$ 2224/MT
- Density: 1.46 g/cc
- Viscosity Measurement: 0.56 - 0.73
- Linear Mold Shrinkage: 0.0056 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0073 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1932/MT
- Density: 1.07 g/cc
- Melt Flow: 117 g/10 min @Load 5.00 kg, Temperature 275 °C
- Tensile Strength at Break: 50.0 MPa
- Elongation at Break: 6.0 %
- Tensile Modulus: 1.90 GPa
$ 1654/MT
- Density: 1.32 g/cc
- Viscosity Measurement: 1.22 - 1.45
- Linear Mold Shrinkage: 0.0122 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0145 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1852/MT
- Density: 1.35 g/cc
- Viscosity Measurement: 0.52 - 1.44
- Linear Mold Shrinkage: 0.0052 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0144 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1457/MT
- Density: 1.55 g/cc
- Viscosity Measurement: 0.40 - 0.53
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0053 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2582/MT
- Density: 1.30 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 125 MPa
$ 1472/MT
- Density: 1.58 g/cc
- Linear Mold Shrinkage: 0.0034 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0068 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 250 MPa
$ 1741/MT
- Density: 1.06 g/cc
- Viscosity Measurement: 2.07 - 2.11
- Linear Mold Shrinkage: 0.0211 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0207 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1637/MT
- Density: 0.950 g/cc
- Linear Mold Shrinkage: 0.021 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0194 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 35.0 MPa
$ 1688/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 40 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 55.0 MPa
$ 1484/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.0252 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0263 cm/cm
- Melt Flow: 11 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 18.0 MPa
$ 1738/MT
- Density: 1.38 g/cc
- Linear Mold Shrinkage: 0.0099 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0133 cm/cm
- Melt Flow: 20 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 87.0 MPa
$ 1910/MT
- Density: 1.36 g/cc
- Filler Content: 15 %
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1830/MT
- Density: 1.68 g/cc
- Linear Mold Shrinkage: 0.0092 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0168 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 110 MPa
$ 1764/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0083 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0072 cm/cm
- Melt Flow: 12 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 31.0 MPa
$ 1465/MT
- Density: 1.71 g/cc
- Filler Content: 65 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0030 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1781/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm
- Melt Flow: 4.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 30.0 MPa
$ 1751/MT
- Density: 1.58 g/cc
- Viscosity Measurement: 0.40 - 0.88
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0088 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1826/MT
- Density: 1.49 g/cc
- Linear Mold Shrinkage: 0.0048 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0085 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 150 MPa
$ 1706/MT
- Density: 1.73 g/cc
- Linear Mold Shrinkage: 0.0111 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0168 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 130 MPa
$ 2553/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage: 0.0078 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0093 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 115 MPa
$ 1615/MT
- Density: 0.915 g/cc
- Linear Mold Shrinkage: 0.021 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0194 cm/cm
- Melt Flow: 0.50 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 25.0 MPa
$ 1855/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.0178 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0191 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 1562/MT
- Density: 1.43 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 275 °C
$ 1679/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage: 0.0212 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0196 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 30.0 MPa
$ 1903/MT
- Density: 1.36 g/cc
- Viscosity Measurement: 0.85 - 1.45
- Linear Mold Shrinkage: 0.0085 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0145 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1503/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.019 cm/cm
- Melt Flow: 12 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 65.0 MPa
$ 2052/MT
- Density: 0.880 g/cc
- Melt Flow: 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 17.0 MPa
- Elongation at Break: 80 %
- Tensile Modulus: 0.750 GPa
$ 1724/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.0168 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0175 cm/cm
- Melt Flow: 15 - 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 20.0 MPa
$ 1709/MT
- Density: 0.903 g/cc
- Linear Mold Shrinkage: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.025 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 1576/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 40 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 55.0 MPa
$ 1680/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0065 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0128 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 100 MPa
$ 1849/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0176 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0188 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 26.0 MPa
$ 2579/MT
- Density: 1.50 g/cc
- Viscosity Measurement: 0.56 - 0.93
- Linear Mold Shrinkage: 0.0056 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0093 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1955/MT
- Density: 1.13 g/cc
- Melt Flow: 4.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 2.70 GPa
$ 2347/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.0181 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 25 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 34.0 MPa
$ 1640/MT
- Density: 1.005 g/cc
- Linear Mold Shrinkage: 0.0183 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0145 cm/cm
- Melt Flow: 15 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 30.0 MPa
$ 1446/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage: 0.0126 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0105 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
$ 1524/MT
- Density: 1.37 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Melt Flow: 5.0 g/10 min @Load 5.00 kg, Temperature 275 °C
$ 2044/MT
- Density: 1.58 g/cc
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 170 MPa
$ 2107/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0106 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 170 MPa
$ 1678/MT
- Density: 1.13 g/cc
- Melt Flow: 6.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.50 GPa
$ 1770/MT
- Density: 1.47 g/cc
- Viscosity Measurement: 1.27 - 1.33
- Linear Mold Shrinkage: 0.0133 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0127 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1830/MT
- Density: 0.990 g/cc
- Linear Mold Shrinkage: 0.0218 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0197 cm/cm
- Melt Flow: 25 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 25.0 MPa
$ 2076/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage: 0.0082 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0077 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 100 MPa
$ 1448/MT
- Density: 1.23 g/cc
- Viscosity Measurement: 0.80 - 1.2
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1988/MT
- Density: 1.07 g/cc
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 60.0 MPa
- Elongation at Break: 4.0 %
- Tensile Modulus: 1.45 GPa
$ 1848/MT
- Density: 1.20 g/cc
- Viscosity Measurement: 0.63 - 1.42
- Linear Mold Shrinkage: 0.0063 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0142 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1760/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.021 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0198 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 30.0 MPa
$ 1903/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0072 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0085 cm/cm
- Melt Flow: 4.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 85.0 MPa
$ 1480/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 85.0 MPa
$ 1713/MT
- Density: 1.66 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0073 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 130 MPa
$ 2192/MT
- Density: 1.34 g/cc
- Viscosity Measurement: 0.52 - 0.97
- Linear Mold Shrinkage: 0.0052 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0097 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2174/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 70.0 MPa
$ 1865/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0136 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0156 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 25.0 MPa
$ 1698/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0131 cm/cm
- Melt Flow: 22 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 15.0 MPa
$ 2287/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage: 0.0085 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0127 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 125 MPa
$ 2519/MT
- Density: 1.13 g/cc
- Melt Flow: 6.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.50 GPa
$ 1904/MT
- Density: 1.13 g/cc
- Melt Flow: 6.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.50 GPa
$ 2333/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 37.0 MPa
$ 1785/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0083 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0072 cm/cm
- Melt Flow: 12 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 31.0 MPa
$ 2141/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0102 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0103 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 15.0 MPa
$ 1626/MT
- Density: 1.13 g/cc
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.00 GPa
$ 1486/MT
- Density: 1.13 g/cc
- Viscosity Measurement: 1.41 - 1.5
- Linear Mold Shrinkage: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0141 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1675/MT
- Density: 1.13 g/cc
- Viscosity Measurement: 1.8 - 1.83
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 22 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1623/MT
- Density: 1.13 g/cc
- Viscosity Measurement: 1.44
- Linear Mold Shrinkage: 0.0144 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0144 cm/cm
- Melt Flow: 6.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2019/MT
- Density: 1.22 g/cc
- Viscosity Measurement: 0.68 - 1.39
- Linear Mold Shrinkage: 0.0068 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0139 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1662/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 85.0 MPa
$ 1627/MT
- Density: 1.16 g/cc
- Viscosity Measurement: 0.87 - 1.24
- Linear Mold Shrinkage: 0.0124 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0087 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1711/MT
- Density: 1.14 g/cc
- Viscosity Measurement: 1.15 - 1.43
- Linear Mold Shrinkage: 0.0143 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0115 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1763/MT
- Density: 1.15 g/cc
- Viscosity Measurement: 1.11 - 1.15
- Linear Mold Shrinkage: 0.0115 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0111 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1688/MT
- Density: 1.33 g/cc
- Viscosity Measurement: 1.45 - 1.63
- Linear Mold Shrinkage: 0.0145 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0163 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1688/MT
- Density: 1.37 g/cc
- Viscosity Measurement: 0.63 - 1.41
- Linear Mold Shrinkage: 0.0063 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0141 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2024/MT
- Density: 1.23 g/cc
- Viscosity Measurement: 0.67 - 1.58
- Linear Mold Shrinkage: 0.0067 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0158 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1570/MT
- Density: 1.17 g/cc
- Viscosity Measurement: 0.74 - 1.65
- Linear Mold Shrinkage: 0.0074 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0165 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1843/MT
- Density: 1.17 g/cc
- Viscosity Measurement: 0.74 - 1.65
- Linear Mold Shrinkage: 0.0074 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0165 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1861/MT
- Density: 1.29 g/cc
- Viscosity Measurement: 0.71 - 0.83
- Linear Mold Shrinkage: 0.0071 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0083 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1943/MT
- Density: 1.48 g/cc
- Viscosity Measurement: 0.64 - 0.71
- Linear Mold Shrinkage: 0.0064 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0071 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1650/MT
- Density: 1.48 g/cc
- Viscosity Measurement: 0.64 - 0.71
- Linear Mold Shrinkage: 0.0064 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0074 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1471/MT
- Density: 1.30 g/cc
- Viscosity Measurement: 0.63 - 0.81
- Linear Mold Shrinkage: 0.0063 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0081 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1689/MT
- Density: 1.17 g/cc
- Viscosity Measurement: 1.03 - 1.97
- Linear Mold Shrinkage: 0.0103 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0197 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1822/MT
- Density: 1.24 g/cc
- Viscosity Measurement: 1.54 - 1.65
- Linear Mold Shrinkage: 0.0154 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0165 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1521/MT
- Density: 1.24 g/cc
- Viscosity Measurement: 1.54 - 1.62
- Linear Mold Shrinkage: 0.0154 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0162 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1765/MT
- Density: 1.28 g/cc
- Viscosity Measurement: 0.68 - 1.39
- Linear Mold Shrinkage: 0.0068 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0139 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2256/MT
- Density: 1.43 g/cc
- Viscosity Measurement: 0.69 - 0.78
- Linear Mold Shrinkage: 0.0069 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0078 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2497/MT
- Density: 1.30 g/cc
- Viscosity Measurement: 0.50 - 1.38
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0138 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1806/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 150 MPa
$ 1987/MT
- Density: 1.41 g/cc
- Viscosity Measurement: 0.65 - 0.71
- Linear Mold Shrinkage: 0.0065 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0071 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1759/MT
- Density: 1.33 g/cc
- Viscosity Measurement: 0.58 - 1.54
- Linear Mold Shrinkage: 0.0058 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0154 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2161/MT
- Density: 1.35 g/cc
- Viscosity Measurement: 0.60 - 1.0
- Linear Mold Shrinkage: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1852/MT
- Density: 1.55 g/cc
- Viscosity Measurement: 0.40 - 1.2
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1512/MT
- Density: 1.55 g/cc
- Viscosity Measurement: 0.40 - 1.2
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1669/MT
- Density: 1.71 g/cc
- Viscosity Measurement: 0.27 - 0.41
- Linear Mold Shrinkage: 0.0027 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0041 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1530/MT
- Density: 1.71 g/cc
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0030 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 270 MPa
$ 1507/MT
- Density: 1.21 g/cc
- Viscosity Measurement: 0.93 - 1.12
- Linear Mold Shrinkage: 0.0093 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0112 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2426/MT
- Density: 1.28 g/cc
- Viscosity Measurement: 0.30 - 0.53
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0053 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1955/MT
- Density: 1.12 g/cc
- Viscosity Measurement: 1.8 - 1.83
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 6.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1604/MT
- Density: 1.25 g/cc
- Viscosity Measurement: 0.75 - 0.80
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0075 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1563/MT
- Density: 1.16 g/cc
- Viscosity Measurement: 0.87 - 1.24
- Linear Mold Shrinkage: 0.0124 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0087 cm/cm
- Melt Flow: 10 - 22 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1463/MT
- Density: 1.33 g/cc
- Viscosity Measurement: 1.45 - 1.63
- Linear Mold Shrinkage: 0.0145 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0163 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1991/MT
- Density: 1.34 g/cc
- Viscosity Measurement: 1.434 - 1.97
- Linear Mold Shrinkage: 0.01434 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0197 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2174/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.019 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 85.0 MPa
$ 1797/MT
- Density: 1.55 g/cc
- Viscosity Measurement: 0.40 - 1.2
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1559/MT
- Density: 1.32 g/cc
- Viscosity Measurement: 0.84 - 1.22
- Linear Mold Shrinkage: 0.0084 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0122 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1553/MT
- Density: 1.25 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0136 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0156 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1616/MT
- Density: 0.930 g/cc
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 20.0 MPa
- Elongation at Break: 400 %
- Melting Point: 120 °C
$ 1767/MT
- Density: 1.13 g/cc
- Melt Flow: 4.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 2.5 %
- Tensile Modulus: 2.70 GPa
$ 1958/MT
- Density: 1.01 g/cc
- Linear Mold Shrinkage: 0.0231 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0252 cm/cm
- Melt Flow: 15 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 18.0 MPa
$ 1447/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage: 0.0202 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0211 cm/cm
- Melt Flow: 20 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 20.0 MPa
$ 2518/MT
- Density: 1.39 g/cc
- Viscosity Measurement: 0.73 - 1.11
- Linear Mold Shrinkage: 0.0073 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0111 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1652/MT
- Density: 1.63 g/cc
- Viscosity Measurement: 97
- Linear Mold Shrinkage: 0.0061 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0067 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 1888/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0198 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0206 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 75.0 MPa
$ 1641/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0083 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0072 cm/cm
- Melt Flow: 17 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 31.0 MPa
$ 2480/MT
- Density: 1.32 g/cc
- Viscosity Measurement: 0.54 - 0.66
- Linear Mold Shrinkage: 0.0054 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0066 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1625/MT
- Density: 1.36 g/cc
- Viscosity Measurement: 0.74 - 0.82
- Linear Mold Shrinkage: 0.0074 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0082 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1587/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0199 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0202 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 30.0 MPa
$ 1998/MT
- Density: 1.13 g/cc
- Melt Flow: 6.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.50 GPa
$ 1928/MT
- Density: 1.13 g/cc
- Melt Flow: 6.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.50 GPa
$ 1471/MT
- Density: 1.19 g/cc
- Viscosity Measurement: 0.80 - 1.2
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1700/MT
- Density: 1.32 g/cc
- Viscosity Measurement: 0.19 - 0.79
- Linear Mold Shrinkage: 0.0079 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0019 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1972/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage: 0.0135 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0056 cm/cm
- Melt Flow: 20 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 15.0 MPa
$ 1550/MT
- Density: 0.880 g/cc
- Linear Mold Shrinkage: 0.0184 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0191 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 18.0 MPa
$ 2159/MT
- Density: 1.23 g/cc
- Viscosity Measurement: 0.80 - 1.2
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1592/MT
- Density: 1.37 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1733/MT
- Density: 1.22 g/cc
- Viscosity Measurement: 1.34 - 1.37
- Linear Mold Shrinkage: 0.0134 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0137 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1896/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage: 0.0056 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0167 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 120 MPa
$ 2160/MT
- Density: 1.42 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1638/MT
- Density: 1.50 g/cc
- Linear Mold Shrinkage: 0.0148 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0141 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 210 MPa
$ 1533/MT
- Density: 1.58 g/cc
- Viscosity Measurement: 0.52 - 0.62
- Linear Mold Shrinkage: 0.0052 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0062 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1811/MT
- Density: 1.55 g/cc
- Viscosity Measurement: 0.56 - 0.93
- Linear Mold Shrinkage: 0.0056 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0093 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1547/MT
- Density: 0.880 g/cc
- Linear Mold Shrinkage: 0.019 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0195 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 1765/MT
- Density: 1.29 g/cc
- Viscosity Measurement: 0.36 - 1.12
- Linear Mold Shrinkage: 0.0036 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0112 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2155/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 30.0 MPa
$ 1924/MT
- Density: 1.52 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 250 °C
$ 1821/MT
- Density: 1.01 g/cc
- Linear Mold Shrinkage: 0.0114 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 12 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 27.0 MPa
$ 1613/MT
- Density: 1.09 g/cc
- Linear Mold Shrinkage: 0.0235 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0241 cm/cm
- Melt Flow: 20 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 22.0 MPa
$ 1534/MT
- Density: 1.22 g/cc
- Linear Mold Shrinkage: 0.0079 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0019 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 230 MPa
$ 2056/MT
- Density: 1.23 g/cc
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 130 MPa
$ 2367/MT
- Density: 1.71 g/cc
- Viscosity Measurement: 97
- Linear Mold Shrinkage: 0.0055 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0061 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1582/MT
- Density: 1.36 g/cc
- Filler Content: 15 %
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1552/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0169 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0146 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 35.0 MPa
$ 1672/MT
- Density: 1.10 g/cc
- Viscosity Measurement: 1.95 - 1.97
- Linear Mold Shrinkage: 0.0197 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0195 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2167/MT
- Density: 1.16 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0075 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0087 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2129/MT
- Density: 1.23 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 275 °C
$ 1900/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage: 0.0074 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0115 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 165 MPa
$ 1570/MT
- Density: 1.31 g/cc
- Tensile Strength at Break: 50.0 MPa
- Tensile Modulus: 2.00 GPa
- Flexural Strength: 85.0 MPa
- Flexural Modulus: 2.00 GPa
$ 1507/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0226 cm/cm
- Linear Mold Shrinkage, Transverse: 0.021 cm/cm
- Melt Flow: 6.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 30.0 MPa
$ 2028/MT
- Density: 1.48 g/cc
- Viscosity Measurement: 0.52 - 0.62
- Linear Mold Shrinkage: 0.0052 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0062 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2576/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0127 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0126 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 30.0 MPa
$ 2361/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0177 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 1654/MT
- Density: 2.04 g/cc
- Linear Mold Shrinkage: 0.0032 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0046 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 27.0 MPa
$ 1768/MT
- Density: 1.29 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 275 °C
$ 1545/MT
- Density: 1.16 g/cc
- Viscosity Measurement: 1.8 - 1.93
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 4.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2458/MT
- Density: 1.05 g/cc
- Melt Flow: 1.0 - 2.5 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 17.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 1.50 GPa
$ 1685/MT
- Density: 1.13 g/cc
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.50 GPa
$ 1622/MT
- Density: 1.38 g/cc
- Viscosity Measurement: 0.98 - 1.12
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0098 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1710/MT
- Density: 1.13 g/cc
- Viscosity Measurement: 1.8 - 1.93
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 4.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1973/MT
- Density: 1.50 g/cc
- Viscosity Measurement: 0.74 - 0.82
- Linear Mold Shrinkage: 0.0074 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0082 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2316/MT
- Density: 1.11 g/cc
- Viscosity Measurement: 2.04 - 2.08
- Linear Mold Shrinkage: 0.0208 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0204 cm/cm
- Melt Flow: 4.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1557/MT
- Density: 1.63 g/cc
- Linear Mold Shrinkage: 0.0034 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0068 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 210 MPa
$ 1758/MT
- Density: 1.09 g/cc
- Viscosity Measurement: 2.3 - 2.8
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 28.0 MPa
- Tensile Modulus: 2.07 GPa
$ 1606/MT
- Density: 1.55 g/cc
- Linear Mold Shrinkage: 0.0082 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0124 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 150 MPa
$ 1524/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage: 0.0085 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0084 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 85.0 MPa
$ 1617/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage: 0.0085 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0127 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 125 MPa
$ 1947/MT
- Density: 1.24 g/cc
- Viscosity Measurement: 0.49 - 0.78
- Linear Mold Shrinkage: 0.0049 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0078 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1569/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.017 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 35.0 MPa
$ 1693/MT
- Density: 1.36 g/cc
- Viscosity Measurement: 0.84 - 0.85
- Linear Mold Shrinkage: 0.0085 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0084 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1472/MT
- Density: 1.023 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0129 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 32.0 MPa
$ 1477/MT
- Density: 1.31 g/cc
- Tensile Strength at Break: 50.0 MPa
- Tensile Modulus: 2.00 GPa
- Flexural Strength: 85.0 MPa
- Flexural Modulus: 2.00 GPa
$ 1607/MT
- Density: 1.30 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0138 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 140 MPa
$ 1727/MT
- Density: 1.26 g/cc
- Viscosity Measurement: 1.38 - 1.41
- Linear Mold Shrinkage: 0.0138 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0141 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2524/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.0252 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0263 cm/cm
- Melt Flow: 22 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 18.0 MPa
$ 1467/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage: 0.0136 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0156 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 15.0 MPa
$ 2110/MT
- Density: 1.09 g/cc
- Viscosity Measurement: 2.8 - 3.5
- Linear Mold Shrinkage: 0.035 cm/cm
- Linear Mold Shrinkage, Transverse: 0.028 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2536/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage: 0.0093 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0108 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 100 MPa
$ 1949/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0264 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0271 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 16.0 MPa
$ 1510/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.0089 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0135 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 105 MPa
$ 1701/MT
- Density: 0.940 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 2042/MT
- Density: 0.980 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1941/MT
- Density: 0.980 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1961/MT
- Density: 1.08 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 5.0 - 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1468/MT
- Density: 1.14 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.016 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1574/MT
- Density: 1.03 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0111 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1983/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0102 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0103 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1523/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0102 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0103 cm/cm
- Melt Flow: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1786/MT
- Density: 1.20 g/cc
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 200 °C
- Tensile Strength at Break: 45.0 MPa
- Elongation at Break: 750 %
- Tensile Modulus: 0.350 GPa
$ 1914/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0188 cm/cm
- Linear Mold Shrinkage, Transverse: 0.020 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 40.0 MPa
$ 1752/MT
- Density: 1.33 g/cc
- Viscosity Measurement: 0.78 - 1.18
- Linear Mold Shrinkage: 0.0078 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0118 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1449/MT
- Density: 1.04 g/cc
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 33.0 MPa
- Elongation at Break: 17 %
- Tensile Modulus: 2.80 GPa
$ 1736/MT
- Density: 1.16 g/cc
- Viscosity Measurement: 0.75 - 0.87
- Linear Mold Shrinkage: 0.0075 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0087 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1465/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0065 cm/cm
- Melt Flow: 15 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 65.0 MPa
$ 1694/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage: 0.0072 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0087 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 165 MPa
$ 1774/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0155 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 30.0 MPa
$ 1701/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage: 0.0063 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0141 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 125 MPa
$ 2154/MT
- Density: 1.39 g/cc
- Viscosity Measurement: 0.40 - 0.52
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0052 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1620/MT
- Density: 1.32 g/cc
- Linear Mold Shrinkage: 0.0047 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0066 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 165 MPa
$ 2467/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0175 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0182 cm/cm
- Melt Flow: 25 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 34.0 MPa
$ 1521/MT
- Density: 0.880 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 30.0 MPa
$ 1706/MT
- Density: 1.33 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0058 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0154 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1963/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 40 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 55.0 MPa
$ 2217/MT
- Density: 1.11 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0058 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0127 cm/cm
- Melt Flow: 23 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1691/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage: 0.0085 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0127 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 120 MPa
$ 1591/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage: 0.0078 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0093 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 115 MPa
$ 2550/MT
- Density: 1.55 g/cc
- Linear Mold Shrinkage: 0.0056 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0093 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 230 MPa
$ 1781/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage: 0.0061 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0145 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 190 MPa
$ 1525/MT
- Density: 1.38 g/cc
- Linear Mold Shrinkage: 0.0099 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0133 cm/cm
- Melt Flow: 20 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 87.0 MPa
$ 1684/MT
- Density: 1.38 g/cc
- Viscosity Measurement: 0.52 - 0.62
- Linear Mold Shrinkage: 0.0052 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0062 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1654/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2225/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.0218 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0197 cm/cm
- Melt Flow: 25 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 30.0 MPa
$ 2323/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage: 0.0136 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0156 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 15.0 MPa
$ 1637/MT
- Density: 1.21 g/cc
- Linear Mold Shrinkage: 0.01405 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Melt Flow: 20 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 35.0 MPa
$ 2014/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage: 0.0085 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0127 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 125 MPa
$ 1458/MT
- Density: 1.11 g/cc
- Viscosity Measurement: 1.29 - 1.36
- Linear Mold Shrinkage: 0.0129 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0136 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1763/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage: 0.0043 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0177 cm/cm
- Melt Flow: 25 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 120 MPa
$ 1883/MT
- Density: 1.38 g/cc
- Linear Mold Shrinkage: 0.0097 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0139 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 85.0 MPa
$ 1543/MT
- Density: 1.36 g/cc
- Viscosity Measurement: 0.63 - 0.71
- Linear Mold Shrinkage: 0.0063 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0071 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1890/MT
- Density: 1.50 g/cc
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 25.0 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 5.40 GPa
$ 1998/MT
- Density: 1.02 g/cc
- Linear Mold Shrinkage: 0.0095 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0102 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 40.0 MPa
$ 2461/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0075 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 100 MPa
$ 1553/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0195 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 85.0 MPa
$ 1456/MT
- Density: 1.48 g/cc
- Linear Mold Shrinkage: 0.0064 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0189 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 90.0 MPa
$ 1716/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage: 0.0084 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0123 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 110 MPa
$ 1783/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.0108 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0107 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 85.0 MPa
$ 1448/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 80.0 MPa
$ 1477/MT
- Density: 1.27 g/cc
- Filler Content: 25 %
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 275 °C
- Tensile Strength at Break: 115 MPa
- Elongation at Break: 3.5 %
$ 1768/MT
- Density: 1.10 g/cc
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 3.20 GPa
$ 1595/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.0147 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0153 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 65.0 MPa
$ 2033/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0156 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0135 cm/cm
- Melt Flow: 12 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 32.0 MPa
$ 2177/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0083 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0072 cm/cm
- Melt Flow: 12 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 28.0 MPa
$ 2166/MT
- Density: 1.13 g/cc
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.00 GPa
$ 1546/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0151 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0127 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1486/MT
- Density: 1.27 g/cc
- Viscosity Measurement: 0.89 - 1.04
- Linear Mold Shrinkage: 0.0089 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0104 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2190/MT
- Density: 1.37 g/cc
- Melt Flow: 15 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 60.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 1.60 GPa
$ 2453/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 140 MPa
$ 1782/MT
- Density: 1.13 g/cc
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.50 GPa
$ 1783/MT
- Density: 1.28 g/cc
- Viscosity Measurement: 0.68 - 1.39
- Linear Mold Shrinkage: 0.0068 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0139 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2099/MT
- Density: 1.49 g/cc
- Linear Mold Shrinkage: 0.0072 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0146 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 135 MPa
$ 2133/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage: 0.0061 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0145 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 175 MPa
$ 1737/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2270/MT
- Density: 1.09 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 40.0 MPa
$ 1648/MT
- Density: 1.37 g/cc
- Viscosity Measurement: 0.36 - 0.37
- Linear Mold Shrinkage: 0.0037 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0036 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2172/MT
- Density: 1.55 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 210 MPa
$ 2226/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0125 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0117 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 30.0 MPa
$ 1695/MT
- Density: 1.49 g/cc
- Viscosity Measurement: 0.72 - 1.45
- Linear Mold Shrinkage: 0.0072 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0145 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1626/MT
- Density: 1.39 g/cc
- Viscosity Measurement: 0.71 - 1.05
- Linear Mold Shrinkage: 0.0071 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0105 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1497/MT
- Density: 1.29 g/cc
- Viscosity Measurement: 0.80 - 1.2
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1595/MT
- Density: 1.09 g/cc
- Viscosity Measurement: 3.02 - 3.14
- Linear Mold Shrinkage: 0.0314 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0302 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1456/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0256 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0253 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 30.0 MPa
$ 1776/MT
- Density: 1.40 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1683/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0116 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 24.0 MPa
$ 1995/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 15.0 MPa
$ 1770/MT
- Density: 1.19 g/cc
- Viscosity Measurement: 0.88 - 0.91
- Linear Mold Shrinkage: 0.0088 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0091 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1771/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0072 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0082 cm/cm
- Melt Flow: 6.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 80.0 MPa
$ 1788/MT
- Density: 1.13 g/cc
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.70 GPa
$ 1503/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage: 0.0124 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0087 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
$ 2062/MT
- Density: 1.15 g/cc
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.0 %
- Tensile Modulus: 6.50 GPa
$ 1623/MT
- Density: 1.28 g/cc
- Linear Mold Shrinkage: 0.0068 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0139 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 135 MPa
$ 1552/MT
- Density: 1.23 g/cc
- Viscosity Measurement: 0.67 - 1.58
- Linear Mold Shrinkage: 0.0067 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0158 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1557/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 15.0 MPa
$ 1636/MT
- Density: 1.23 g/cc
- Linear Mold Shrinkage: 0.0144 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0065 cm/cm
- Melt Flow: 20 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 34.0 MPa
$ 1717/MT
- Density: 1.53 g/cc
- Linear Mold Shrinkage: 0.0093 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0104 cm/cm
- Melt Flow: 25 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 60.0 MPa
$ 1708/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.0208 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0204 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 64.0 MPa
$ 1656/MT
- Density: 1.02 g/cc
- Linear Mold Shrinkage: 0.0193 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0188 cm/cm
- Melt Flow: 20 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 23.0 MPa
$ 1604/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 30.0 MPa
$ 1971/MT
- Density: 1.43 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 60.0 MPa
$ 1485/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.0054 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0078 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 105 MPa
$ 2045/MT
- Density: 1.08 g/cc
- Viscosity Measurement: 1.92 - 1.95
- Linear Mold Shrinkage: 0.0192 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0195 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1500/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.0071 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0105 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 190 MPa
$ 2592/MT
- Density: 0.930 g/cc
- Melt Flow: 0.50 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 28.0 MPa
- Elongation at Break: 200 %
- Flexural Modulus: 1.30 GPa
$ 1445/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0237 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0233 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 1552/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage: 0.0102 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0112 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 80.0 MPa
$ 2494/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.0175 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 24.0 MPa
$ 2182/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0177 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0189 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 80.0 MPa
$ 1574/MT
- Density: 1.36 g/cc
- Viscosity Measurement: 0.63 - 0.71
- Linear Mold Shrinkage: 0.0063 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0071 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1604/MT
- Density: 1.34 g/cc
- Linear Mold Shrinkage: 0.0052 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0097 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 135 MPa
$ 1545/MT
- Density: 1.50 g/cc
- Linear Mold Shrinkage: 0.0115 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0119 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 70.0 MPa
$ 1548/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage: 0.0125 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0131 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 30.0 MPa
$ 2509/MT
- Density: 1.21 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0155 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 33.0 MPa
$ 1494/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.017 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 33.0 MPa
$ 1865/MT
- Density: 1.04 g/cc
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 32.0 MPa
- Elongation at Break: 19 %
- Tensile Modulus: 2.60 GPa
$ 1463/MT
- Density: 1.41 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1886/MT
- Density: 1.45 g/cc
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0085 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 150 MPa
$ 1695/MT
- Density: 1.27 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0157 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 65.0 MPa
$ 1681/MT
- Density: 1.28 g/cc
- Linear Mold Shrinkage: 0.0011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0048 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 300 MPa
$ 1786/MT
- Density: 1.21 g/cc
- Linear Mold Shrinkage: 0.0144 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0165 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 31.0 MPa
$ 1986/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0048 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0051 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 95.0 MPa
$ 1792/MT
- Density: 1.30 g/cc
- Viscosity Measurement: 0.65 - 0.97
- Linear Mold Shrinkage: 0.0065 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0097 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1639/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0175 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 1499/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0144 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0144 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 85.0 MPa
$ 1500/MT
- Density: 1.23 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 275 °C
$ 1669/MT
- Density: 1.13 g/cc
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.90 GPa
$ 1543/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 40 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 55.0 MPa
$ 1605/MT
- Density: 1.10 g/cc
- Melt Flow: 4.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 60.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.60 GPa
$ 2244/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage: 0.0058 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0127 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 80.0 MPa
$ 1705/MT
- Density: 1.36 g/cc
- Viscosity Measurement: 1.07 - 1.08
- Linear Mold Shrinkage: 0.0108 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0107 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1813/MT
- Density: 1.13 g/cc
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.70 GPa
$ 1759/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.019 cm/cm
- Linear Mold Shrinkage, Transverse: 0.021 cm/cm
- Melt Flow: 15 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 45.0 MPa
$ 1577/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 1743/MT
- Density: 1.30 g/cc
- Viscosity Measurement: 0.79 - 0.82
- Linear Mold Shrinkage: 0.0082 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0079 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1535/MT
- Density: 1.51 g/cc
- Linear Mold Shrinkage: 0.0049 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0088 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 110 MPa
$ 1910/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.0058 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0134 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 100 MPa
$ 1494/MT
- Density: 1.13 g/cc
- Melt Flow: 9.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 3.00 GPa
$ 1761/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.0071 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0105 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 200 MPa
$ 2395/MT
- Density: 1.08 g/cc
- Viscosity Measurement: 2.53 - 2.56
- Linear Mold Shrinkage: 0.0256 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0253 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2101/MT
- Density: 1.43 g/cc
- Viscosity Measurement: 0.40 - 0.60
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1596/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0152 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 60.0 MPa
$ 1516/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage: 0.0101 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0164 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 90.0 MPa
$ 1452/MT
- Density: 1.28 g/cc
- Viscosity Measurement: 0.31 - 0.69
- Linear Mold Shrinkage: 0.0031 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0069 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1517/MT
- Density: 1.01 g/cc
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 18.0 MPa
- Elongation at Break: 25 %
- Tensile Modulus: 1.50 GPa
$ 2062/MT
- Density: 1.55 g/cc
- Linear Mold Shrinkage: 0.0082 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0124 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 130 MPa
$ 1545/MT
- Density: 1.13 g/cc
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.00 GPa
$ 1876/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.0078 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 77.0 MPa
$ 1935/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0090 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1936/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.021 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0198 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 30.0 MPa
$ 1794/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.0078 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 77.0 MPa
$ 2443/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0065 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0128 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2211/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0125 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0117 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 30.0 MPa
$ 2363/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage: 0.0043 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0038 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 125 MPa
$ 2383/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0189 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0165 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 100 MPa
$ 1603/MT
- Density: 1.53 g/cc
- Linear Mold Shrinkage: 0.0158 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0168 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 80.0 MPa
$ 2488/MT
- Density: 1.13 g/cc
- Viscosity Measurement: 1.8 - 1.93
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 4.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1704/MT
- Density: 1.21 g/cc
- Viscosity Measurement: 0.80 - 1.2
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1980/MT
- Density: 1.09 g/cc
- Viscosity Measurement: 3.02 - 3.14
- Linear Mold Shrinkage: 0.0314 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0302 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1760/MT
- Density: 1.58 g/cc
- Viscosity Measurement: 0.56 - 0.63
- Linear Mold Shrinkage: 0.0056 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0063 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1583/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0078 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 95.0 MPa
$ 2023/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.021 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0198 cm/cm
- Melt Flow: 12 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 28.0 MPa
$ 1769/MT
- Density: 0.940 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 23.0 MPa
$ 1581/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage: 0.0047 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0066 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 165 MPa
$ 1756/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0098 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0206 cm/cm
- Melt Flow: 0.50 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 75.0 MPa
$ 2002/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0175 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 25.0 MPa
$ 1797/MT
- Density: 1.38 g/cc
- Linear Mold Shrinkage: 0.0099 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0146 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 85.0 MPa
$ 1474/MT
- Density: 1.16 g/cc
- Viscosity Measurement: 0.87 - 1.24
- Linear Mold Shrinkage: 0.0124 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0087 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1922/MT
- Density: 1.10 g/cc
- Viscosity Measurement: 1.95 - 1.97
- Linear Mold Shrinkage: 0.0197 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0195 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2445/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 20 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 60.0 MPa
$ 1761/MT
- Density: 1.32 g/cc
- Linear Mold Shrinkage: 0.0078 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0118 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 165 MPa
$ 1953/MT
- Density: 1.21 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 130 °C
$ 1715/MT
- Density: 1.34 g/cc
- Linear Mold Shrinkage: 0.0052 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0097 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 135 MPa
$ 1650/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0157 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0168 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 36.0 MPa
$ 1544/MT
- Density: 1.35 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0075 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0112 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2051/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0225 cm/cm
- Melt Flow: 20 - 30 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 1507/MT
- Density: 1.35 g/cc
- Linear Mold Shrinkage: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Melt Flow: 15 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 75.0 MPa
$ 1623/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage: 0.0055 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0106 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 165 MPa
$ 1464/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0136 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0156 cm/cm
- Melt Flow: 25 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 25.0 MPa
$ 1681/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0148 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0153 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 110 MPa
$ 1882/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage: 0.0145 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0155 cm/cm
- Melt Flow: 22 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 30.0 MPa
$ 1614/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0078 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0085 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 17.0 MPa
$ 2328/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage: 0.0127 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0115 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 MPa
$ 1704/MT
- Density: 1.21 g/cc
- Linear Mold Shrinkage: 0.0079 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0019 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 120 MPa
$ 1792/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 65.0 MPa
$ 1689/MT
- Density: 1.03 g/cc
- Viscosity Measurement: 1.8 - 1.83
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1922/MT
- Density: 1.58 g/cc
- Linear Mold Shrinkage: 0.0047 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0066 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 235 MPa
$ 2384/MT
- Density: 1.01 g/cc
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 18.0 MPa
- Elongation at Break: 25 %
- Tensile Modulus: 1.50 GPa
$ 2355/MT
- Density: 1.63 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
- Melt Flow: 15 g/10 min @Load 2.16 kg, Temperature 250 °C
- Tensile Strength at Break: 55.0 MPa
$ 1676/MT
- Density: 1.09 g/cc
- Viscosity Measurement: 2.8 - 3.5
- Linear Mold Shrinkage: 0.035 cm/cm
- Linear Mold Shrinkage, Transverse: 0.028 cm/cm
- Melt Flow: 2.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1471/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 4.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 80.0 MPa
$ 2182/MT
- Density: 1.48 g/cc
- Linear Mold Shrinkage: 0.0091 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0109 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 120 MPa
$ 1522/MT
- Density: 1.23 g/cc
- Linear Mold Shrinkage: 0.0070 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 90.0 MPa
$ 1900/MT
- Density: 0.930 g/cc
- Linear Mold Shrinkage: 0.0244 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0239 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 28.0 MPa
$ 1712/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage: 0.0154 cm/cm
- Linear Mold Shrinkage, Transverse: 0.016 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 55.0 MPa
$ 2251/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.0078 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 90.0 MPa
$ 1917/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0065 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0128 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 100 MPa
$ 2210/MT
- Density: 0.940 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0124 cm/cm
- Melt Flow: 12 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 15.0 MPa
$ 1470/MT
- Density: 1.21 g/cc
- Linear Mold Shrinkage: 0.0068 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0111 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 65.0 MPa
$ 2119/MT
- Density: 1.36 g/cc
- Viscosity Measurement: 0.56 - 0.63
- Linear Mold Shrinkage: 0.0056 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0063 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1620/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.017 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 35.0 MPa
$ 1452/MT
- Density: 1.08 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1510/MT
- Density: 1.43 g/cc
- Linear Mold Shrinkage: 0.0058 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0099 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 130 MPa
$ 1502/MT
- Density: 1.39 g/cc
- Linear Mold Shrinkage: 0.0146 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0149 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
$ 1533/MT
- Density: 1.13 g/cc
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.00 GPa
$ 1793/MT
- Density: 1.55 g/cc
- Linear Mold Shrinkage: 0.0082 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0124 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 150 MPa
$ 1749/MT
- Density: 1.41 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0071 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0105 cm/cm
- Melt Flow: 1.5 g/10 min @Load 0.325 kg, Temperature 275 °C
$ 1557/MT
- Density: 1.46 g/cc
- Viscosity Measurement: 0.56 - 0.93
- Linear Mold Shrinkage: 0.0056 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0093 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1779/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0195 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0185 cm/cm
- Melt Flow: 5.0 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 35.0 MPa
$ 2394/MT
- Density: 1.05 g/cc
- Melt Flow: 20 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 25.0 MPa
- Elongation at Break: 15 %
- Tensile Modulus: 1.50 GPa
$ 1535/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0265 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0272 cm/cm
- Melt Flow: 12 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 17.0 MPa
$ 1528/MT
- Density: 1.38 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0046 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0058 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1464/MT
- Density: 1.24 g/cc
- Viscosity Measurement: 1.55 - 1.66
- Linear Mold Shrinkage: 0.0155 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0166 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2094/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage: 0.0154 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0162 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 45.0 MPa
$ 1896/MT
- Density: 1.13 g/cc
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 275 °C
- Tensile Strength at Break: 85.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.50 GPa
$ 1790/MT
- Density: 1.36 g/cc
- Linear Mold Shrinkage: 0.0134 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0137 cm/cm
- Melt Flow: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 70.0 MPa
$ 2447/MT
- Density: 1.07 g/cc
- Linear Mold Shrinkage: 0.0185 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0193 cm/cm
- Melt Flow: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 90.0 MPa
$ 1601/MT
- Density: 1.55 g/cc
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 275 °C
- Tensile Strength at Break: 230 MPa
$ 1540/MT
- Density: 1.14 g/cc
- Viscosity Measurement: 1.27 - 1.74
- Linear Mold Shrinkage: 0.0127 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0174 cm/cm
- Melt Flow: 8.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1550/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0184 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0168 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 25.0 MPa
$ 1905/MT
- Density: 1.23 g/cc
- Linear Mold Shrinkage: 0.0144 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0165 cm/cm
- Melt Flow: 10 g/10 min @Load 0.325 kg, Temperature 270 °C
- Tensile Strength at Break: 34.0 MPa
$ 2559/MT
- Density: 1.47 g/cc
- Linear Mold Shrinkage: 0.0152 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0148 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 210 MPa
$ 1576/MT
- Density: 1.45 g/cc
- Viscosity Measurement: 0.42 - 0.53
- Linear Mold Shrinkage: 0.0042 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0053 cm/cm
- Melt Flow: 1.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 1546/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.018 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0183 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 82.0 MPa
$ 1464/MT
- Density: 0.930 g/cc
- Linear Mold Shrinkage: 0.0242 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0243 cm/cm
- Melt Flow: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 28.0 MPa
$ 1637/MT
- Density: 1.13 g/cc
- Melt Flow: 14.5 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 75.0 MPa
- Elongation at Break: 3.5 %
- Tensile Modulus: 2.00 GPa
$ 2345/MT
- Density: 1.50 g/cc
- Viscosity Measurement: 1.15 - 1.19
- Linear Mold Shrinkage: 0.0115 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0119 cm/cm
- Melt Flow: 3.0 g/10 min @Load 0.325 kg, Temperature 270 °C
$ 2153/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0165 cm/cm
- Melt Flow: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: 80.0 MPa
Delivery Polymer Plastcom spol. s r.o.
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng carrier for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
