength: 160 kJ/m² @Temperature -30.0 °C
$ 2469/MT
- Density: 0.944 g/cc
- Melt Flow: 0.31 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 7.5 g/10 min @Load 21.6 kg, Temperature 190 °C
- Charpy Impact, Notched: 1.90 J/cm²
- Swell Ratio, %: 135
$ 1485/MT
- Density: 0.921 g/cc
- Melt Flow: 1.9 g/10 min
- Film Tensile Strength at Yield, MD: 13.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Film Elongation at Break, MD: >= 150 %
$ 2021/MT
- Bulk Density: 0.490 g/cc
- Volatiles: <= 0.20 %
- Viscosity Test: 105 cm³/g
- Ash: <= 0.050 %
- Chlorine, Cl: 56 %
$ 1699/MT
- Density: 1.04 g/cc
- Moisture Absorption: <= 0.100 %
- Linear Mold Shrinkage: 0.0040 - 0.0070 cm/cm
- Melt Flow: 11 g/10 min @Load 5.00 kg, Temperature 200 °C
- Tensile Strength at Break: 45.0 MPa
$ 2355/MT
- Density: 0.921 g/cc
- Melt Flow: 2.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 13.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Elongation at Break: 100 %
$ 2072/MT
- Density: 0.921 g/cc
- Melt Flow: 2.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 13.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Elongation at Break: 100 %
$ 1990/MT
- Density: 0.921 g/cc
- Melt Flow: 2.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 13.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Elongation at Break: 100 %
$ 1959/MT
- Density: 0.921 g/cc
- Melt Flow: 2.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 13.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Elongation at Break: 100 %
$ 1867/MT
- Density: 0.921 g/cc
- Melt Flow: 2.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 13.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Elongation at Break: 100 %
$ 2039/MT
- Density: 0.938 g/cc
- Melt Flow: 20 g/10 min @Load 21.6 kg, Temperature 190 °C
- Tensile Strength, Yield: 20.0 MPa
- Elongation at Yield: 10 %
- Tensile Modulus: 0.650 GPa
$ 2162/MT
- Density: 0.900 g/cc
- Melt Flow: 10 g/10 min
- Hardness, Shore D: 66
- Tensile Stress: 28.0 MPa
- Elongation at Yield: 14 %
$ 1567/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0060 cm/cm
- Melt Flow: 0.50 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 104
- Tensile Strength, Yield: 45.1 MPa
$ 1507/MT
- Density: 1.20 g/cc
- Melt Flow: 18.1 - 22 g/10 min @Load 1.20 kg, Temperature 300 °C
- Ball Indentation Hardness: >= 103 MPa
- Tensile Stress: 60.0 - 70.0 MPa
- Tensile Strength, Yield: >= 60.0 MPa
$ 1536/MT
- Viscosity Test: 80 - 84 cm³/g
- Melting Point: 247 - 251 °C
- Acetaldehyde: <= 1.00 ppm
- Moisture Content: <= 0.30 %
$ 1633/MT
- Density: 0.921 g/cc
- Melt Flow: 0.85 g/10 min
- Film Tensile Strength at Yield, MD: 12.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Film Elongation at Break, MD: >= 200 %
$ 1741/MT
- Density: 0.959 g/cc
- Environmental Stress Crack Resistance: 3.0 hour @Pressure 3.50 MPa
- Melt Flow: 1.5 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 2.7 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 63
$ 2211/MT
- Density: 0.944 g/cc
- Melt Flow: 1.6 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 22 g/10 min @Load 21.6 kg, Temperature 190 °C
- Melt Temperature: 200 - 230 °C
- Gel Number: <4
- Gels Size: <150 µm
$ 2328/MT
- Density: 1.20 g/cc
- Melt Flow: 1.0 - 4.0 g/10 min @Load 1.20 kg, Temperature 300 °C
- Ball Indentation Hardness: >= 103 MPa
- Tensile Stress: 60.0 - 70.0 MPa
- Tensile Strength, Yield: >= 60.0 MPa
$ 1612/MT
- Density: 0.900 g/cc
- Melt Flow: 0.40 g/10 min
- Hardness, Shore D: 60
- Tensile Stress: 26.0 MPa
- Elongation at Yield: 16 %
$ 1465/MT
- Density: 1.20 g/cc
- Melt Flow: 38.1 - 59 g/10 min @Load 1.20 kg, Temperature 300 °C
- Ball Indentation Hardness: >= 103 MPa
- Tensile Stress: 55.0 - 70.0 MPa
- Tensile Strength, Yield: >= 60.0 MPa
$ 1528/MT
- Density: 0.0220 - 0.0500 g/cc
- Bead Size: 0.300 - 0.500 mm
$ 1622/MT
- Density: 0.952 g/cc
- Environmental Stress Crack Resistance: 5.0 hour @Pressure 3.50 MPa
- Melt Flow: 0.35 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 9.5 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 62
$ 2012/MT
- Density: 0.950 g/cc
- Environmental Stress Crack Resistance: 30 hour
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore D: 65
- Tensile Strength, Yield: 27.0 MPa
$ 2312/MT
- Density: 0.952 g/cc
- Melt Flow: 0.35 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 8.5 g/10 min @Load 21.6 kg, Temperature 190 °C
- Charpy Impact, Notched: 2.50 J/cm²
- Swell Ratio, %: 140
$ 2506/MT
- Viscosity Test: 63 - 65 cm³/g
- Melting Point: 252 - 258 °C
- Moisture Content: <= 0.25 %
$ 1625/MT
- Density: 1.20 g/cc
- Melt Flow: 7.0 - 12 g/10 min @Load 1.20 kg, Temperature 300 °C
- Ball Indentation Hardness: >= 103 MPa
- Tensile Stress: 60.0 - 70.0 MPa
- Tensile Strength, Yield: >= 60.0 MPa
$ 1857/MT
- Density: 0.924 g/cc
- Melt Flow: 4.7 g/10 min
- Film Tensile Strength at Yield, MD: 13.0 MPa
- Film Tensile Strength at Yield, TD: 13.0 MPa
- Film Elongation at Break, MD: 100 %
$ 1649/MT
- Bulk Density: 0.600 g/cc
- Volatiles: <= 0.20 %
- Viscosity Test: 105 cm³/g
- Ash: <= 0.050 %
- Chlorine, Cl: 56 %
$ 2214/MT
- Density: 0.944 g/cc
- Melt Flow: 1.8 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 27 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 58
- Tensile Stress: 32.0 MPa
$ 1797/MT
- Density: 0.900 g/cc
- Melt Flow: 0.40 g/10 min
- Hardness, Shore D: 60
- Tensile Stress: 22.0 MPa
- Elongation at Yield: 11 %
$ 1453/MT
- Viscosity Test: 78 - 82 cm³/g
- Melting Point: 247 - 251 °C
- Acetaldehyde: <= 1.00 ppm
- Moisture Content: <= 0.30 %
$ 1936/MT
- Density: 0.951 - 0.955 g/cc
- Viscosity Measurement: 350 - 410
- Melt Flow: 0.23 - 0.33 g/10 min @Load 5.00 kg, Temperature 190 °C
- Collected Volatile Condensable Material: <= 0.30 %
- Impact: >= 12
$ 2263/MT
- Density: 0.921 g/cc
- Melt Flow: 0.90 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Temperature: 225 °C
$ 1873/MT
- Density: 0.955 g/cc
- Melt Flow: 0.40 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 10 g/10 min @Load 21.6 kg, Temperature 190 °C
- Tensile Strength, Yield: 28.0 MPa
- Elongation at Yield: 8.0 %
$ 1750/MT
- Density: 0.922 g/cc
- Melt Flow: 0.95 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 13.0 MPa
- Film Tensile Strength at Yield, TD: 12.5 MPa
- Film Elongation at Break, MD: 680 %
$ 2215/MT
- Density: 0.900 g/cc
- Melt Flow: 16 g/10 min
- Tensile Stress: 30.0 MPa
- Elongation at Yield: 12 %
- Flexural Modulus: 1.55 GPa
$ 1533/MT
- Moisture Absorption: <= 0.100 %
- Melt Flow: 4.5 g/10 min @Load 5.00 kg, Temperature 200 °C
- Tensile Strength at Break: 20.0 MPa
- Tensile Strength, Yield: 21.0 MPa
- Elongation at Break: 55 %
$ 1571/MT
- Density: 0.938 g/cc
- Environmental Stress Crack Resistance: 400 hour
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore D: 65
- Tensile Strength, Yield: 15.0 MPa
$ 2486/MT
- Density: 0.0130 - 0.0250 g/cc
- Bead Size: 1.80 - 2.50 mm
$ 1444/MT
- Density: 0.921 g/cc
- Melt Flow: 0.30 g/10 min
- Film Tensile Strength at Yield, MD: 12.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Film Elongation at Break, MD: >= 200 %
$ 1876/MT
- Density: 0.952 g/cc
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 190 °C
- Flexural Modulus: 1.35 GPa
- Izod Impact, Notched: 0.250 J/cm
- Vicat Softening Point: 122 °C
$ 1795/MT
- Density: 0.923 g/cc
- Melt Flow: 0.70 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 12.0 MPa
- Film Tensile Strength at Yield, TD: 15.0 MPa
- Film Elongation at Break, MD: 600 %
$ 1807/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0030 - 0.0060 cm/cm
- Melt Flow: 1.7 g/10 min @Load 5.00 kg, Temperature 200 °C
- Hardness, Rockwell R: 104
- Tensile Strength, Yield: 43.1 MPa
$ 1867/MT
- Viscosity Test: 63 - 65 cm³/g
- Melting Point: 252 - 258 °C
- TiO2: 0.028 - 0.040 %
- Moisture Content: <= 0.25 %
$ 1523/MT
- Density: 0.900 g/cc
- Melt Flow: 1.3 g/10 min
- Hardness, Shore D: 64
- Tensile Stress: 27.0 MPa
- Elongation at Yield: 13 %
$ 2525/MT
- Density: 0.955 - 0.959 g/cc
- Melt Flow: 21 - 25 g/10 min @Load 5.00 kg, Temperature 190 °C
- Collected Volatile Condensable Material: <= 0.30 %
- Impact: >= 2.7
- Yellow Index: <= 4.0 %
- Contamination: <2 defects in 200 gr of pellets
$ 1897/MT
- Melt Flow: 0.22 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 1.0 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 20 g/10 min @Load 21.6 kg, Temperature 190 °C
- Tensile Strength, Yield: 25.0 MPa
- Elongation at Yield: 9.0 %
$ 2169/MT
- Density: 0.920 g/cc
- Melt Flow: 2.3 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 10.0 MPa
- Film Tensile Strength at Yield, TD: 11.0 MPa
- Film Elongation at Break, MD: 1000 %
$ 2238/MT
- Density: 0.958 g/cc
- Melt Flow: 7.5 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: 13.0 MPa
- Tensile Strength, Yield: 30.0 MPa
- Elongation at Break: 350 %
$ 1545/MT
- Density: 0.900 g/cc
- Melt Flow: 9.0 g/10 min
- Hardness, Shore D: 71
- Tensile Stress: 34.0 MPa
- Elongation at Yield: 13 %
$ 1832/MT
- Viscosity Test: 70 - 76 cm³/g
- Melting Point: 252 - 258 °C
- Acetaldehyde: <= 1.00 ppm
- Moisture Content: <= 0.25 %
$ 1578/MT
- Density: 0.952 - 0.956 g/cc
- Melt Flow: 10 - 12 g/10 min @Load 5.00 kg, Temperature 190 °C
- Collected Volatile Condensable Material: <= 0.30 %
- Impact: >= 4.5
- Yellow Index: <= 4.0 %
- Contamination: <2 defects in 200 gr of pellets
$ 1700/MT
- Density: 0.900 g/cc
- Melt Flow: 8.0 g/10 min
- Hardness, Shore D: 67
- Tensile Stress: 28.0 MPa
- Elongation at Yield: 14 %
$ 1895/MT
- Density: 0.912 g/cc
- Melt Flow: 0.60 g/10 min @Load 2.16 kg, Temperature 190 °C
- Film Tensile Strength at Yield, MD: 11.5 MPa
- Film Tensile Strength at Yield, TD: 11.2 MPa
- Film Elongation at Break, MD: 600 %
$ 1545/MT
- Density: 0.900 g/cc
- Melt Flow: 21 g/10 min
- Tensile Stress: 27.0 MPa
- Elongation at Yield: 8.0 %
- Flexural Modulus: 1.50 GPa
$ 1449/MT
- Density: 0.900 g/cc
- Melt Flow: 25 g/10 min
- Hardness, Shore D: 72
- Tensile Stress: 35.0 MPa
- Elongation at Yield: 13 %
$ 1584/MT
- Density: 0.954 g/cc
- Environmental Stress Crack Resistance: 5.0 hour @Pressure 3.50 MPa
- Melt Flow: 1.2 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 23 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 62
$ 1931/MT
- Density: 0.952 g/cc
- Melt Flow: 28 g/10 min @Load 2.16 kg, Temperature 190 °C
- Flexural Modulus: 1.38 GPa
- Izod Impact, Notched: 0.210 J/cm
- Vicat Softening Point: 120 °C
$ 2090/MT
- Density: 0.956 g/cc
- Melt Flow: 0.28 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 8.0 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 61
- Tensile Stress: 35.0 MPa
$ 1991/MT
- Viscosity Test: 82 - 86 cm³/g
- Melting Point: 246 - 250 °C
- Acetaldehyde: <= 1.00 ppm
- Moisture Content: <= 0.30 %
$ 1766/MT
- Density: 0.920 g/cc
- Melt Flow: 2.2 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Stress: 10.0 MPa
- Tensile Stress: 11.0 MPa
- Film Elongation at Break, MD: 600 %
$ 1638/MT
- Density: 0.950 g/cc
- Melt Flow: 0.10 g/10 min @Load 5.00 kg, Temperature 190 °C
- Melt Flow: 2.2 g/10 min @Load 21.6 kg, Temperature 190 °C
- Charpy Impact, Notched: 4.50 J/cm²
- Swell Ratio, %: 145
$ 1739/MT
- Density: 0.0200 - 0.0350 g/cc
- Bead Size: 0.500 - 0.700 mm
$ 1454/MT
- Density: 0.900 g/cc
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Rockwell R: 100
- Tensile Stress: 32.0 MPa
- Elongation at Yield: 13 %
$ 2230/MT
- Density: 0.925 g/cc
- Melt Flow: 0.75 g/10 min
- Film Tensile Strength at Yield, MD: 12.0 MPa
- Film Tensile Strength at Yield, TD: 12.0 MPa
- Film Elongation at Break, MD: >= 200 %
$ 1744/MT
- Density: 0.959 g/cc
- Volatiles: <= 0.050 %
- Environmental Stress Crack Resistance: 15 hour
- Melt Flow: 0.35 g/10 min @Load 2.16 kg, Temperature 190 °C
- Ash: <= 0.060 %
$ 1740/MT
- Density: 0.950 g/cc
- Environmental Stress Crack Resistance: 1.0 hour @Pressure 2.50 MPa
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 28 g/10 min @Load 5.00 kg, Temperature 190 °C
- Hardness, Shore D: 61
$ 1555/MT
- Density: 0.933 g/cc
- Melt Flow: 0.10 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 12.5 g/10 min @Load 21.6 kg, Temperature 190 °C
- Film Elongation at Break, MD: 600 %
- Film Elongation at Break, TD: 600 %
$ 1684/MT
- Density: 0.957 g/cc
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 52 g/10 min @Load 5.00 kg, Temperature 190 °C
- Charpy Impact, Notched: 0.200 J/cm²
- Melt Temperature: 200 - 280 °C
$ 2455/MT
- Density: 0.0220 - 0.0500 g/cc
- Bead Size: 0.300 - 0.500 mm
$ 1943/MT
- Density: 0.952 g/cc
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 52 g/10 min @Load 5.00 kg, Temperature 190 °C
- Hardness, Shore D: 65
- Tensile Strength, Yield: 20.0 MPa
$ 2256/MT
- Density: 0.952 g/cc
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 52 g/10 min @Load 5.00 kg, Temperature 190 °C
- Hardness, Shore D: 65
- Tensile Strength, Yield: 20.0 MPa
$ 1601/MT
- Density: 0.937 g/cc
- Melt Flow: 0.10 g/10 min @Load 2.16 kg, Temperature 190 °C
- Melt Flow: 13 g/10 min @Load 21.6 kg, Temperature 190 °C
- Film Elongation at Break, MD: 550 %
- Film Elongation at Break, TD: 650 %
$ 1562/MT
- Density: 1.20 g/cc
- Melt Flow: 30.1 - 38 g/10 min @Load 1.20 kg, Temperature 300 °C
- Ball Indentation Hardness: >= 103 MPa
- Tensile Stress: 55.0 - 70.0 MPa
- Tensile Strength, Yield: >= 60.0 MPa
$ 2491/MT
- Density: 0.900 g/cc
- Melt Flow: 3.5 g/10 min
- Hardness, Shore D: 66
- Tensile Stress: 26.0 MPa
- Elongation at Yield: 10 %
$ 1852/MT
- Density: 0.900 g/cc
- Melt Flow: 6.0 g/10 min
- Hardness, Shore D: 71
- Tensile Stress: 34.0 MPa
- Elongation at Yield: 13 %
$ 1658/MT
- Density: 0.944 - 0.948 g/cc
- Melt Flow: 0.70 - 1.3 g/10 min @Load 5.00 kg, Temperature 190 °C
- Collected Volatile Condensable Material: <= 0.30 %
- Impact: >= 7.0
- Yellow Index: <= 4.0 %
$ 2124/MT
- Density: 0.942 - 0.946 g/cc
- Viscosity Measurement: >= 280
- Melt Flow: 0.40 - 0.70 g/10 min @Load 5.00 kg, Temperature 190 °C
- Collected Volatile Condensable Material: <= 0.30 %
- Impact: >= 9.0
Delivery Thermoplastic Iran Petrochemical Commercial Co. (PCC)
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ships sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
