$ 2116/MT
- Density: 1.56 g/cc
- Filler Content: 50 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Hardness, Shore D: 81 @Time 15.0 sec
$ 1589/MT
- Density: 1.32 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength at Break: <= 155 MPa
$ 1886/MT
- Density: 1.33 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 140 MPa
$ 1615/MT
- Density: 1.31 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Hardness, Shore D: 76 @Time 15.0 sec
$ 2001/MT
- Density: 1.46 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Hardness, Shore D: 78 @Time 15.0 sec
$ 2060/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: <= 50.0 MPa
$ 1955/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 50.0 MPa
- Elongation at Break: 5.0 %
$ 1515/MT
- Density: 2.25 g/cc
- Filler Content: 75 %
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 20.0 MPa
- Elongation at Yield: 5.0 %
$ 2079/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2214/MT
- Density: 0.980 g/cc
- Filler Content: 12 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2091/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 240 °C
- Elongation at Break: 5.0 %
$ 1801/MT
- Density: 0.960 g/cc
- Filler Content: 10 %
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 54 @Time 15.0 sec
- Tensile Strength at Break: <= 19.0 MPa
$ 1883/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 190 °C
- Hardness, Shore A: 40 @Time 15.0 sec
$ 1941/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Melt Index of Compound: 7.0 g/10 min @Load 5.00 kg, Temperature 190 °C
- Hardness, Shore A: 50 @Time 15.0 sec
$ 1943/MT
- Density: 0.930 g/cc
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Hardness, Shore A: 60 @Time 15.0 sec
- Hardness, Shore D: 11 @Time 15.0 sec
$ 2116/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.014 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.014 - 0.020 cm/cm
- Melt Index of Compound: 1.0 g/10 min @Load 5.00 kg, Temperature 190 °C
- Hardness, Shore A: 55 @Time 15.0 sec
$ 1770/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Hardness, Shore D: 76 @Time 15.0 sec
- Tensile Strength at Break: <= 50.0 MPa
$ 1488/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.0 %
$ 1854/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 20.0 MPa
- Elongation at Yield: 7.0 %
$ 1500/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 45.0 MPa
$ 1481/MT
- Density: 1.08 g/cc
- Filler Content: 25 %
- Melt Index of Compound: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 55.0 MPa
- Flexural Strength: <= 95.0 MPa
$ 1583/MT
- Density: 1.16 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 18 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 40.0 MPa
$ 1770/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1447/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1887/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1644/MT
- Density: 1.11 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 30 g/10 min @Load 5.00 kg, Temperature 230 °C
$ 2336/MT
- Density: 1.70 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Tensile Strength at Break: <= 145 MPa
$ 1547/MT
- Density: 1.35 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0050 cm/cm
- Tensile Strength at Break: <= 80.0 MPa
$ 2036/MT
- Density: 0.960 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1928/MT
- Density: 1.10 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1552/MT
- Density: 1.08 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1507/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.011 cm/cm
- Tensile Strength at Break: <= 175 MPa
$ 1811/MT
- Density: 1.10 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1913/MT
- Density: 1.01 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.012 - 0.015 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.015 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1800/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.0 %
$ 1483/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 11 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1915/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.0 %
$ 2182/MT
- Density: 1.10 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2119/MT
- Density: 1.68 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: <= 73.0 MPa
- Elongation at Break: 5.0 %
- Flexural Strength: <= 115 MPa
$ 1795/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.012 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1566/MT
- Density: 2.17 g/cc
- Filler Content: 75 %
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 57.0 MPa
- Elongation at Break: 5.0 %
$ 1582/MT
- Density: 1.40 g/cc
- Filler Content: 52 %
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 23.0 MPa
- Elongation at Yield: 4.0 %
$ 1550/MT
- Density: 1.30 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Linear Mold Shrinkage: 0.0020 - 0.0060 cm/cm
- Tensile Strength at Break: <= 45.0 MPa
$ 1934/MT
- Density: 1.11 g/cc
- Melt Index of Compound: 30 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 25.0 MPa
- Elongation at Yield: 5.5 %
- Flexural Strength: <= 45.0 MPa
$ 1468/MT
- Density: 1.48 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength at Break: <= 100 MPa
$ 1564/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2206/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 4.5 %
$ 1921/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: <= 75.0 MPa
- Elongation at Break: 5.0 %
- Flexural Strength: <= 140 MPa
$ 2483/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1765/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1663/MT
- Density: 1.49 g/cc
- Filler Content: 15 %
- Tensile Strength at Break: <= 90.0 MPa
- Elongation at Break: 7.0 %
- Flexural Strength: <= 136 MPa
$ 1570/MT
- Density: 1.27 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: <= 48.0 MPa
- Elongation at Break: 4.0 %
- Flexural Strength: <= 84.0 MPa
$ 2594/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Linear Mold Shrinkage: 0.011 cm/cm
- Hardness, Shore D: 77 @Time 15.0 sec
- Tensile Strength at Break: <= 82.0 MPa
$ 1686/MT
- Density: 1.27 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Tensile Strength at Break: <= 140 MPa
$ 1529/MT
- Density: 1.48 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0090 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.014 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1768/MT
- Density: 1.27 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 105 MPa
$ 1525/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2432/MT
- Density: 1.25 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0030 - 0.0050 cm/cm
- Linear Mold Shrinkage: 0.0030 - 0.0050 cm/cm
- Elongation at Yield: 3.5 %
$ 1702/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1824/MT
- Density: 1.09 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.013 - 0.015 cm/cm
- Linear Mold Shrinkage: 0.013 - 0.015 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1490/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.5 %
$ 1515/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1673/MT
- Density: 1.34 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Tensile Strength at Break: <= 80.0 MPa
$ 1610/MT
- Density: 1.45 g/cc
- Filler Content: 20 %
- Tensile Strength at Break: <= 50.0 MPa
- Elongation at Break: 16 %
- Elongation at Yield: 5.0 %
$ 1751/MT
- Density: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2075/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Tensile Strength at Break: <= 60.0 MPa
- Elongation at Yield: 6.0 %
$ 1490/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1895/MT
- Density: 1.10 g/cc
- Filler Content: 10 %
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 29.0 MPa
- Elongation at Break: 4.0 %
$ 1612/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.015 - 0.018 cm/cm
- Linear Mold Shrinkage: 0.015 - 0.018 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 25.0 MPa
$ 1592/MT
- Density: 1.48 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Index of Compound: 23 g/10 min @Load 2.16 kg, Temperature 275 °C
$ 1638/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength at Break: <= 160 MPa
$ 2309/MT
- Density: 1.52 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 140 MPa
$ 2137/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Hardness, Shore D: 80 @Time 15.0 sec
$ 1644/MT
- Density: 1.51 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Tensile Strength at Break: <= 200 MPa
$ 1576/MT
- Density: 1.56 g/cc
- Filler Content: 50 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Hardness, Shore D: 81 @Time 15.0 sec
$ 1894/MT
- Density: 1.56 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Tensile Strength at Break: <= 95.0 MPa
$ 1491/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage: 0.014 cm/cm
- Tensile Strength at Break: <= 75.0 MPa
- Elongation at Yield: 4.0 %
$ 1444/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage: 0.014 cm/cm
- Hardness, Shore D: 77 @Time 15.0 sec
- Tensile Strength at Break: <= 75.0 MPa
$ 1445/MT
- Density: 1.27 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 140 MPa
$ 1481/MT
- Density: 1.47 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Hardness, Shore D: 80 @Time 15.0 sec
$ 2285/MT
- Density: 1.37 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 127 MPa
$ 1962/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Hardness, Shore D: 80 @Time 15.0 sec
$ 2051/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.010 cm/cm
- Linear Mold Shrinkage: 0.011 cm/cm
- Hardness, Shore D: 77 @Time 15.0 sec
- Tensile Strength at Break: <= 80.0 MPa
$ 1746/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Hardness, Shore D: 80 @Time 15.0 sec
$ 1469/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Hardness, Shore D: 73
- Tensile Strength at Break: <= 71.0 MPa
$ 1981/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Hardness, Shore D: 73
- Tensile Strength at Break: <= 71.0 MPa
$ 1677/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage: 0.014 cm/cm
- Tensile Strength at Break: <= 70.0 MPa
- Elongation at Yield: 5.0 %
$ 1620/MT
- Density: 1.20 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 120 MPa
$ 1716/MT
- Density: 1.10 g/cc
- Linear Mold Shrinkage: 0.013 cm/cm
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Shore D: 75 @Time 15.0 sec
- Tensile Strength at Break: <= 70.0 MPa
$ 1614/MT
- Density: 1.31 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Tensile Strength at Break: <= 80.0 MPa
$ 1752/MT
- Density: 1.20 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Hardness, Shore D: 75 @Time 15.0 sec
$ 1512/MT
- Density: 1.18 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Hardness, Shore D: 73 @Time 15.0 sec
$ 2067/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.014 cm/cm
- Linear Mold Shrinkage: 0.016 cm/cm
- Hardness, Shore D: 70 @Time 15.0 sec
- Tensile Strength at Break: <= 55.0 MPa
$ 1762/MT
- Density: 2.00 g/cc
- Filler Content: 60 %
- Tensile Strength at Break: <= 73.0 MPa
- Elongation at Break: 5.8 %
- Elongation at Yield: 5.0 %
$ 1495/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 170 MPa
$ 1613/MT
- Density: 1.21 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 125 MPa
$ 2268/MT
- Density: 1.27 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 130 MPa
$ 1697/MT
- Density: 1.42 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 155 MPa
$ 2164/MT
- Density: 1.20 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Tensile Strength at Break: <= 120 MPa
$ 1469/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Tensile Strength at Break: <= 55.0 MPa
- Flexural Strength: <= 85.0 MPa
$ 2390/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1596/MT
- Density: 1.22 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1474/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1635/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 18 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 48.0 MPa
$ 2403/MT
- Density: 0.960 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.013 - 0.016 cm/cm
- Linear Mold Shrinkage: 0.013 - 0.016 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1508/MT
- Density: 1.53 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Tensile Strength at Break: <= 135 MPa
$ 1861/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: <= 55.0 MPa
$ 2200/MT
- Density: 1.32 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.010 cm/cm
- Linear Mold Shrinkage: 0.010 cm/cm
- Hardness, Shore D: 75 @Time 15.0 sec
$ 1557/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: <= 60.0 MPa
$ 1975/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1910/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: <= 50.0 MPa
$ 1533/MT
- Density: 1.07 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0070 - 0.0090 cm/cm
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1607/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
Polykemi AB POLYfill PPH TS5040DS Polypropylene Homopolymer, Mineral Reinforced, Detergent Resistant
$ 1690/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1756/MT
- Density: 1.47 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Tensile Strength at Break: <= 135 MPa
$ 1550/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Tensile Strength at Break: <= 55.0 MPa
- Flexural Strength: <= 85.0 MPa
$ 1757/MT
- Density: 1.20 g/cc
- Filler Content: 40 %
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 15.0 MPa
- Elongation at Yield: 6.0 %
$ 1471/MT
- Density: 1.22 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1714/MT
- Density: 1.10 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1609/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1557/MT
- Density: 1.18 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1603/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Index of Compound: 7.5 g/10 min @Load 5.00 kg, Temperature 240 °C
- Hardness, Shore D: 64 @Time 15.0 sec
$ 1648/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 30.0 MPa
- Elongation at Yield: 6.0 %
$ 1476/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0060 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1710/MT
- Density: 1.19 g/cc
- Melt Index of Compound: 2.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 80.0 MPa
- Elongation at Yield: 10 %
- Flexural Strength: <= 140 MPa
$ 2182/MT
- Density: 1.22 g/cc
- Filler Content: 38 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1690/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 70.0 MPa
- Elongation at Break: 4.0 %
$ 2117/MT
- Density: 0.980 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1476/MT
- Density: 1.84 g/cc
- Filler Content: 65 %
- Linear Mold Shrinkage: 0.0045 cm/cm
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1453/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2224/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: <= 65.0 MPa
$ 1864/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0035 cm/cm
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2001/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Linear Mold Shrinkage: 0.017 cm/cm
- Hardness, Shore D: 75 @Time 15.0 sec
- Tensile Strength at Break: <= 60.0 MPa
$ 2103/MT
- Density: 1.18 g/cc
- Filler Content: 10 %
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: <= 48.0 MPa
- Elongation at Break: 109 %
$ 1625/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1470/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0025 - 0.0035 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1461/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: <= 65.0 MPa
$ 1630/MT
- Density: 1.42 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: <= 60.0 MPa
$ 1445/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Flexural Strength: <= 50.0 MPa
$ 1673/MT
- Density: 1.60 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 190 °C
$ 1469/MT
- Density: 1.49 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Tensile Strength at Break: <= 140 MPa
$ 1496/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1553/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Index of Compound: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1912/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0035 cm/cm
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Index of Compound: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1466/MT
- Density: 1.18 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 30 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1693/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Tensile Strength at Break: <= 70.0 MPa
- Elongation at Yield: 6.0 %
$ 1451/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 65 @Time 15.0 sec
$ 1945/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.011 cm/cm
- Tensile Strength at Break: <= 175 MPa
$ 1495/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 240 °C
- Hardness, Shore D: 62 @Time 15.0 sec
$ 1917/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 35 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: <= 45.0 MPa
$ 2385/MT
- Density: 1.17 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: <= 50.0 MPa
$ 1528/MT
- Density: 1.31 g/cc
- Filler Content: 25 %
- Flexural Modulus: 8.50 GPa @Temperature 23.0 °C
- Charpy Impact, Notched: 0.450 J/cm² @Temperature 23.0 °C
- Deflection Temperature at 0.46 MPa (66 psi): 249 °C
$ 1732/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Tensile Strength at Break: <= 60.0 MPa
- Elongation at Yield: 6.0 %
$ 2081/MT
- Density: 1.35 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0050 cm/cm
- Tensile Strength at Break: <= 80.0 MPa
$ 1501/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.0 %
$ 2216/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2178/MT
- Density: 2.25 g/cc
- Filler Content: 75 %
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 17.0 MPa
- Elongation at Yield: 5.0 %
$ 1960/MT
- Density: 1.86 g/cc
- Filler Content: 65 %
- Linear Mold Shrinkage: 0.011 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.014 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1576/MT
- Density: 1.06 g/cc
- Filler Content: 23 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1552/MT
- Density: 1.06 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 7.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 47.0 MPa
$ 1462/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 16 g/10 min @Load 5.00 kg, Temperature 230 °C
- Flexural Strength: <= 85.0 MPa
$ 1636/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0025 - 0.0035 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1677/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1762/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2065/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Index of Compound: 7.5 g/10 min @Load 5.00 kg, Temperature 240 °C
- Hardness, Shore D: 64 @Time 15.0 sec
$ 1755/MT
- Density: 1.84 g/cc
- Filler Content: 52 %
- Linear Mold Shrinkage: 0.0070 cm/cm
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength at Break: <= 105 MPa
$ 1586/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0035 cm/cm
- Linear Mold Shrinkage: 0.0070 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1481/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2244/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 42.0 MPa
$ 1978/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Tensile Strength at Break: <= 60.0 MPa
- Elongation at Yield: 6.0 %
$ 2088/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 48.0 MPa
$ 1557/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1494/MT
- Density: 1.47 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Hardness, Shore D: 80 @Time 15.0 sec
$ 1682/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1516/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Tensile Strength at Break: <= 50.0 MPa
- Elongation at Yield: 6.0 %
$ 1560/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Linear Mold Shrinkage: 0.0090 cm/cm
- Melt Index of Compound: 7.5 g/10 min @Load 5.00 kg, Temperature 240 °C
- Hardness, Shore D: 64 @Time 15.0 sec
$ 1517/MT
- Density: 1.06 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 47.0 MPa
$ 1874/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1761/MT
- Density: 0.900 g/cc
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 24.0 MPa
- Elongation at Yield: 10 %
- Flexural Strength: <= 28.0 MPa
$ 1634/MT
- Density: 1.19 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0030 - 0.0050 cm/cm
- Linear Mold Shrinkage: 0.0030 - 0.0050 cm/cm
- Tensile Strength at Break: <= 60.0 MPa
$ 2236/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1767/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.011 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1531/MT
- Density: 1.21 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.012 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1592/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Linear Mold Shrinkage: 0.017 cm/cm
- Hardness, Shore D: 75 @Time 15.0 sec
- Tensile Strength at Break: <= 60.0 MPa
$ 1645/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: <= 75.0 MPa
- Elongation at Break: 5.0 %
- Flexural Strength: <= 140 MPa
$ 1680/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1983/MT
- Density: 1.37 g/cc
- Filler Content: 45 %
- Melt Index of Compound: 0.10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 20.0 MPa
- Elongation at Yield: 15 %
$ 2151/MT
- Density: 1.47 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.010 cm/cm
- Hardness, Shore D: 82 @Time 15.0 sec
$ 1477/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1883/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1957/MT
- Density: 1.37 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.013 cm/cm
- Tensile Strength at Break: <= 110 MPa
$ 1674/MT
- Density: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1601/MT
- Density: 1.21 g/cc
- Filler Content: 38 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1474/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: <= 44.0 MPa
$ 2117/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.010 cm/cm
- Hardness, Shore D: 81 @Time 15.0 sec
$ 1475/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2148/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1513/MT
- Density: 1.14 g/cc
- Filler Content: 30 %
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 25.0 MPa
- Elongation at Yield: 7.0 %
$ 1670/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.012 cm/cm
- Linear Mold Shrinkage: 0.015 cm/cm
- Tensile Strength at Break: <= 85.0 MPa
- Elongation at Yield: 6.0 %
$ 1529/MT
- Density: 1.30 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength at Break: <= 45.0 MPa
$ 1740/MT
- Density: 1.51 g/cc
- Filler Content: 60 %
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 26.0 MPa
- Elongation at Yield: 3.0 %
$ 2413/MT
- Density: 1.25 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0030 - 0.0050 cm/cm
- Linear Mold Shrinkage: 0.0030 - 0.0050 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 1545/MT
- Density: 1.22 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1448/MT
- Density: 0.990 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.013 - 0.016 cm/cm
- Linear Mold Shrinkage: 0.013 - 0.016 cm/cm
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1843/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1589/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.011 cm/cm
- Linear Mold Shrinkage: 0.015 cm/cm
- Hardness, Shore D: 79 @Time 15.0 sec
- Tensile Strength at Break: <= 90.0 MPa
$ 1586/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: <= 50.0 MPa
$ 1653/MT
- Density: 2.25 g/cc
- Filler Content: 75 %
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 17.0 MPa
- Elongation at Yield: 5.0 %
$ 1576/MT
- Density: 1.14 g/cc
- Linear Mold Shrinkage: 0.0090 cm/cm
- Linear Mold Shrinkage: 0.014 cm/cm
- Hardness, Shore D: 80 @Time 15.0 sec
- Tensile Strength at Break: <= 95.0 MPa
$ 2024/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1466/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: <= 50.0 MPa
$ 1956/MT
- Density: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2179/MT
- Density: 1.05 g/cc
- Filler Content: 22 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1535/MT
- Density: 1.49 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.011 cm/cm
- Tensile Strength at Break: <= 165 MPa
$ 1610/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 24 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: <= 45.0 MPa
$ 1488/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Linear Mold Shrinkage: 0.018 cm/cm
- Hardness, Shore D: 70 @Time 15.0 sec
- Tensile Strength at Break: <= 50.0 MPa
$ 2072/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1488/MT
- Density: 1.86 g/cc
- Filler Content: 65 %
- Linear Mold Shrinkage: 0.011 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.014 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1652/MT
- Density: 1.86 g/cc
- Filler Content: 65 %
- Linear Mold Shrinkage: 0.011 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.014 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1947/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1570/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.011 cm/cm
- Hardness, Shore D: 82 @Time 15.0 sec
$ 1911/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1816/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.011 cm/cm
- Hardness, Shore D: 82 @Time 15.0 sec
$ 1454/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1567/MT
- Density: 1.07 g/cc
- Filler Content: 25 %
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 47 @Time 15.0 sec
- Flexural Strength: <= 32.0 MPa
$ 1494/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2560/MT
- Density: 1.06 g/cc
- Melt Index of Compound: 0.50 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 23.0 MPa
- Elongation at Break: 558 %
- Elongation at Yield: 9.0 %
$ 2546/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1597/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Elongation at Yield: 6.0 %
- Flexural Modulus: 3.00 GPa @Temperature 23.0 °C
$ 1490/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.0 %
$ 2106/MT
- Density: 1.90 g/cc
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73 @Time 15.0 sec
- Tensile Strength at Break: <= 28.0 MPa
- Elongation at Yield: 6.0 %
$ 1666/MT
- Density: 1.49 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.013 cm/cm
- Tensile Strength at Break: <= 115 MPa
$ 1551/MT
- Density: 1.31 g/cc
- Filler Content: 35 %
- Tensile Strength at Break: <= 105 MPa
- Elongation at Break: 6.0 %
- Flexural Strength: <= 160 MPa
$ 1590/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Hardness, Shore D: 76 @Time 15.0 sec
- Tensile Strength at Break: <= 50.0 MPa
$ 1652/MT
- Density: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1505/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.011 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1852/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 27.0 MPa
- Elongation at Break: 24 %
$ 1526/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1659/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2047/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Tensile Strength at Break: <= 60.0 MPa
- Elongation at Yield: 6.0 %
$ 1551/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 60.0 MPa
- Elongation at Yield: 7.0 %
$ 1606/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Hardness, Shore A: 80 @Time 15.0 sec
- Tensile Strength at Break: <= 12.0 MPa
$ 1723/MT
- Density: 1.30 g/cc
- Melt Index of Compound: 10 g/10 min @Load 5.00 kg, Temperature 190 °C
- Hardness, Shore A: 74 @Time 15.0 sec
- Tensile Strength at Break: <= 5.50 MPa
- Elongation at Break: 670 %
$ 1674/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 45.0 MPa
$ 1682/MT
- Density: 1.14 g/cc
- Filler Content: 17 %
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 230 °C
$ 2301/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 42.0 MPa
$ 1636/MT
- Density: 1.27 g/cc
- Filler Content: 20 %
- Melt Index of Compound: 17 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: <= 57.0 MPa
- Elongation at Break: 9.0 %
$ 1718/MT
- Density: 1.24 g/cc
- Filler Content: 18 %
- Linear Mold Shrinkage: 0.016 cm/cm
- Linear Mold Shrinkage: 0.017 cm/cm
- Hardness, Shore D: 75 @Time 15.0 sec
$ 1582/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage: 0.015 - 0.022 cm/cm
- Linear Mold Shrinkage: 0.015 - 0.022 cm/cm
- Hardness, Shore A: 60 @Time 15.0 sec
- Tensile Strength at Break: <= 5.00 MPa
$ 2173/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage: 0.015 - 0.022 cm/cm
- Linear Mold Shrinkage: 0.015 - 0.022 cm/cm
- Hardness, Shore A: 70 @Time 15.0 sec
- Tensile Strength at Break: <= 6.00 MPa
$ 2061/MT
- Density: 0.920 g/cc
- Melt Index of Compound: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 55 @Time 15.0 sec
- Tensile Strength at Break: <= 19.0 MPa
- Elongation at Break: 520 %
$ 1936/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 88 @Time 15.0 sec
$ 1818/MT
- Density: 0.980 g/cc
- Filler Content: 12 %
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 55 @Time 15.0 sec
- Tensile Strength at Break: <= 18.0 MPa
$ 1501/MT
- Density: 0.980 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2386/MT
- Density: 0.940 g/cc
- Filler Content: 5 %
- Linear Mold Shrinkage: 0.013 - 0.015 cm/cm
- Linear Mold Shrinkage: 0.013 - 0.015 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1741/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.0090 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.013 cm/cm
- Melt Index of Compound: 13 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore A: 97 @Time 15.0 sec
$ 1853/MT
- Density: 0.960 g/cc
- Linear Mold Shrinkage: 0.015 - 0.022 cm/cm
- Linear Mold Shrinkage: 0.015 - 0.022 cm/cm
- Hardness, Shore A: 90 @Time 15.0 sec
- Tensile Strength at Break: <= 12.0 MPa
$ 2069/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 5.00 kg, Temperature 190 °C
- Hardness, Shore A: 60 @Time 15.0 sec
$ 1789/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Hardness, Shore A: 70 @Time 15.0 sec
- Tensile Strength at Break: <= 10.0 MPa
$ 2129/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.014 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.014 - 0.020 cm/cm
- Hardness, Shore A: 80 @Time 15.0 sec
- Melt Temperature: 180 - 220 °C
$ 1515/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Linear Mold Shrinkage: 0.017 - 0.024 cm/cm
- Hardness, Shore A: 90 @Time 15.0 sec
- Tensile Strength at Break: <= 14.0 MPa
$ 1795/MT
- Density: 0.900 g/cc
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 56 @Time 15.0 sec
$ 2387/MT
- Density: 1.48 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.012 - 0.015 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.015 cm/cm
- Tensile Strength at Break: <= 50.0 MPa
$ 1602/MT
- Density: 1.24 g/cc
- Filler Content: 25 %
- Tensile Strength at Break: <= 27.0 MPa
- Elongation at Break: 5.0 %
- Flexural Strength: <= 57.0 MPa
$ 1471/MT
- Density: 1.20 g/cc
- Tensile Strength at Break: <= 56.0 MPa
- Elongation at Yield: 8.0 %
- Flexural Strength: <= 95.0 MPa
- Flexural Modulus: 2.10 GPa @Temperature 23.0 °C
$ 2088/MT
- Density: 1.34 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Tensile Strength at Break: <= 80.0 MPa
$ 1992/MT
- Density: 1.22 g/cc
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Tensile Strength at Break: <= 50.0 MPa
- Flexural Strength: <= 80.0 MPa
$ 2066/MT
- Density: 1.29 g/cc
- Tensile Strength at Break: <= 40.0 MPa
- Elongation at Yield: 5.0 %
- Flexural Strength: <= 67.0 MPa
- Flexural Modulus: 2.30 GPa @Temperature 23.0 °C
$ 1698/MT
- Density: 1.18 g/cc
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0070 - 0.010 cm/cm
- Hardness, Shore D: 76 @Time 15.0 sec
- Tensile Strength at Break: <= 50.0 MPa
$ 2079/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 30 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.0 %
$ 1848/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1641/MT
- Density: 1.48 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength at Break: <= 100 MPa
$ 1546/MT
- Density: 1.16 g/cc
- Filler Content: 17 %
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 230 °C
$ 1554/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0025 - 0.0035 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2213/MT
- Density: 1.31 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Tensile Strength at Break: <= 51.0 MPa
- Elongation at Yield: 8.0 %
$ 2195/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 30 g/10 min @Load 10.0 kg, Temperature 220 °C
- Tensile Strength at Break: <= 42.0 MPa
$ 2217/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0025 - 0.0035 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1979/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1923/MT
- Density: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1842/MT
- Density: 1.51 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength at Break: <= 160 MPa
$ 1582/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.0 %
$ 1533/MT
- Density: 1.39 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.011 cm/cm
- Melt Index of Compound: 48 g/10 min @Load 2.16 kg, Temperature 275 °C
$ 1450/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1533/MT
- Density: 1.03 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 42.0 MPa
$ 1480/MT
- Density: 1.28 g/cc
- Filler Content: 45 %
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 114 MPa
- Elongation at Break: 4.0 %
$ 1468/MT
- Density: 1.19 g/cc
- Filler Content: 20 %
- Tensile Strength at Break: <= 95.0 MPa
- Elongation at Break: 6.5 %
- Flexural Strength: <= 140 MPa
$ 1644/MT
- Density: 1.68 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Tensile Strength at Break: <= 145 MPa
$ 1895/MT
- Density: 0.960 g/cc
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Flexural Modulus: 0.950 GPa @Temperature 23.0 °C
- Charpy Impact Unnotched: NB @Temperature 23.0 °C
- Charpy Impact, Notched: 0.900 J/cm² @Temperature 23.0 °C
$ 1806/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1881/MT
- Density: 1.21 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 4.5 %
$ 1497/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0025 - 0.0035 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1880/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 42.0 MPa
$ 1656/MT
- Density: 2.00 g/cc
- Filler Content: 60 %
- Tensile Strength at Break: <= 100 MPa
- Elongation at Break: 4.0 %
- Flexural Strength: <= 150 MPa
$ 1860/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 18 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 43.0 MPa
$ 1788/MT
- Density: 1.40 g/cc
- Filler Content: 51 %
- Linear Mold Shrinkage: 0.0080 cm/cm
- Linear Mold Shrinkage: 0.011 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1468/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 70.0 MPa
- Elongation at Break: 4.0 %
$ 1637/MT
- Density: 1.43 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.013 cm/cm
- Tensile Strength at Break: <= 115 MPa
$ 1571/MT
- Density: 1.05 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 48.0 MPa
$ 1691/MT
- Density: 1.16 g/cc
- Filler Content: 17 %
- Linear Mold Shrinkage: 0.0025 - 0.0045 cm/cm
- Linear Mold Shrinkage: 0.0025 - 0.0045 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 10.0 kg, Temperature 220 °C
$ 2211/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0070 - 0.0090 cm/cm
- Linear Mold Shrinkage: 0.0070 - 0.0090 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1693/MT
- Density: 1.21 g/cc
- Filler Content: 38 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1605/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1611/MT
- Density: 0.900 g/cc
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 32.0 MPa
- Elongation at Yield: 17 %
- Flexural Strength: <= 28.0 MPa
$ 1554/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1482/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1582/MT
- Density: 1.18 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2088/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 21.0 MPa
- Elongation at Break: 9.0 %
$ 1842/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1518/MT
- Density: 1.44 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: <= 62.0 MPa
$ 1894/MT
- Density: 0.960 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.015 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.015 - 0.020 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2341/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1560/MT
- Density: 1.10 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1824/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 5.00 kg, Temperature 240 °C
- Elongation at Break: 5.0 %
$ 1712/MT
- Density: 1.23 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0050 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Tensile Strength at Break: <= 130 MPa
$ 1546/MT
- Density: 1.24 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Tensile Strength at Break: <= 60.0 MPa
- Elongation at Yield: 6.0 %
$ 1564/MT
- Density: 1.11 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 5.00 kg, Temperature 230 °C
$ 1602/MT
- Density: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1445/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 18 g/10 min @Load 5.00 kg, Temperature 230 °C
- Ball Indentation Hardness: 95.7 MPa @Load 36.5 kg, Time 30.0 sec
$ 1449/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Melt Index of Compound: 27 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 97 @Time 15.0 sec
$ 1556/MT
- Density: 0.940 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Linear Mold Shrinkage: 0.015 cm/cm
- Melt Index of Compound: 14 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 35.0 MPa
$ 1948/MT
- Density: 1.47 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0035 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Tensile Strength at Break: <= 120 MPa
$ 2269/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1687/MT
- Density: 1.30 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 260 °C
$ 2253/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1677/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 5.00 kg, Temperature 240 °C
- Elongation at Yield: 4.5 %
$ 2356/MT
- Density: 1.17 g/cc
- Filler Content: 35 %
- Melt Index of Compound: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 30.0 MPa
- Elongation at Yield: 8.0 %
$ 1828/MT
- Density: 1.29 g/cc
- Tensile Strength at Break: <= 40.0 MPa
- Elongation at Yield: 5.0 %
- Flexural Strength: <= 67.0 MPa
- Flexural Modulus: 2.30 GPa @Temperature 23.0 °C
$ 1656/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2186/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 50 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.0 %
$ 1646/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1476/MT
- Density: 1.36 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: <= 75.0 MPa
- Elongation at Break: 5.0 %
- Flexural Strength: <= 140 MPa
$ 1832/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.013 - 0.015 cm/cm
- Linear Mold Shrinkage: 0.013 - 0.015 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2259/MT
- Density: 1.11 g/cc
- Filler Content: 30 %
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 65.0 MPa
- Elongation at Yield: 7.0 %
$ 2046/MT
- Density: 1.06 g/cc
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 24.0 MPa
$ 1605/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.015 - 0.018 cm/cm
- Linear Mold Shrinkage: 0.015 - 0.018 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 28.0 MPa
$ 1576/MT
- Density: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1829/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 40.0 MPa
$ 1614/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0025 - 0.0035 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1651/MT
- Density: 1.03 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1628/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1596/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.014 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1456/MT
- Density: 1.55 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.013 cm/cm
- Tensile Strength at Break: <= 105 MPa
$ 1494/MT
- Density: 1.11 g/cc
- Linear Mold Shrinkage: 0.015 cm/cm
- Linear Mold Shrinkage: 0.017 cm/cm
- Tensile Strength at Break: <= 75.0 MPa
- Elongation at Break: 6.0 %
$ 1548/MT
- Density: 1.12 g/cc
- Tensile Strength at Break: <= 75.0 MPa
- Elongation at Yield: 5.0 %
- Flexural Strength: <= 120 MPa
- Flexural Modulus: 2.80 GPa @Temperature 23.0 °C
$ 1897/MT
- Density: 1.56 g/cc
- Filler Content: 50 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Hardness, Shore D: 83 @Time 15.0 sec
$ 1665/MT
- Density: 1.09 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1684/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1814/MT
- Density: 1.12 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1852/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0040 - 0.0060 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1488/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 20.0 MPa
- Elongation at Yield: 6.0 %
$ 2067/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1763/MT
- Density: 1.22 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1889/MT
- Density: 1.39 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0050 cm/cm
- Tensile Strength at Break: <= 90.0 MPa
$ 1738/MT
- Density: 1.10 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1575/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.013 - 0.015 cm/cm
- Linear Mold Shrinkage: 0.013 - 0.015 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1886/MT
- Density: 1.04 g/cc
- Melt Index of Compound: 3.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 42.0 MPa
- Elongation at Yield: 5.5 %
- Flexural Strength: <= 66.0 MPa
$ 1445/MT
- Density: 1.00 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1745/MT
- Density: 1.42 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength at Break: <= 195 MPa
$ 1762/MT
- Density: 1.20 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Hardness, Shore D: 74 @Time 15.0 sec
$ 1529/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.016 cm/cm
- Linear Mold Shrinkage: 0.018 cm/cm
- Tensile Strength at Break: <= 50.0 MPa
- Elongation at Yield: 8.0 %
$ 1511/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Tensile Strength at Break: <= 60.0 MPa
- Elongation at Yield: 6.0 %
$ 1542/MT
- Density: 1.17 g/cc
- Filler Content: 14 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.012 cm/cm
- Hardness, Shore D: 73 @Time 15.0 sec
$ 1718/MT
- Density: 1.43 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength at Break: <= 100 MPa
$ 1773/MT
- Density: 1.51 g/cc
- Filler Content: 60 %
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1858/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2375/MT
- Density: 1.33 g/cc
- Filler Content: 50 %
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 104 MPa
- Elongation at Break: 3.0 %
$ 1572/MT
- Density: 0.980 g/cc
- Filler Content: 12 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1582/MT
- Density: 1.47 g/cc
- Filler Content: 20 %
- Tensile Strength at Break: <= 150 MPa
- Elongation at Break: 3.0 %
- Flexural Strength: <= 200 MPa
$ 1530/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2281/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 240 °C
- Hardness, Shore D: 62 @Time 15.0 sec
$ 1682/MT
- Density: 1.19 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 35 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.5 %
$ 1854/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2271/MT
- Density: 1.24 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0060 cm/cm
- Tensile Strength at Break: <= 75.0 MPa
$ 1605/MT
- Density: 0.910 g/cc
- Linear Mold Shrinkage: 0.015 - 0.018 cm/cm
- Linear Mold Shrinkage: 0.015 - 0.018 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 21.0 MPa
$ 1444/MT
- Density: 0.960 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.013 - 0.016 cm/cm
- Linear Mold Shrinkage: 0.013 - 0.016 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1477/MT
- Density: 1.13 g/cc
- Filler Content: 15 %
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 5.00 kg, Temperature 230 °C
$ 1579/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
Polykemi AB SCANAMID 66 A12^ F35 NH9 Nylon 66, Glass Fiber Reinforced, Flame Retardant, Halogen Free
$ 1780/MT
- Density: 1.47 g/cc
- Filler Content: 35 %
- Tensile Strength at Break: <= 165 MPa
- Elongation at Break: 3.0 %
- Flexural Strength: <= 270 MPa
$ 1528/MT
- Density: 0.960 g/cc
- Filler Content: 10 %
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 50.0 MPa
- Elongation at Break: 6.0 %
$ 1585/MT
- Density: 0.940 g/cc
- Filler Content: 7 %
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 30.0 MPa
- Elongation at Break: 13 %
$ 1468/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1471/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 3.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2057/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 48.0 MPa
$ 1942/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1570/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 12 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1742/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 16 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2108/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 43.0 MPa
$ 1959/MT
- Density: 1.15 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.0 %
$ 1570/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 42.0 MPa
$ 1507/MT
- Density: 0.900 g/cc
- Melt Index of Compound: 7.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 29.0 MPa
- Elongation at Yield: 9.0 %
- Flexural Strength: <= 39.0 MPa
$ 1659/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1507/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1976/MT
- Density: 1.35 g/cc
- Filler Content: 50 %
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 25.0 MPa
- Flexural Strength: <= 56.0 MPa
$ 1480/MT
- Density: 1.20 g/cc
- Filler Content: 10 %
- Melt Index of Compound: 35 g/10 min @Load 5.00 kg, Temperature 260 °C
- Tensile Strength at Break: <= 53.0 MPa
- Elongation at Break: 93 %
$ 2153/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Melt Index of Compound: 27 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 97 @Time 15.0 sec
$ 2004/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Tensile Strength at Break: <= 60.0 MPa
- Elongation at Yield: 6.0 %
$ 1589/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 18 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 40.0 MPa
$ 1614/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Melt Index of Compound: 1.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1691/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1904/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2394/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 2.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1449/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1562/MT
- Density: 1.39 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 cm/cm
- Linear Mold Shrinkage: 0.0050 cm/cm
- Tensile Strength at Break: <= 90.0 MPa
$ 1830/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1652/MT
- Density: 1.04 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 40.0 MPa
$ 1900/MT
- Density: 0.960 g/cc
- Filler Content: 10 %
- Linear Mold Shrinkage: 0.013 - 0.016 cm/cm
- Linear Mold Shrinkage: 0.013 - 0.016 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1675/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.012 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1826/MT
- Density: 1.33 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.011 cm/cm
- Hardness, Shore D: 77 @Time 15.0 sec
$ 1597/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 45.0 MPa
$ 2059/MT
- Density: 1.27 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0020 - 0.0040 cm/cm
- Elongation at Break: 2.5 %
$ 1948/MT
- Density: 1.45 g/cc
- Filler Content: 43 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.010 cm/cm
- Tensile Strength at Break: <= 140 MPa
$ 2490/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2010/MT
- Density: 1.25 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Tensile Strength at Break: <= 37.0 MPa
- Flexural Strength: <= 61.0 MPa
$ 1627/MT
- Density: 1.17 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage: 0.0025 - 0.0035 cm/cm
- Linear Mold Shrinkage: 0.0025 - 0.0035 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1955/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1626/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 23 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 45.0 MPa
$ 2266/MT
- Density: 1.06 g/cc
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 5.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 48.0 MPa
$ 1523/MT
- Density: 1.06 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 9.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 2171/MT
- Density: 1.21 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 25 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 4.5 %
$ 1962/MT
- Density: 1.41 g/cc
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Linear Mold Shrinkage: 0.018 - 0.020 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 190 °C
- Tensile Strength at Break: <= 65.0 MPa
$ 1466/MT
- Density: 1.20 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Tensile Strength at Break: <= 60.0 MPa
- Elongation at Yield: 6.0 %
$ 2258/MT
- Density: 1.20 g/cc
- Filler Content: 20 %
- Melt Index of Compound: 17 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: <= 75.0 MPa
- Elongation at Break: 5.0 %
$ 1783/MT
- Density: 1.10 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 6.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1715/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.010 - 0.013 cm/cm
- Melt Index of Compound: 4.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1857/MT
- Density: 1.48 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage: 0.0030 cm/cm
- Linear Mold Shrinkage: 0.0080 cm/cm
- Tensile Strength at Break: <= 150 MPa
$ 2048/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Linear Mold Shrinkage: 0.0090 - 0.011 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1612/MT
- Density: 1.12 g/cc
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Linear Mold Shrinkage: 0.0050 - 0.0070 cm/cm
- Melt Index of Compound: 50 g/10 min @Load 5.00 kg, Temperature 260 °C
- Elongation at Yield: 5.0 %
$ 1811/MT
- Density: 1.05 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0030 - 0.0040 cm/cm
- Linear Mold Shrinkage: 0.0060 - 0.0080 cm/cm
- Melt Index of Compound: 10 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1688/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1672/MT
- Density: 1.08 g/cc
- Filler Content: 25 %
- Melt Index of Compound: 5.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Tensile Strength at Break: <= 20.0 MPa
- Elongation at Yield: 7.0 %
$ 2121/MT
- Density: 1.08 g/cc
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 14 g/10 min @Load 5.00 kg, Temperature 240 °C
- Hardness, Shore D: 62 @Time 15.0 sec
$ 2191/MT
- Density: 1.13 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Linear Mold Shrinkage: 0.012 - 0.014 cm/cm
- Melt Index of Compound: 30 g/10 min @Load 2.16 kg, Temperature 230 °C
Polykemi AB POLYfill PPH K20020 D Polypropylene Homopolymer, Mineral Reinforced, Detergent Resistant
$ 1576/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1716/MT
- Density: 1.23 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Linear Mold Shrinkage: 0.0080 - 0.010 cm/cm
- Melt Index of Compound: 20 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1740/MT
- Density: 1.43 g/cc
- Filler Content: 30 %
- Linear Mold Shrinkage: 0.0010 cm/cm
- Linear Mold Shrinkage: 0.0040 cm/cm
- Tensile Strength at Break: <= 100 MPa
$ 2272/MT
- Density: 1.04 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage: 0.011 - 0.013 cm/cm
- Melt Index of Compound: 15 g/10 min @Load 2.16 kg, Temperature 230 °C
$ 1934/MT
- Density: 1.46 g/cc
- Filler Content: 20 %
- Linear Mold Shrinkage: 0.0040 cm/cm
- Linear Mold Shrinkage: 0.013 cm/cm
- Tensile Strength at Break: <= 120 MPa
Delivery Polymer Polykemi AB
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng tankers for sale russia. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
