$ 1966/MT
- Density: 1.39 g/cc
- Tensile Strength: 121 MPa
- Elongation at Break: 4.1 %
- Tensile Modulus: 4.21 GPa
- Flexural Strength: 182 MPa
$ 1573/MT
- Density: 1.42 g/cc
- Water Absorption: 0.33 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0085 cm/cm
- Tensile Strength: 152 MPa
- Tensile Stress: 192 MPa
$ 1717/MT
- Density: 1.56 g/cc
- Water Absorption: 0.18 % @Time 86400 sec
- Tensile Strength: 81.4 MPa
- Elongation at Break: 1.9 %
- Tensile Modulus: 7.45 GPa
$ 1567/MT
- Density: 1.30 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 380000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 - 0.015 cm/cm
$ 1841/MT
- Density: 1.30 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 440000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 - 0.015 cm/cm
$ 1614/MT
- Density: 1.42 g/cc
- Filler Content: 15 %
- Tensile Strength at Break: 138 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 6.70 GPa
$ 1493/MT
- Density: 1.75 - 1.77 g/cc
- Water Absorption at Saturation: 0.040 %
- Viscosity: 1.75e+6 - 2.05e+6 cP
- Melting Point: 164 - 167 °C
- Availability: Europe; North America
$ 1900/MT
- Density: 1.48 g/cc
- Filler Content: 33 %
- Water Absorption: 0.21 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
$ 1444/MT
- Density: 1.33 g/cc
- Water Absorption: 1.0 % @Time 86400 sec
- Thickness: 100 microns
- Film Elongation at Break, MD: 190 %
- Film Elongation at Yield, MD: 7.0 %
$ 1790/MT
- Density: 1.57 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1617/MT
- Density: 2.13 - 2.18 g/cc
- Melt Flow: 10 - 17 g/10 min @Load 5.00 kg, Temperature 372 °C
- Hardness, Shore D: 55 - 60
- Tensile Strength at Break: >= 21.0 MPa
- Elongation at Break: >= 280 %
$ 1814/MT
- Density: 2.16 g/cc
- Melt Flow: 10 - 17 g/10 min @Load 5.00 kg, Temperature 372 °C
- Melting Point: 300 - 310 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 1519/MT
- Density: 1.41 g/cc
- Melting Point: 310 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
- Availability: Europe
$ 1742/MT
- Density: 1.42 g/cc
- Filler Content: 30 %
- Water Absorption: 0.20 % @Time 86400 sec
- Viscosity: 540000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.00 - 0.0020 cm/cm @Thickness 3.18 mm
$ 1546/MT
- Density: 1.28 g/cc
- Filler Content: 16 %
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 2166/MT
- Density: 2.11 - 2.16 g/cc
- Melt Flow: 4.0 - 8.0 g/10 min @Load 5.00 kg, Temperature 372 °C
- Hardness, Shore D: 55 - 60
- Tensile Strength at Break: >= 28.0 MPa
- Elongation at Break: >= 300 %
$ 1718/MT
- Density: 1.40 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 3.5 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 38
- Tensile Strength at Break: 12.3 MPa
$ 1563/MT
- Viscosity: 800 cP
- Glass Transition Temp, Tg: 220 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
- Availability: Europe
$ 1555/MT
- Density: 1.24 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Thickness: 30.0 microns
- Film Tensile Strength at Yield, MD: 68.0 MPa
- Film Tensile Strength at Yield, TD: 63.7 MPa
$ 2117/MT
- Density: 1.48 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 4.0 g/10 min @Load 21.6 kg, Temperature 150 °C
- Hardness, Shore D: 47
- Tensile Strength at Break: 14.5 MPa
$ 1949/MT
- Density: 1.68 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 2095/MT
- Density: 1.99 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell M: 101
$ 2474/MT
- Mooney Viscosity: 53 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1931/MT
- Viscosity: 560 cP
- Glass Transition Temp, Tg: 216 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
- Availability: Europe
$ 1715/MT
- Density: 1.45 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: 210 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 11.9 GPa
$ 1652/MT
- Density: 1.45 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0090 cm/cm
- Tensile Strength: 176 MPa
$ 1497/MT
- Density: 1.69 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1747/MT
- Density: 2.00 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Tensile Strength: 150 MPa
- Elongation at Break: 1.0 %
- Flexural Strength: 230 MPa
$ 1487/MT
- Density: 1.29 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Viscosity: 240000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.010 - 0.012 cm/cm @Thickness 3.18 mm
$ 2468/MT
- Density: 2.13 - 2.18 g/cc
- Melt Flow: 22 - 28 g/10 min @Load 5.00 kg, Temperature 372 °C
- Hardness, Shore D: 55 - 60
- Tensile Strength at Break: >= 22.0 MPa
- Elongation at Break: >= 280 %
$ 1532/MT
- Mooney Viscosity: 34 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1978/MT
- Density: 1.33 g/cc
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Melt Flow: 6.5 g/10 min @Load 2.16 kg, Temperature 343 °C
- Tensile Strength: 77.9 MPa
- Elongation at Break: 4.0 %
$ 1939/MT
- Density: 1.34 g/cc
- Filler Content: 30 %
- Water Absorption: 0.15 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
$ 1655/MT
- Density: 1.29 g/cc
- Water Absorption: 0.37 % @Time 86400 sec
- Water Absorption at Saturation: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Thickness 3.18 mm
- Melt Flow: 20 - 28 g/10 min @Load 5.00 kg, Temperature 365 °C
$ 1611/MT
- Density: 1.37 g/cc
- Water Absorption: 0.60 % @Time 86400 sec
- CTE, linear, Parallel to Flow: 49.0 µm/m-°C
- Glass Transition Temp, Tg: 220 °C
- Availability: Africa & Middle East
$ 1601/MT
- Density: 1.34 - 1.42 g/cc
- Water Absorption: 0.35 % @Time 86400 sec
- Tensile Strength: 58.6 MPa @Thickness 3.18 mm
- Elongation at Break: 15 % @Thickness 3.18 mm
- Tensile Modulus: 2.28 GPa @Thickness 3.18 mm
$ 1677/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Linear Mold Shrinkage, Flow: 0.025 cm/cm
- Melt Flow: 50 g/10 min @Load 2.16 kg, Temperature 275 °C
- Hardness, Rockwell R: 90
$ 2306/MT
- Mooney Viscosity: 20 @Temperature 121 °C
- FDA: Yes
- Agency Ratings: FDA 21 CFR 177.2600
- Availability: Europe; North America
- Color: Off-White
$ 1954/MT
- Water Vapor Transmission: 11.0 g/m²/day @Thickness 0.00100 mm, Temperature 38.0 °C
- Coefficient of Friction, Dynamic: 0.35
- FDA: Yes
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Europe
$ 1624/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Melt Flow: 3.0 - 9.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Tensile Strength at Break: 20.0 - 40.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 15.0 - 18.0 MPa @Thickness 2.00 mm
$ 1528/MT
- Water Vapor Transmission: 18.0 g/m²/day @Thickness 0.00100 mm, Temperature 38.0 °C
- Tensile Impact Strength: 500 kJ/m²
- FDA: Yes
- Agency Ratings: DMF 11383; EC 1907/2006 (REACH); EU No 10/2011
- Agency Ratings: FDA 21 CFR 176.170; FDA 21 CFR 176.180
$ 1820/MT
- Density: 1.22 g/cc
- Filler Content: 15 %
- Tensile Strength: 95.8 MPa
- Elongation at Break: 5.3 %
- Tensile Modulus: 4.20 GPa
$ 1780/MT
- Density: 1.60 g/cc
- Filler Content: 50 %
- Water Absorption: 0.19 % @Time 86400 sec
- Water Absorption at Saturation: 1.5 %
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm
$ 1720/MT
- Density: 1.56 g/cc
- Filler Content: 40 %
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm @Thickness 3.20 mm
$ 2238/MT
- Density: 1.42 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 6.2 g/10 min @Load 21.6 kg, Temperature 150 °C
- Hardness, Shore D: 47
- Tensile Strength at Break: 14.5 MPa
$ 1486/MT
- Density: 1.41 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 6.5 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 45
- Tensile Strength at Break: 11.5 MPa
$ 2211/MT
- Mooney Viscosity: 10 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Coating; Compounding; Dip Coating; Spraying
$ 1894/MT
- Filler Content: 33 %
- Linear Mold Shrinkage, Flow: 0.0037 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0089 cm/cm
- Tensile Strength: 174 MPa
- Elongation at Break: 1.8 %
$ 1553/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: Grey
- Form: Powder
$ 1465/MT
- Drying Temperature: 177 °C @Time 10800 sec
- Availability: Africa & Middle East
- Availability: Asia Pacific
- Availability: Europe
- Availability: Latin America
$ 1796/MT
- Drying Temperature: 177 °C @Time 10800 sec
- Availability: Africa & Middle East
- Availability: Asia Pacific
- Availability: Europe
- Availability: Latin America
$ 2371/MT
- Density: 1.42 g/cc
- Water Absorption: 0.33 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0085 cm/cm
- Tensile Strength: 152 MPa
- Tensile Stress: 192 MPa
$ 1472/MT
- Density: 1.51 g/cc
- Water Absorption: 0.33 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0025 - 0.0045 cm/cm
- Tensile Strength: 117 MPa
- Tensile Stress: 131 MPa
$ 1625/MT
- Density: 1.46 g/cc
- Water Absorption: 0.28 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0035 - 0.0060 cm/cm
- Tensile Strength: 113 MPa
- Tensile Stress: 163 MPa
$ 1477/MT
- Density: 1.59 g/cc
- Water Absorption: 0.12 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0014 cm/cm
- Tensile Strength: 93.8 MPa
- Tensile Stress: 110 MPa
$ 1714/MT
- Density: 1.57 g/cc
- Water Absorption: 0.25 % @Time 86400 sec
- Tensile Strength: 114 MPa
- Elongation at Break: 0.80 %
- Tensile Modulus: 18.6 GPa
$ 1491/MT
- Density: 1.61 g/cc
- Filler Content: 30 %
- Water Absorption: 0.24 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0025 cm/cm
- Tensile Strength: 221 MPa
$ 2174/MT
- Density: 1.48 g/cc
- Filler Content: 30 %
- Water Absorption: 0.26 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00 - 0.0015 cm/cm
- Tensile Strength: 221 MPa
$ 2527/MT
- Availability: Africa & Middle East
- Availability: Asia Pacific
- Availability: Europe
- Availability: Latin America
- Availability: North America
$ 1481/MT
- Density: 1.40 g/cc
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Melt Flow: 6.5 g/10 min @Load 2.16 kg, Temperature 343 °C
- Tensile Strength: 96.5 MPa
- Elongation at Break: 3.0 %
$ 1871/MT
- Mooney Viscosity: 75 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Compounding
$ 2429/MT
- Mooney Viscosity: 26 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1586/MT
- Density: 1.24 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 343 °C
- Tensile Strength at Break: 70.3 MPa
$ 1651/MT
- Density: 1.38 g/cc
- Filler Content: 13 %
- Viscosity: 534000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Tensile Strength: 117 MPa
- Elongation at Break: 6.2 %
$ 1515/MT
- Density: 2.13 - 2.18 g/cc
- Melt Flow: 2.0 - 5.0 g/10 min @Load 5.00 kg, Temperature 372 °C
- Hardness, Shore D: 55 - 60
- Tensile Strength at Break: >= 26.0 MPa
- Elongation at Break: >= 300 %
$ 2181/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
$ 1528/MT
- Density: 1.66 g/cc
- Filler Content: 15 %
- Water Absorption: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0028 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0082 cm/cm
$ 1686/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.020 - 0.030 cm/cm
- Melt Flow: 4.0 - 8.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Hardness, Shore D: 70 - 75
$ 1748/MT
- Density: 1.68 g/cc
- Filler Content: 33 %
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1498/MT
- Density: 1.35 g/cc
- Filler Content: 25 %
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1805/MT
- Density: 1.29 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 510000 - 650000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Tensile Strength, Yield: 94.5 MPa
- Elongation at Break: 25 - 50 %
$ 2231/MT
- Density: 1.29 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 510000 - 650000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Tensile Strength, Yield: 94.5 MPa
- Elongation at Break: 25 - 50 %
$ 1522/MT
- Density: 1.41 g/cc
- Filler Content: 30 %
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 920000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.00 - 0.0020 cm/cm @Thickness 3.18 mm
$ 1657/MT
- Density: 1.40 g/cc
- Filler Content: 15 %
- Tensile Strength at Break: 124 MPa
- Elongation at Break: 5.0 %
- Tensile Modulus: 6.20 GPa
$ 1991/MT
- Density: 1.53 g/cc
- Filler Content: 30 %
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 850000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.18 mm
$ 1886/MT
- Density: 1.35 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 170000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.012 - 0.014 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.016 - 0.018 cm/cm @Thickness 3.18 mm
$ 1613/MT
- Density: 1.45 g/cc
- Water Absorption: 0.14 % @Time 86400 sec
- Viscosity: 270000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.015 - 0.017 cm/cm @Thickness 3.18 mm
$ 2068/MT
- Density: 1.50 g/cc
- Water Absorption: 0.030 % @Time 86400 sec
- Viscosity: 380000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.00 - 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.013 - 0.015 cm/cm @Thickness 3.18 mm
$ 1985/MT
- Density: 1.30 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Tensile Strength: 96.0 MPa
- Elongation at Yield: 5.2 %
- Tensile Modulus: 3.60 GPa
$ 2041/MT
- Density: 1.30 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 380000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.012 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm @Thickness 3.18 mm
$ 2026/MT
- Density: 1.30 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 380000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 - 0.015 cm/cm
$ 1619/MT
- Density: 1.30 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 380000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.012 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.014 cm/cm @Thickness 3.18 mm
$ 1447/MT
- Density: 1.46 g/cc
- Filler Content: 20 %
- Water Absorption: 0.022 % @Time 86400 sec
- Tensile Strength at Break: 162 MPa
- Elongation at Break: 3.5 %
$ 2147/MT
- Density: 1.30 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 150000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.014 - 0.016 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.015 - 0.017 cm/cm @Thickness 3.18 mm
$ 1708/MT
- Density: 1.30 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 150000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.014 - 0.016 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.015 - 0.017 cm/cm @Thickness 3.18 mm
$ 1769/MT
- Density: 1.30 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Melt Flow: 36 g/10 min @Load 2.16 kg, Temperature 400 °C
- Tensile Strength: 100 MPa
- Elongation at Yield: 5.2 %
$ 2047/MT
- Density: 1.30 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 440000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.011 - 0.013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 - 0.015 cm/cm
$ 1634/MT
- Density: 1.53 g/cc
- Filler Content: 30 %
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 350000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm
$ 1676/MT
- Density: 1.34 g/cc
- Water Absorption: 0.050 % @Time 86400 sec
- Melt Flow: 45 g/10 min @Load 5.00 kg, Temperature 316 °C
- Tensile Stress: 75.0 MPa
- Elongation at Break: 6.0 %
$ 1499/MT
- Density: 1.70 g/cc
- Melting Point: 169 °C
- FDA: Yes
- Agency Ratings: EU 10/2011; FDA 21 CFR 177.1990
- Availability: Asia Pacific
$ 2578/MT
- Water Absorption: 0.17 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Tensile Stress: 130 MPa
- Elongation at Break: 2.4 %
$ 1444/MT
- Density: 1.49 g/cc
- Filler Content: 20 %
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Tensile Strength: 120 MPa
$ 2069/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 42 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 88.9 MPa
$ 1552/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Melt Flow: <= 2.0 g/10 min @Load 21.6 kg, Temperature 230 °C
- Tensile Strength at Break: 25.0 - 50.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 53.0 - 57.0 MPa @Thickness 2.00 mm
$ 1947/MT
- Density: 1.55 g/cc
- Filler Content: 50 %
- Water Absorption: 0.17 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0027 cm/cm
$ 2319/MT
- Density: 1.45 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: 210 MPa
- Elongation at Break: 2.3 %
- Tensile Modulus: 11.9 GPa
$ 1650/MT
- Water Absorption: 0.090 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0058 cm/cm
- Tensile Strength, Yield: 230 MPa
- Elongation at Break: 3.8 %
$ 1848/MT
- Density: 1.43 g/cc
- Filler Content: 30 %
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0040 cm/cm
- Tensile Strength at Break: 190 MPa
$ 1601/MT
- Density: 1.64 g/cc
- Filler Content: 50 %
- Tensile Strength at Break: 260 MPa
- Elongation at Break: 2.2 %
- Tensile Modulus: 20.0 GPa
$ 1697/MT
- Density: 1.64 g/cc
- Filler Content: 50 %
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 280 MPa
$ 1626/MT
- Density: 1.61 g/cc
- Filler Content: 50 %
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 230 MPa
$ 1505/MT
- Density: 1.64 g/cc
- Filler Content: 50 %
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 235 MPa
$ 1715/MT
- Density: 1.77 g/cc
- Filler Content: 60 %
- Water Absorption: 0.13 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 280 MPa
$ 1531/MT
- Density: 1.60 g/cc
- Filler Content: 50 %
- Tensile Strength, Yield: 200 MPa
- Elongation at Break: 2.7 %
- Tensile Modulus: 16.0 GPa
$ 1587/MT
- Density: 1.74 g/cc
- Filler Content: 55 %
- Water Absorption: 0.19 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0040 cm/cm
- Tensile Strength at Break: 140 MPa
$ 2404/MT
- Density: 1.34 g/cc
- Filler Content: 30 %
- Water Absorption: 0.22 % @Time 86400 sec
- Water Absorption at Saturation: 2.0 %
- Linear Mold Shrinkage, Flow: 0.00030 - 0.0010 cm/cm
$ 2515/MT
- Density: 1.12 g/cc
- Apparent Bulk Density: 0.700 g/cc
- Tensile Strength at Break: 39.9 MPa
- Tensile Strength, Yield: 63.4 MPa
- Tensile Strength, Yield: 63.8 MPa
$ 1659/MT
- Density: 1.64 g/cc
- Filler Content: 50 %
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 280 MPa
$ 1534/MT
- Density: 1.64 g/cc
- Filler Content: 50 %
- Tensile Strength at Break: 260 MPa
- Elongation at Break: 2.2 %
- Tensile Modulus: 19.5 GPa
$ 1834/MT
- Density: 1.64 g/cc
- Filler Content: 50 %
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 280 MPa
$ 1938/MT
- Density: 1.64 g/cc
- Filler Content: 50 %
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 280 MPa
$ 1761/MT
- Density: 1.68 g/cc
- Filler Content: 50 %
- Water Absorption: 0.30 % @Time 86400 sec
- Water Absorption at Saturation: 1.0 %
- Water Absorption at Saturation: 1.3 %
$ 1828/MT
- Mooney Viscosity: 30 @Temperature 121 °C
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 2217/MT
- Density: 1.30 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Thickness: 50.0 microns
- Film Tensile Strength at Yield, MD: 71.7 MPa
- Film Tensile Strength at Yield, TD: 68.9 MPa
$ 1965/MT
- Density: 2.16 g/cc
- Melt Flow: 10 - 17 g/10 min @Load 5.00 kg, Temperature 372 °C
- Melting Point: 280 - 290 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 1775/MT
- Density: 1.68 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1970/MT
- Density: 1.42 g/cc
- Filler Content: 15 %
- Water Absorption: 0.010 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm @Thickness 3.20 mm
$ 1589/MT
- Density: 1.47 g/cc
- Filler Content: 33 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Compressive Strength: 172 MPa
$ 1913/MT
- Density: 1.48 g/cc
- Filler Content: 33 %
- Water Absorption: 0.23 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
$ 1504/MT
- Density: 1.68 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1957/MT
- Drying Temperature: 177 °C @Time 10800 sec
- Availability: Africa & Middle East
- Availability: Asia Pacific
- Availability: Europe
- Availability: Latin America
$ 2246/MT
- Drying Temperature: 177 °C @Time 10800 sec
- Availability: Africa & Middle East
- Availability: Asia Pacific
- Availability: Europe
- Availability: Latin America
$ 2572/MT
- Tensile Strength at Break: 49.0 - 54.0 MPa
- Tensile Strength, Yield: 22.0 - 28.0 MPa
- Elongation at Break: 400 - 600 %
- Elongation at Yield: 9.0 - 12 %
- Tensile Modulus: 0.550 - 0.850 GPa
$ 2045/MT
- Mooney Viscosity: 35 @Temperature 121 °C
- FDA: Yes
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Compounding
$ 1806/MT
- Density: 1.49 g/cc
- Filler Content: 33 %
- Water Absorption: 0.19 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
$ 1664/MT
- Density: 1.45 g/cc
- Filler Content: 33 %
- Water Absorption: 0.21 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1560/MT
- Mooney Viscosity: 24 @Temperature 121 °C
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
- Processing Technique: Calendering; Compounding; Extrusion
- Processing Technique: Injection Molding; Resin Transfer Molding
$ 2219/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1533/MT
- Density: 1.60 g/cc
- Filler Content: 22 %
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1767/MT
- Density: 1.60 g/cc
- Filler Content: 22 %
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1585/MT
- Density: 1.46 g/cc
- Water Absorption: 0.030 % @Time 86400 sec
- Viscosity: 240000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.017 - 0.019 cm/cm @Thickness 3.18 mm
$ 1804/MT
- Mooney Viscosity: 47 @Temperature 121 °C
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 2495/MT
- Density: 1.19 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Melt Flow: 8.0 g/10 min @Load 5.00 kg, Temperature 380 °C
- Tensile Strength: 152 MPa
- Elongation at Break: 10 %
$ 1742/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Melt Flow: 2.8 - 4.6 g/10 min @Load 21.6 kg, Temperature 230 °C
- Tensile Strength at Break: 35.0 - 50.0 MPa @Thickness 2.00 mm
- Tensile Strength, Yield: 53.0 - 57.0 MPa @Thickness 2.00 mm
$ 1724/MT
- Mooney Viscosity: 41 @Temperature 121 °C
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
- Processing Technique: Calendering; Compounding; Compression Molding
- Processing Technique: Extrusion; Resin Transfer Molding
$ 2176/MT
- Density: 1.11 g/cc
- Water Absorption: 0.75 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.017 - 0.022 cm/cm
- Linear Mold Shrinkage, Transverse: 0.019 - 0.021 cm/cm
- Tensile Strength at Break: 62.1 MPa
$ 1887/MT
- Melting Point: 325 - 335 °C
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1557/MT
- Density: 1.26 g/cc
- Filler Content: 25 %
- Water Absorption: 0.25 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 2339/MT
- Density: 1.44 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 4.5 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 50
- Tensile Strength at Break: 12.5 MPa
$ 1659/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.020 - 0.030 cm/cm
- Melt Flow: 4.0 - 8.0 g/10 min @Load 5.00 kg, Temperature 230 °C
- Hardness, Shore D: 73 - 80
$ 1572/MT
- Density: 1.94 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell M: 101
$ 1495/MT
- Density: 0.900 g/cc
- Melt Flow: 0.70 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore D: 23
- Tensile Strength at Break: 12.0 MPa
- Elongation at Break: 500 %
$ 1990/MT
- Density: 1.68 g/cc
- Filler Content: 22 %
- Tensile Strength: 95.1 MPa
- Tensile Stress: 102 MPa
- Elongation at Break: 1.1 %
$ 1535/MT
- Density: 1.55 g/cc
- Filler Content: 45 %
- Water Absorption: 0.21 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
$ 1878/MT
- Density: 0.902 g/cc
- Melt Flow: 0.45 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 84
- Hardness, Shore D: 26
- Tensile Strength at Break: 18.0 MPa
$ 1631/MT
- Water Vapor Transmission: 150 g/m²/day @Thickness 0.00100 mm, Temperature 38.0 °C
- Oxygen Transmission Rate: 250 cc/m²/day @Thickness 0.00100 mm
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Asia Pacific
- Availability: Europe
$ 2066/MT
- Water Vapor Permeability: 63.0 g mil/ (m day) @Pressure 0.101 MPa
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Thickness: 50.0 microns
- Film Elongation at Break, MD: 280 %
$ 2055/MT
- Density: 1.60 g/cc
- Filler Content: 30 %
- Water Absorption: <= 0.10 % @Time 86400 sec
- Tensile Strength: 135 MPa
- Elongation at Break: 1.6 %
$ 1465/MT
- Density: 1.45 g/cc
- Density: 1.45 g/cc
- Filler Content: 33 %
- Water Absorption: 0.29 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
$ 1480/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 75 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 88.9 MPa
$ 1502/MT
- Density: 1.45 g/cc
- Filler Content: 33 %
- Water Absorption: 0.29 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
$ 1753/MT
- Density: 1.35 g/cc
- Water Absorption at Saturation: 0.050 %
- Melt Flow: 170 g/10 min @Load 5.00 kg, Temperature 316 °C
- Tensile Strength: 85.0 MPa
- Elongation at Break: 10 %
$ 1487/MT
- Tensile Strength at Break: 14.5 MPa
- Elongation at Break: >= 210 %
- Tensile Modulus: 0.600 GPa
- Specific Heat Capacity: 0.900 - 1.10 J/g-°C
- Thermal Conductivity: 0.200 W/m-K @Temperature 40.0 °C
$ 1576/MT
- Mooney Viscosity: 57 @Temperature 121 °C
- Additive: Processing Aid
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
$ 1558/MT
- Density: 1.30 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 400 °C
- Hardness, Rockwell M: 92
- Tensile Strength: 92.0 MPa
$ 1748/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 88.9 MPa
$ 1773/MT
- Tensile Strength at Break: >= 22.0 MPa
- Elongation at Break: >= 200 %
- Melting Point: 255 - 270 °C
- Volume Resistivity: 1000 - 1.00e+8 ohm-cm
- Surface Resistance: 100 - 1.00e+6 ohm
$ 1561/MT
- Density: 1.75 - 1.77 g/cc
- Water Absorption at Saturation: 0.020 %
- Viscosity: 2.90e+6 - 3.30e+6 cP
- Specific Heat Capacity: 1.30 J/g-°C
- Melting Point: 160 °C
$ 2449/MT
- Mooney Viscosity: 45 @Temperature 121 °C
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
- Processing Technique: Calendering; Compounding; Compression Molding
- Processing Technique: Extrusion; Resin Transfer Molding
$ 1494/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 2021/MT
- Density: 1.99 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell M: 101
$ 2223/MT
- Melt Flow: 25 g/10 min
- Tensile Strength at Break: 49.0 - 54.0 MPa
- Tensile Strength, Yield: 22.0 - 28.0 MPa
- Elongation at Break: 400 - 600 %
- Elongation at Yield: 9.0 - 12 %
$ 2298/MT
- Density: 1.52 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 5.1 g/10 min @Load 21.6 kg, Temperature 150 °C
- Hardness, Shore D: 53
- Tensile Strength at Break: 12.5 MPa
$ 2152/MT
- Density: 1.24 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Melt Flow: 6.5 g/10 min @Load 2.16 kg, Temperature 343 °C
- Tensile Strength: 70.3 MPa
$ 1575/MT
- Density: 1.24 g/cc
- Melt Flow: 15 g/10 min @Load 5.00 kg, Temperature 380 °C
- Tensile Strength, Yield: 115 MPa
- Elongation at Break: 15 %
- Tensile Modulus: 3.90 GPa
$ 1520/MT
- Density: 1.61 g/cc
- Filler Content: 45 %
- Tensile Strength, Yield: 232 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 15.1 GPa
$ 1891/MT
- Density: 1.45 g/cc
- Density: 1.45 g/cc
- Filler Content: 33 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
$ 1688/MT
- Melting Point: 325 - 335 °C
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 2212/MT
- Melting Point: 330 - 340 °C
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1512/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Linear Mold Shrinkage, Flow: 0.025 cm/cm
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 275 °C
- Hardness, Rockwell R: 90
$ 1643/MT
- Mooney Viscosity: 35 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1602/MT
- Density: 1.95 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell M: 101
$ 1883/MT
- Density: 1.68 g/cc
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 275 °C
- Melting Point: 225 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 1482/MT
- Mooney Viscosity: 45 @Temperature 121 °C
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1687/MT
- Density: 1.35 g/cc
- Filler Content: 25 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Flexural Yield Strength: 200 MPa
$ 2223/MT
- Water Vapor Transmission: 160 g/m²/day @Thickness 0.00100 mm, Temperature 38.0 °C
- Glass Transition Temp, Tg: 7.00 °C
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Asia Pacific
- Availability: Europe
$ 1776/MT
- Density: 1.46 g/cc
- Filler Content: 33 %
- Water Absorption: 0.28 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0032 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
$ 1648/MT
- Mooney Viscosity: 35 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1491/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Linear Mold Shrinkage, Flow: 0.025 cm/cm
- Melt Flow: 2.0 - 12 g/10 min @Load 2.16 kg, Temperature 275 °C
- Hardness, Rockwell R: 90
$ 1505/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.020 - 0.030 cm/cm
- Melt Flow: 16 - 26 g/10 min @Load 3.80 kg, Temperature 230 °C
- Melt Flow: 20 - 38 g/10 min @Load 5.00 kg, Temperature 230 °C
$ 1687/MT
- Density: 1.24 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Tensile Strength at Break: 70.3 MPa
- Elongation at Break: 50 - 100 %
- Tensile Modulus: 2.48 GPa
$ 1795/MT
- Density: 1.24 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Melt Flow: 6.5 g/10 min @Load 2.16 kg, Temperature 343 °C
- Tensile Strength: 70.3 MPa
$ 1458/MT
- Density: 1.55 g/cc
- Filler Content: 30 %
- Water Absorption: 0.20 % @Time 86400 sec
- Viscosity: 650000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm
$ 2397/MT
- Mooney Viscosity: 60 @Temperature 121 °C
- Additive: Processing Aid
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
$ 2029/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1532/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1666/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1481/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1605/MT
- Density: 1.50 g/cc
- Filler Content: 22 %
- Water Absorption: 0.24 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1837/MT
- Density: 1.95 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell M: 101
$ 2455/MT
- Density: 1.42 g/cc
- Filler Content: 30 %
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 790000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.00 - 0.0020 cm/cm @Thickness 3.18 mm
$ 2337/MT
- Density: 1.80 g/cc
- Filler Content: 60 %
- Tensile Strength at Break: 280 MPa
- Elongation at Break: 1.9 %
- Tensile Modulus: 23.3 GPa
$ 1740/MT
- Density: 1.34 g/cc
- Water Absorption: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.010 cm/cm @Thickness 3.18 mm
- Melt Flow: 100 g/10 min @Load 5.00 kg, Temperature 316 °C
- Tensile Stress: 80.0 MPa
$ 1691/MT
- Density: 1.45 g/cc
- Filler Content: 33 %
- Water Absorption: 0.23 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
$ 2095/MT
- Mooney Viscosity: 48 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1627/MT
- Density: 1.81 g/cc
- Mooney Viscosity: 31 - 61 @Temperature 121 °C
- Hardness, Shore A: 76
- Tensile Strength: 18.4 MPa
- Elongation at Break: 170 %
$ 1490/MT
- Density: 1.18 g/cc
- Melting Point: 242 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
- Availability: Europe
$ 1523/MT
- Mooney Viscosity: 24 @Temperature 121 °C
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
- Processing Technique: Calendering; Compounding; Extrusion
- Processing Technique: Injection Molding; Resin Transfer Molding
$ 1630/MT
- Density: 0.872 g/cc
- Melt Flow: 1.1 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore D: 16
- Tensile Strength at Break: 7.70 MPa
- Elongation at Break: 400 %
$ 1990/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Linear Mold Shrinkage, Flow: 0.025 cm/cm
- Melt Flow: 430 - 550 g/10 min @Load 2.16 kg, Temperature 275 °C
- Hardness, Rockwell R: 73
$ 1472/MT
- Density: 1.76 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Viscosity: 2.60e+6 cP @Shear Rate 100 1/s, Temperature 232 °C
- Melt Flow: 10 g/10 min @Load 21.6 kg, Temperature 230 °C
- Hardness, Shore D: 75
$ 1502/MT
- Density: 1.57 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Compressive Strength: 172 MPa
$ 1604/MT
- Density: 2.11 - 2.16 g/cc
- Melt Flow: 8.0 - 18 g/10 min @Load 5.00 kg, Temperature 372 °C
- Hardness, Shore D: 55 - 60
- Tensile Strength at Break: >= 25.0 MPa
- Elongation at Break: >= 300 %
$ 1508/MT
- Density: 2.16 g/cc
- Melt Flow: 10 - 17 g/10 min @Load 5.00 kg, Temperature 372 °C
- Melting Point: 300 - 310 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 1894/MT
- Density: 1.86 g/cc
- Filler Content: 50 %
- Tensile Strength at Break: 122 MPa
- Elongation at Break: 1.2 %
- Tensile Modulus: 17.9 GPa
$ 1562/MT
- Density: 1.62 g/cc
- Filler Content: 15 %
- Water Absorption: 0.048 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0039 cm/cm
- Linear Mold Shrinkage, Transverse: 0.012 cm/cm
$ 1642/MT
- Density: 2.16 g/cc
- Melt Flow: 10 - 17 g/10 min @Load 5.00 kg, Temperature 372 °C
- Melting Point: 280 - 290 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 1647/MT
- Density: 1.68 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Tensile Strength: 200 MPa
- Elongation at Break: 1.8 %
- Flexural Strength: 290 MPa
$ 1450/MT
- Density: 1.68 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 2170/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Linear Mold Shrinkage, Flow: 0.025 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 275 °C
- Hardness, Rockwell R: 90
$ 1579/MT
- Density: 1.95 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell M: 99
$ 2067/MT
- Density: 1.69 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1870/MT
- Density: 1.49 g/cc
- Filler Content: 35 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Tensile Strength at Break: 205 MPa
$ 1986/MT
- Mooney Viscosity: 9.0 @Temperature 121 °C
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
- Processing Technique: Calendering; Compounding; Extrusion
- Processing Technique: Injection Molding; Resin Transfer Molding
$ 1695/MT
- Density: 1.58 g/cc
- Filler Content: 50 %
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0014 cm/cm
$ 1797/MT
- Density: 1.59 g/cc
- Melting Point: 260 °C
- Rear Barrel Temperature: 250 °C
- Front Barrel Temperature: 285 °C
- Melt Temperature: 275 - 290 °C
$ 1728/MT
- Density: 1.60 g/cc
- Filler Content: 50 %
- Water Absorption: 0.37 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0013 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0032 cm/cm
$ 1468/MT
- Melting Point: 158 °C
- Agency Ratings: EC 1907/2006 (REACH); EU 10/2011
- Availability: Asia Pacific
- Availability: Europe
- Availability: Latin America
$ 1902/MT
- Density: 1.80 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm
- Tensile Strength at Break: 193 MPa
$ 2439/MT
- Density: 1.68 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 2434/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
$ 1470/MT
- FDA: Yes
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Europe
- Color: Milky White
- Form: Liquid
$ 1488/MT
- Density: 1.51 g/cc
- Filler Content: 30 %
- Water Absorption: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm @Thickness 3.20 mm
$ 1807/MT
- Density: 1.24 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Melt Flow: 3.0 - 5.0 g/10 min @Load 2.16 kg, Temperature 343 °C
- Tensile Strength at Break: 70.3 MPa
$ 2406/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
$ 1786/MT
- Mooney Viscosity: 21 @Temperature 121 °C
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1559/MT
- Density: 1.45 g/cc
- Filler Content: 33 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength: 172 MPa
$ 1463/MT
- Density: 1.34 g/cc
- Water Absorption: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.010 cm/cm @Thickness 3.18 mm
- Melt Flow: 100 g/10 min @Load 5.00 kg, Temperature 316 °C
- Tensile Stress: 80.0 MPa
$ 1906/MT
- Density: 1.35 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Thickness: 75.0 microns
- Film Elongation at Break, MD: 25 %
- Film Elongation at Yield, MD: 3.5 %
$ 1747/MT
- Density: 1.35 g/cc
- Melt Flow: 22 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength, Yield: 74.5 MPa
- Elongation at Break: 30 - 50 %
- Tensile Modulus: 2.28 GPa
$ 2118/MT
- Density: 1.37 g/cc
- Water Absorption: 0.60 % @Time 86400 sec
- Viscosity: 800 cP
- CTE, linear, Parallel to Flow: 49.0 µm/m-°C
- Glass Transition Temp, Tg: 220 °C
$ 1897/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 88.9 MPa
$ 1696/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 75 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 88.9 MPa
$ 1502/MT
- Density: 1.60 g/cc
- Filler Content: 50 %
- Water Absorption: 0.27 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
$ 1580/MT
- Density: 1.63 g/cc
- Filler Content: 15 %
- Water Absorption: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0052 cm/cm
- Linear Mold Shrinkage, Transverse: 0.013 cm/cm
$ 1480/MT
- Coefficient of Friction, Dynamic: 0.30
- FDA: Yes
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Asia Pacific
- Availability: Europe
$ 1483/MT
- Density: 1.29 g/cc
- Water Absorption: 0.37 % @Time 86400 sec
- Water Absorption at Saturation: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Thickness 3.18 mm
- Melt Flow: 12 - 17 g/10 min @Load 5.00 kg, Temperature 365 °C
$ 2110/MT
- Density: 1.64 g/cc
- Filler Content: 50 %
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 280 MPa
$ 1566/MT
- Density: 1.69 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1870/MT
- Density: 1.84 g/cc
- Filler Content: 65 %
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
$ 1947/MT
- Density: 1.93 g/cc
- Glass Transition Temp, Tg: 125 °C
- Refractive Index: 1.327
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 1601/MT
- Density: 1.69 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1459/MT
- Density: 1.34 g/cc
- Water Absorption: 0.050 % @Time 86400 sec
- Melt Flow: 45 g/10 min @Load 5.00 kg, Temperature 316 °C
- Tensile Stress: 75.0 MPa
- Elongation at Break: 6.0 %
$ 1542/MT
- Density: 1.32 g/cc
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 450000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0080 - 0.010 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.012 - 0.014 cm/cm @Thickness 3.18 mm
$ 1497/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Latex
$ 1852/MT
- Density: 1.47 g/cc
- Water Absorption: 0.030 % @Time 86400 sec
- Viscosity: 270000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.016 - 0.018 cm/cm @Thickness 3.18 mm
$ 1651/MT
- Mooney Viscosity: 41 @Temperature 121 °C
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 2140/MT
- Density: 1.90 g/cc
- Filler Content: 65 %
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
$ 1965/MT
- Mooney Viscosity: 66 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 2208/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Thickness: 50.0 microns
- Film Tensile Strength at Yield, MD: 71.3 MPa
- Film Tensile Strength at Yield, TD: 71.4 MPa
$ 1620/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Linear Mold Shrinkage, Flow: 0.025 cm/cm
- Melt Flow: 3.0 - 6.0 g/10 min @Load 2.16 kg, Temperature 275 °C
- Hardness, Rockwell R: 90
$ 2014/MT
- Density: 1.32 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Viscosity: 500000 cP
- Tensile Strength: 94.0 MPa
- Elongation at Break: 35 %
$ 1564/MT
- Density: 1.80 - 1.82 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Melt Flow: 2.0 - 4.5 g/10 min @Load 10.0 kg, Temperature 230 °C
- Tensile Strength at Break: 30.0 - 40.0 MPa @Thickness 1.50 mm
- Tensile Strength, Yield: 30.0 - 40.0 MPa @Thickness 1.50 mm
$ 1814/MT
- Density: 1.64 g/cc
- Filler Content: 50 %
- Tensile Strength at Break: 260 MPa
- Elongation at Break: 2.2 %
- Tensile Modulus: 19.5 GPa
$ 1551/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 88.9 MPa
$ 1617/MT
- Density: 1.57 g/cc
- Filler Content: 40 %
- Water Absorption: 0.15 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0034 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0068 cm/cm
$ 1720/MT
- Melting Point: 320 - 330 °C
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1532/MT
- Density: 0.872 g/cc
- Melt Flow: 1.5 g/10 min
- Tensile Strength: >= 20.0 MPa
- Elongation at Break: >= 400 %
- Tensile Modulus: 0.00600 GPa
$ 2261/MT
- Density: 1.68 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1506/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.020 - 0.030 cm/cm
- Melt Flow: 4.0 - 6.0 g/10 min @Load 10.0 kg, Temperature 230 °C
- Hardness, Shore D: 72 - 78
$ 2221/MT
- Density: 1.54 g/cc
- Filler Content: 40 %
- Linear Mold Shrinkage, Flow: 0.0016 - 0.0018 cm/cm @Thickness 1.00 mm
- Linear Mold Shrinkage, Flow: 0.0021 - 0.0025 cm/cm @Thickness 2.00 mm
- Linear Mold Shrinkage, Transverse: 0.0048 - 0.0054 cm/cm @Thickness 2.00 mm
$ 1629/MT
- Density: 1.68 g/cc
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 275 °C
- Melting Point: 227 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 2470/MT
- Mooney Viscosity: 22 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 2332/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 2299/MT
- Density: 0.950 g/cc
- Melt Flow: 0.50 g/10 min
- Tensile Strength: >= 20.0 MPa
- Elongation at Break: >= 350 %
- Tensile Modulus: 1.10 GPa
$ 1477/MT
- Mooney Viscosity: 62 @Temperature 121 °C
- FDA: Yes
- Agency Ratings: FDA 21 CFR 177.2600
- Availability: Europe; North America
- Color: Translucent
$ 1928/MT
- Density: 1.46 g/cc
- Filler Content: 33 %
- Water Absorption: 0.26 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
$ 1955/MT
- Density: 1.78 g/cc
- Filler Content: 50 %
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 265 MPa
$ 1858/MT
- Density: 1.53 g/cc
- Filler Content: 30 %
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 60000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.18 mm
$ 1704/MT
- Density: 1.35 g/cc
- Water Absorption at Saturation: 0.050 %
- Melt Flow: 170 g/10 min @Load 5.00 kg, Temperature 316 °C
- Tensile Strength: 85.0 MPa
- Elongation at Break: 10 %
$ 1966/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 2268/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
$ 1666/MT
- Density: 1.68 g/cc
- Filler Content: 50 %
- Flexural Strength: 240 MPa
- Flexural Modulus: 15.5 GPa
- Rear Barrel Temperature: 250 - 260 °C
$ 1527/MT
- Density: 1.68 g/cc
- Filler Content: 50 %
- Tensile Strength at Break: 280 MPa
- Elongation at Break: 2.1 %
- Tensile Modulus: 19.8 GPa
$ 1730/MT
- Water Vapor Transmission: 16.0 g/m²/day @Thickness 0.00100 mm, Temperature 38.0 °C
- Coefficient of Friction, Dynamic: 0.21
- FDA: Yes
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Asia Pacific
$ 2154/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1476/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 58 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 88.9 MPa
$ 1962/MT
- Water Vapor Transmission: 14.0 g/m²/day @Thickness 0.00100 mm, Temperature 38.0 °C
- Coefficient of Friction, Dynamic: 0.30
- FDA: Yes
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Asia Pacific
$ 1507/MT
- Density: 2.17 g/cc
- Apparent Bulk Density: 0.410 g/cc
- Water Absorption: 0.00 %
- Particle Size: 15 µm
- Linear Mold Shrinkage: 0.030 cm/cm
$ 1677/MT
- Density: 0.920 g/cc
- Melt Flow: 0.70 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore D: 51
- Tensile Strength at Break: 21.6 MPa
- Elongation at Break: 500 %
$ 1502/MT
- Density: 0.944 g/cc
- Melt Flow: 0.50 g/10 min
- Tensile Strength: >= 20.0 MPa
- Elongation at Break: >= 350 %
- Tensile Modulus: 0.670 GPa
$ 1910/MT
- Mooney Viscosity: 20 @Temperature 121 °C
- Additive: Processing Aid
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
$ 1606/MT
- Density: 1.58 g/cc
- Filler Content: 30 %
- Water Absorption: 0.40 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Melt Flow: 4.5 g/10 min @Load 2.16 kg, Temperature 343 °C
$ 2164/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Linear Mold Shrinkage, Flow: 0.025 cm/cm
- Melt Flow: 19 g/10 min @Load 2.16 kg, Temperature 275 °C
- Hardness, Rockwell R: 90
$ 1576/MT
- Density: 1.75 g/cc
- Filler Content: 50 %
- Water Absorption: 0.15 % @Time 86400 sec
- Linear Mold Shrinkage: 0.0010 - 0.0030 cm/cm
- Tensile Strength at Break: 230 MPa
$ 1888/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage, Flow: 0.020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.021 cm/cm
- Tensile Strength: 76.5 MPa
- Elongation at Break: 100 %
$ 1612/MT
- Density: 1.77 g/cc
- Filler Content: 60 %
- Tensile Strength at Break: 250 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 23.0 GPa
$ 2336/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1993/MT
- Density: 0.900 g/cc
- Melt Flow: 0.35 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore A: 88
- Hardness, Shore D: 30
- Tensile Strength at Break: 17.0 MPa
$ 1592/MT
- Density: 1.57 g/cc
- Filler Content: 45 %
- Water Absorption: 0.37 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
$ 1485/MT
- Density: 0.940 g/cc
- Melt Flow: 0.44 g/10 min @Load 5.00 kg, Temperature 190 °C
- Tensile Strength at Break: 21.5 MPa
- Elongation at Break: 420 %
- Volume Resistivity: 1.40e+15 ohm-cm @Temperature 90.0 °C
$ 2202/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Latex
$ 1528/MT
- Density: 1.58 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage, Flow: 0.0012 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0028 cm/cm
- Tensile Strength, Yield: 190 MPa
$ 1815/MT
- Viscosity: 80 cP
- Tensile Strength: 90.0 MPa
- Elongation at Yield: 6.5 %
- Tensile Modulus: 2.70 GPa
- Flexural Strength: 2.60 MPa
$ 2108/MT
- Density: 1.65 g/cc
- Filler Content: 50 %
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0070 cm/cm
- Tensile Strength at Break: 275 MPa
$ 1839/MT
- Mooney Viscosity: 75 @Temperature 121 °C
- FDA: Yes
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Compounding
$ 1580/MT
- Density: 1.60 g/cc
- Filler Content: 50 %
- Water Absorption: 0.27 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
$ 1470/MT
- Density: 1.68 g/cc
- Melt Flow: 1.0 g/10 min @Load 2.16 kg, Temperature 275 °C
- Melting Point: 242 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 1541/MT
- Density: 1.24 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 343 °C
- Tensile Strength: 70.3 MPa
$ 1739/MT
- Melt Flow: 5000 g/10 min @Load 5.00 kg, Temperature 315 °C
- Availability: Asia Pacific
- Availability: Europe
- Availability: Latin America
- Availability: North America
$ 1786/MT
- Mooney Viscosity: 25 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1447/MT
- Density: 1.84 g/cc
- Filler Content: 65 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
- Tensile Strength: 175 MPa
$ 1904/MT
- Melt Flow: 5000 g/10 min @Load 5.00 kg, Temperature 315 °C
- Availability: Asia Pacific
- Availability: Europe
- Availability: Latin America
- Availability: North America
$ 1447/MT
- Density: 1.37 g/cc
- Water Absorption: 0.60 % @Time 86400 sec
- Viscosity: 370 cP
- CTE, linear, Parallel to Flow: 49.0 µm/m-°C
- Glass Transition Temp, Tg: 220 °C
$ 1805/MT
- Density: 1.68 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Tensile Strength: 195 MPa
- Elongation at Break: 1.6 %
- Flexural Strength: 280 MPa
$ 1506/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.020 - 0.030 cm/cm
- Melt Flow: 3.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 47
$ 1814/MT
- Melting Point: 325 - 335 °C
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 2143/MT
- Mooney Viscosity: 41 @Temperature 121 °C
- Additive: Processing Aid
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
$ 1475/MT
- Glass Transition Temp, Tg: 13.0 °C
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Asia Pacific
- Availability: Europe
- Availability: Latin America
$ 2299/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Linear Mold Shrinkage, Flow: 0.025 cm/cm
- Melt Flow: 4.0 g/10 min @Load 2.16 kg, Temperature 275 °C
- Hardness, Rockwell R: 90
$ 1908/MT
- Density: 1.48 g/cc
- Filler Content: 22 %
- Water Absorption: 0.24 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 2125/MT
- Density: 1.49 g/cc
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Melt Flow: 6.5 g/10 min @Load 2.16 kg, Temperature 343 °C
- Tensile Strength: 108 MPa
- Elongation at Break: 2.0 %
$ 2440/MT
- Density: 1.29 g/cc
- Water Absorption: 0.37 % @Time 86400 sec
- Water Absorption at Saturation: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Thickness 3.18 mm
- Melt Flow: 34 - 40 g/10 min @Load 5.00 kg, Temperature 365 °C
$ 2385/MT
- Density: 1.30 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Thickness: 25.0 microns
- Film Tensile Strength at Yield, MD: 75.8 MPa
- Film Tensile Strength at Yield, TD: 72.4 MPa
$ 1643/MT
- Density: 1.59 g/cc
- Filler Content: 22 %
- Water Absorption: 0.19 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1483/MT
- Density: 1.52 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 5.1 g/10 min @Load 21.6 kg, Temperature 150 °C
- Hardness, Shore D: 53
- Tensile Strength at Break: 12.3 MPa
$ 1914/MT
- Density: 1.28 g/cc
- Filler Content: 16 %
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
- Tensile Strength: 131 MPa
$ 2132/MT
- Mooney Viscosity: 23 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 2230/MT
- Density: 1.22 g/cc
- Filler Content: 15 %
- Water Absorption: 0.20 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.011 cm/cm
$ 1647/MT
- Water Vapor Transmission: 37.0 g/m²/day @Thickness 0.00100 mm, Temperature 38.0 °C
- Coefficient of Friction, Dynamic: 0.35
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Asia Pacific
- Availability: Europe
$ 1543/MT
- Density: 1.28 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 77.2 MPa
$ 2117/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
$ 1486/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Linear Mold Shrinkage, Flow: 0.025 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 275 °C
- Hardness, Rockwell R: 90
$ 1560/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Thickness: 25.0 microns
- Film Tensile Strength at Yield, MD: 55.0 MPa
- Film Tensile Strength at Yield, TD: 56.0 MPa
$ 2347/MT
- Density: 1.68 g/cc
- Melt Flow: 7.0 g/10 min @Load 2.16 kg, Temperature 275 °C
- Melting Point: 225 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 1604/MT
- Density: 1.75 g/cc
- Filler Content: 60 %
- Water Absorption: 0.19 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
$ 1716/MT
- Density: 1.55 g/cc
- Filler Content: 30 %
- Water Absorption: 0.20 % @Time 86400 sec
- Viscosity: 410000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm
$ 1956/MT
- Glass Transition Temp, Tg: 14.0 °C
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Europe
- Color: Milky White
- Form: Liquid
$ 1662/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Melt Flow: 30 - 40 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 73 - 80
- Tensile Strength at Break: 30.0 - 50.0 MPa @Thickness 2.00 mm
$ 1633/MT
- Melting Point: 320 - 330 °C
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1503/MT
- Density: 1.27 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Thickness: 30.0 microns
- Film Tensile Strength at Yield, MD: 103 MPa
- Film Tensile Strength at Yield, TD: 107 MPa
$ 1863/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 30 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 88.9 MPa
$ 1950/MT
- Mooney Viscosity: 40 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 2554/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.020 - 0.030 cm/cm
- Melt Flow: 5.5 - 11 g/10 min @Load 2.16 kg, Temperature 230 °C
- Melt Flow: 16 - 30 g/10 min @Load 5.00 kg, Temperature 230 °C
$ 1985/MT
- Density: 1.36 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Melt Flow: 17 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 86.2 MPa
$ 1702/MT
- Density: 1.43 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 18 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 50
- Tensile Strength at Break: 14.5 MPa
$ 1776/MT
- Density: 1.49 g/cc
- Filler Content: 33 %
- Tensile Strength at Break: 188 MPa
- Elongation at Break: 1.7 %
- Tensile Modulus: 11.2 GPa
$ 1780/MT
- Density: 1.98 g/cc
- Glass Transition Temp, Tg: 90.0 °C
- Refractive Index: 1.331
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 1638/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 2125/MT
- Density: 2.17 g/cc
- Apparent Bulk Density: 0.380 g/cc
- Water Absorption: 0.00 %
- Particle Size: 15 µm
- Linear Mold Shrinkage: 0.030 cm/cm
$ 2196/MT
- Density: 1.37 g/cc
- Water Absorption: 0.60 % @Time 86400 sec
- Viscosity: 1450 cP
- CTE, linear, Parallel to Flow: 49.0 µm/m-°C
- Glass Transition Temp, Tg: 220 °C
$ 1736/MT
- Density: 0.882 g/cc
- Melt Flow: 0.80 g/10 min @Load 2.16 kg, Temperature 190 °C
- Hardness, Shore D: 18
- Tensile Strength at Break: 10.0 MPa
- Elongation at Break: 500 %
$ 1842/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Latex
$ 1746/MT
- Density: 1.59 g/cc
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
- Tensile Strength, Yield: 245 MPa
- Elongation at Break: 2.4 %
$ 1505/MT
- Viscosity: 700 cP
- Tensile Strength: 90.0 MPa
- Elongation at Yield: 6.5 %
- Tensile Modulus: 2.70 GPa
- Flexural Strength: 2.60 MPa
$ 1839/MT
- Melt Flow: 350 g/10 min @Load 5.00 kg, Temperature 315 °C
- Availability: Asia Pacific
- Availability: Europe
- Availability: Latin America
- Availability: North America
$ 1454/MT
- Density: 1.13 g/cc
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Tensile Strength: 62.7 MPa @Temperature 23.0 °C
- Tensile Strength: 96.5 MPa @Temperature -40.0 °C
$ 2542/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Latex
$ 1920/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Latex
$ 1771/MT
- Density: 1.44 g/cc
- Filler Content: 33 %
- Linear Mold Shrinkage, Flow: 0.00 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0020 cm/cm
- Tensile Strength at Break: 193 MPa
$ 1672/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1516/MT
- Density: 1.43 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 6.5 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 49
- Tensile Strength at Break: 12.5 MPa
$ 1661/MT
- Melt Flow: 1.5 - 3.0 g/10 min @Load 5.00 kg, Temperature 372 °C
- Hardness, Shore D: 55 - 60
- Tensile Strength at Break: >= 25.0 MPa
- Tensile Strength at Break: 4.60 MPa @Temperature 280 °C
- Elongation at Break: >= 300 %
$ 1738/MT
- Density: 1.94 g/cc
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell M: 101
$ 2140/MT
- Density: 2.13 - 2.18 g/cc
- Melt Flow: 1.5 - 3.0 g/10 min @Load 5.00 kg, Temperature 372 °C
- Hardness, Shore D: 59
- Tensile Strength at Break: >= 26.0 MPa
- Elongation at Break: >= 300 %
$ 1781/MT
- Density: 1.29 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Viscosity: 410000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.011 - 0.013 cm/cm @Thickness 3.18 mm
$ 1686/MT
- Density: 1.29 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Viscosity: 410000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.011 - 0.013 cm/cm @Thickness 3.18 mm
$ 1527/MT
- Density: 1.29 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Viscosity: 410000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.011 - 0.013 cm/cm @Thickness 3.18 mm
$ 1990/MT
- Density: 1.29 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Viscosity: 410000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.011 - 0.013 cm/cm @Thickness 3.18 mm
$ 2020/MT
- Density: 1.29 g/cc
- Water Absorption: 0.20 % @Time 86400 sec
- Viscosity: 410000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0070 - 0.0090 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.011 - 0.013 cm/cm @Thickness 3.18 mm
$ 2138/MT
- Density: 1.58 g/cc
- Filler Content: 30 %
- Water Absorption: 0.40 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Melt Flow: 4.5 g/10 min @Load 2.16 kg, Temperature 343 °C
$ 1501/MT
- Apparent Bulk Density: 0.300 g/cc
- Melting Point: 328 - 332 °C
- FDA: Yes
- Agency Ratings: FDA 21 CFR 177.1550
- Availability: Asia Pacific
$ 1504/MT
- Density: 1.24 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Thickness 3.18 mm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 343 °C
- Tensile Strength: 75.8 MPa
$ 2253/MT
- Density: 1.30 g/cc
- Water Absorption: 0.37 % @Time 86400 sec
- Thickness: 25.0 microns
- Film Tensile Strength at Yield, MD: 68.0 MPa
- Film Tensile Strength at Yield, TD: 59.0 MPa
$ 1624/MT
- Viscosity: 2.90e+6 - 3.30e+6 cP @Shear Rate 100 1/s, Temperature 232 °C
- Melting Point: 156 - 160 °C
- Availability: Europe; North America
- Color: White
- Form: Latex
- Processing Technique: Coating
$ 2025/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.020 - 0.030 cm/cm
- Melt Flow: 2.5 - 4.0 g/10 min @Load 10.0 kg, Temperature 230 °C
- Hardness, Shore D: 70
$ 1779/MT
- Mooney Viscosity: 35 @Temperature 121 °C
- FDA: Yes
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Compounding
$ 1462/MT
- Density: 1.76 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1635/MT
- Density: 1.90 g/cc
- Filler Content: 65 %
- Linear Mold Shrinkage, Flow: 0.0030 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm
- Tensile Strength: 123 MPa
$ 2199/MT
- Density: 1.44 g/cc
- Filler Content: 33 %
- Water Absorption: 0.21 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
$ 1478/MT
- Mooney Viscosity: 24 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding; Extrusion
- Processing Technique: Injection Molding; Resin Transfer Molding
$ 1703/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Melting Point: 242 °C
- Flammability, UL94: V-0
- Oxygen Index: 52 % @Thickness 1.60 mm
$ 2263/MT
- Density: 1.35 g/cc
- Water Absorption: 0.36 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 - 0.0080 cm/cm
- Melt Flow: 18 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 72.4 MPa
$ 1576/MT
- Density: 1.56 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage, Flow: 0.0010 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0010 cm/cm
- Tensile Strength at Break: 228 MPa
$ 1923/MT
- Density: 1.75 - 1.78 g/cc
- Water Absorption: <= 0.20 % @Time 86400 sec
- Tensile Modulus: 1.00 - 1.50 GPa
- Melting Point: 160 - 168 °C
- Crystallization Temperature: 135 - 140 °C
$ 1690/MT
- Density: 1.45 g/cc
- Filler Content: 33 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Volume Resistivity: 5.00e+14 ohm-cm
$ 1458/MT
- Density: 2.16 g/cc
- Apparent Bulk Density: 0.410 g/cc
- Water Absorption: 0.00 %
- Particle Size: 15 µm
- Linear Mold Shrinkage: 0.031 cm/cm
$ 1907/MT
- Mooney Viscosity: 27 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Compounding; Compression Molding
$ 1464/MT
- Mooney Viscosity: 25 - 45 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1732/MT
- Density: 1.35 g/cc
- Water Absorption: 0.80 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.000090 cm/cm
- Melt Flow: 10 g/10 min @Load 5.00 kg, Temperature 400 °C
- Tensile Strength, Yield: 94.0 MPa
$ 1462/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
$ 1516/MT
- Density: 1.65 g/cc
- Filler Content: 40 %
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 450000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0010 - 0.0030 cm/cm @Thickness 3.18 mm
$ 1507/MT
- Density: 1.61 g/cc
- Filler Content: 45 %
- Tensile Strength, Yield: 232 MPa
- Elongation at Break: 1.8 %
- Tensile Modulus: 15.1 GPa
$ 1552/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 25 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 88.9 MPa
$ 1745/MT
- Density: 1.35 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 4.0 g/10 min @Load 21.6 kg, Temperature 190 °C
- Hardness, Shore D: 36
- Tensile Strength at Break: 12.0 MPa
$ 1553/MT
- Density: 1.36 g/cc
- Water Absorption: 0.30 % @Time 86400 sec
- Melt Flow: 16 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 75.8 MPa
- Elongation at Break: 40 %
$ 1729/MT
- Melting Point: 325 - 335 °C
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1634/MT
- Density: 1.13 g/cc
- Water Absorption: 0.70 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.015 cm/cm
- Linear Mold Shrinkage, Transverse: 0.015 cm/cm
- Hardness, Rockwell R: 120
$ 1639/MT
- Mooney Viscosity: 25 - 45 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1520/MT
- Density: 1.75 - 1.80 g/cc
- Water Absorption: <= 0.040 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.020 - 0.030 cm/cm
- Melt Flow: 3.0 - 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C
- Hardness, Shore D: 53
$ 2473/MT
- Density: 1.66 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1744/MT
- Density: 1.37 g/cc
- Water Absorption: 0.60 % @Time 86400 sec
- CTE, linear, Parallel to Flow: 49.0 µm/m-°C
- Glass Transition Temp, Tg: 220 °C
- Availability: Africa & Middle East
$ 1561/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
$ 1483/MT
- Mooney Viscosity: 27 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding; Extrusion
- Processing Technique: Injection Molding; Resin Transfer Molding
$ 1835/MT
- Density: 1.66 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1744/MT
- Density: 1.68 g/cc
- Water Absorption at Saturation: <= 0.10 %
- Linear Mold Shrinkage, Flow: 0.025 cm/cm
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 275 °C
- Hardness, Rockwell R: 90
$ 2166/MT
- Density: 1.37 g/cc
- Water Absorption: 0.50 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0060 cm/cm
- Melt Flow: 20 g/10 min @Load 2.16 kg, Temperature 380 °C
- Tensile Strength: 88.9 MPa
$ 1826/MT
- Density: 2.13 - 2.18 g/cc
- Melt Flow: 10 - 17 g/10 min @Load 5.00 kg, Temperature 372 °C
- Hardness, Shore D: 55 - 60
- Tensile Strength at Break: >= 21.0 MPa
- Elongation at Break: >= 280 %
$ 2121/MT
- Density: 1.47 g/cc
- Filler Content: 30 %
- Water Absorption: 0.21 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0045 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0089 cm/cm
$ 1664/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1530/MT
- Mooney Viscosity: 44 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 1620/MT
- Density: 1.68 g/cc
- Water Absorption: 0.050 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0040 cm/cm @Thickness 3.20 mm
- Hardness, Rockwell M: 74
$ 1488/MT
- Density: 1.68 g/cc
- Filler Content: 50 %
- Water Absorption: 0.11 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00060 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0018 cm/cm
$ 1590/MT
- Mooney Viscosity: 21 @Temperature 121 °C
- Additive: Processing Aid
- Availability: Europe; North America
- Color: Off-White
- Form: Slab
$ 2112/MT
- Density: 1.51 g/cc
- Environmental Stress Crack Resistance: >= 1000 hour @Thickness 3.00 mm, Temperature 50.0 °C
- Melt Flow: 2.7 g/10 min @Load 21.6 kg, Temperature 150 °C
- Hardness, Shore D: 51
- Tensile Strength at Break: 12.3 MPa
$ 1480/MT
- Density: 1.51 g/cc
- Filler Content: 20 %
- Water Absorption: 0.45 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Melt Flow: 6.0 g/10 min @Load 2.16 kg, Temperature 343 °C
$ 2102/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Latex
$ 2397/MT
- Availability: Asia Pacific
- Availability: Europe
- Availability: North America
- Color: White
- Form: Powder
$ 1472/MT
- Density: 1.42 g/cc
- Filler Content: 30 %
- Water Absorption: 0.10 % @Time 86400 sec
- Viscosity: 470000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.00 - 0.0020 cm/cm @Thickness 3.18 mm
$ 1536/MT
- Density: 1.52 g/cc
- Filler Content: 30 %
- Water Absorption: 0.20 % @Time 86400 sec
- Viscosity: 410000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.0020 - 0.0040 cm/cm @Thickness 3.18 mm
$ 1610/MT
- Density: 1.48 g/cc
- Filler Content: 33 %
- Linear Mold Shrinkage, Flow: 0.0040 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0080 cm/cm
- Tensile Strength: 193 MPa
$ 1684/MT
- Density: 1.29 g/cc
- Water Absorption: 0.37 % @Time 86400 sec
- Water Absorption at Saturation: 1.1 %
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Thickness 3.18 mm
- Melt Flow: 14 - 20 g/10 min @Load 5.00 kg, Temperature 365 °C
$ 2155/MT
- Density: 1.29 g/cc
- Water Absorption: 0.37 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0070 cm/cm @Thickness 3.18 mm
- Melt Flow: 26 - 36 g/10 min @Load 5.00 kg, Temperature 365 °C
- Tensile Strength: 70.3 MPa @Thickness 3.18 mm
$ 2183/MT
- Density: 1.68 g/cc
- Filler Content: 40 %
- Water Absorption: 0.020 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.0050 cm/cm @Thickness 3.20 mm
$ 1653/MT
- Water Vapor Transmission: 11.0 g/m²/day @Thickness 0.00100 mm, Temperature 38.0 °C
- Coefficient of Friction, Dynamic: 0.35
- FDA: Yes
- Agency Ratings: EC 1907/2006 (REACH); EU No 10/2011
- Availability: Asia Pacific
$ 1783/MT
- Density: 1.42 g/cc
- Filler Content: 30 %
- Water Absorption: 0.10 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.00 - 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0040 - 0.0060 cm/cm
$ 1541/MT
- Mooney Viscosity: 21 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding; Extrusion
- Processing Technique: Injection Molding; Resin Transfer Molding
$ 1464/MT
- Viscosity: 800 cP
- Glass Transition Temp, Tg: 220 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
- Availability: Europe
$ 2065/MT
- Density: 1.53 g/cc
- Water Absorption: 0.010 % @Time 86400 sec
- Viscosity: 600000 cP @Shear Rate 1000 1/s, Temperature 400 °C
- Linear Mold Shrinkage, Flow: 0.00 - 0.0020 cm/cm @Thickness 3.18 mm
- Linear Mold Shrinkage, Transverse: 0.012 - 0.014 cm/cm @Thickness 3.18 mm
$ 1534/MT
- Density: 1.55 g/cc
- Filler Content: 30 %
- Tensile Strength at Break: 187 MPa
- Elongation at Break: 2.0 %
- Tensile Modulus: 11.2 GPa
$ 1720/MT
- Density: 1.68 g/cc
- Filler Content: 50 %
- Tensile Strength at Break: 280 MPa
- Elongation at Break: 2.1 %
- Tensile Modulus: 19.8 GPa
$ 1602/MT
- Density: 1.55 g/cc
- Filler Content: 45 %
- Linear Mold Shrinkage, Flow: 0.0050 cm/cm
- Linear Mold Shrinkage, Transverse: 0.010 cm/cm
- Tensile Strength at Break: 186 MPa
$ 1914/MT
- Density: 0.955 g/cc
- Melt Flow: 1.3 g/10 min
- Tensile Strength, Yield: 6.00 MPa @Temperature 100 °C
- Tensile Strength, Yield: 26.0 MPa @Temperature 23.0 °C
- Tensile Strength, Yield: 47.0 MPa @Temperature -40.0 °C
$ 1762/MT
- Density: 1.35 g/cc
- Water Absorption at Saturation: 0.050 %
- Melt Flow: 100 g/10 min @Load 5.00 kg, Temperature 316 °C
- Tensile Strength: 85.0 MPa
- Elongation at Break: 10 %
$ 1551/MT
- Density: 0.942 g/cc
- Melt Flow: 1.6 g/10 min
- Tensile Strength: >= 20.0 MPa
- Elongation at Break: >= 350 %
- Tensile Modulus: 0.570 GPa
$ 2118/MT
- Density: 0.958 g/cc
- Melt Flow: 2.8 g/10 min
- CTE, linear, Parallel to Flow: 150 µm/m-°C @Temperature 20.0 °C
- Specific Heat Capacity: 1.90 J/g-°C
- Thermal Conductivity: 0.460 - 0.480 W/m-K
$ 1629/MT
- Density: 0.957 g/cc
- Melt Flow: 1.2 g/10 min
- Tensile Strength: >= 20.0 MPa
- Elongation at Break: >= 350 %
- Tensile Modulus: 1.30 GPa
$ 2028/MT
- Density: 0.951 g/cc
- Melt Flow: 0.60 g/10 min
- Tensile Strength: >= 20.0 MPa
- Elongation at Break: >= 400 %
- Tensile Modulus: 0.670 GPa
$ 2429/MT
- Density: 1.68 g/cc
- Melt Flow: 2.0 g/10 min @Load 2.16 kg, Temperature 275 °C
- Melting Point: 242 °C
- FDA: Yes
- Agency Ratings: FDA 21 CFR 177.1380(a)(4)
$ 1576/MT
- Density: 1.68 g/cc
- Melt Flow: 12 g/10 min @Load 2.16 kg, Temperature 275 °C
- Melting Point: 225 °C
- Availability: Africa & Middle East
- Availability: Asia Pacific
$ 1488/MT
- Density: 1.75 - 1.77 g/cc
- Water Absorption at Saturation: 0.040 %
- Viscosity: 2.90e+6 - 3.30e+6 cP @Shear Rate 100 1/s, Temperature 232 °C
- Melting Point: 156 - 160 °C
- Gloss: >= 25 %
$ 1520/MT
- Mooney Viscosity: 23 @Temperature 121 °C
- Availability: Europe; North America
- Color: Translucent
- Form: Slab
- Processing Technique: Calendering; Compounding
$ 2338/MT
- Density: 1.54 g/cc
- Filler Content: 33 %
- Water Absorption: 0.16 % @Time 86400 sec
- Linear Mold Shrinkage, Flow: 0.0020 cm/cm
- Linear Mold Shrinkage, Transverse: 0.0060 cm/cm
$ 1721/MT
- Density: 1.55 g/cc
- Filler Content: 40 %
- Tensile Strength at Break: 240 MPa
- Elongation at Break: 2.2 %
- Tensile Modulus: 15.3 GPa
Delivery Polymer Solvay Specialty Polymers
Below is a port-to-port container shipping rates chart for cost ranges of common international shipping destinations (from Saudi Arabia, Germany, China):| Country | 20’ Container | 40’ Container | 5,000 MT |
|---|---|---|---|
| 🇦🇺 Australia | $3345 | $4181 | $401400 |
| 🇦🇹 Austria | $2825 | $3531 | $339000 |
| 🇦🇿 Azerbaijan | $2625 | $3281 | $315000 |
| 🇦🇱 Albania | $2500 | $3125 | $300000 |
| 🇩🇿 Algeria | $2762.5 | $3453 | $331500 |
| 🇦🇴 Angola | $2762.5 | $3453 | $331500 |
| 🇦🇷 Argentina | $3230 | $4038 | $387600 |
| 🇦🇲 Armenia | $2625 | $3281 | $315000 |
| 🇦🇫 Afghanistan | $3712.5 | $4641 | $445500 |
| 🇧🇩 Bangladesh | $2625 | $3281 | $315000 |
| 🇧🇭 Bahrain | $3095 | $3869 | $371400 |
| 🇧🇾 Belarus | $2825 | $3531 | $339000 |
| 🇧🇿 Belize | $3155 | $3944 | $378600 |
| 🇧🇪 Belgium | $2575 | $3219 | $309000 |
| 🇧🇬 Bulgaria | $2400 | $3000 | $288000 |
| 🇧🇴 Bolivia | $3230 | $4038 | $387600 |
| 🇧🇦 Bosnia and Herzegovina | $2575 | $3219 | $309000 |
| 🇧🇷 Brazil | $3120 | $3900 | $374400 |
| 🇭🇺 Hungary | $2575 | $3219 | $309000 |
| 🇻🇪 Venezuela | $3230 | $4038 | $387600 |
| 🇻🇳 Vietnam | $2625 | $3281 | $315000 |
| 🇬🇭 Ghana | $2762.5 | $3453 | $331500 |
| 🇬🇹 Guatemala | $3230 | $4038 | $387600 |
| 🇬🇳 Guinea | $2762.5 | $3453 | $331500 |
| 🇩🇪 Germany | $2475 | $3094 | $297000 |
| 🇭🇳 Honduras | $3230 | $4038 | $387600 |
| 🇭🇰 Hong Kong S.A.R. | $2625 | $3281 | $315000 |
| 🇬🇷 Greece | $2575 | $3219 | $309000 |
| 🇬🇪 Georgia | $3712.5 | $4641 | $445500 |
| 🇩🇰 Denmark | $2400 | $3000 | $288000 |
| 🇩🇴 Dominican Republic | $3230 | $4038 | $387600 |
| 🇪🇬 Egypt | $2762.5 | $3453 | $331500 |
| 🇿🇲 Zambia | $2762.5 | $3453 | $331500 |
| 🇿🇼 Zimbabwe | $2762.5 | $3453 | $331500 |
| 🇮🇱 Israel | $2625 | $3281 | $315000 |
| 🇮🇳 India | $3712.5 | $4641 | $445500 |
| 🇮🇩 Indonesia | $3095 | $3869 | $371400 |
| 🇯🇴 Jordan | $2625 | $3281 | $315000 |
| 🇮🇶 Iraq | $2625 | $3281 | $315000 |
| 🇮🇷 Iran | $3095 | $3869 | $371400 |
| 🇮🇪 Ireland | $2500 | $3125 | $300000 |
| 🇮🇸 Iceland | $2575 | $3219 | $309000 |
| 🇪🇸 Spain | $2500 | $3125 | $300000 |
| 🇮🇹 Italy | $2400 | $3000 | $288000 |
| 🇾🇪 Yemen | $2625 | $3281 | $315000 |
| 🇰🇿 Kazakhstan | $2625 | $3281 | $315000 |
| 🇰🇭 Cambodia | $3095 | $3869 | $371400 |
| 🇨🇲 Cameroon | $2762.5 | $3453 | $331500 |
| 🇨🇦 Canada | $3230 | $4038 | $387600 |
| 🇶🇦 Qatar | $2625 | $3281 | $315000 |
| 🇰🇪 Kenya | $2762.5 | $3453 | $331500 |
| 🇨🇾 Cyprus | $2625 | $3281 | $315000 |
| 🇰🇬 Kyrgyzstan | $3095 | $3869 | $371400 |
| 🇨🇳 China | $3712.5 | $4641 | $445500 |
| 🇨🇴 Colombia | $3230 | $4038 | $387600 |
| 🇰🇷 Korea South | $2625 | $3281 | $315000 |
| 🇨🇷 Costa Rica | $3355 | $4194 | $402600 |
| 🇨🇮 Cote D'Ivoire (Ivory Coast) | $2762.5 | $3453 | $331500 |
| 🇨🇺 Cuba | $3230 | $4038 | $387600 |
| 🇰🇼 Kuwait | $2625 | $3281 | $315000 |
| 🇱🇻 Latvia | $2575 | $3219 | $309000 |
| 🇱🇧 Lebanon | $2625 | $3281 | $315000 |
| 🇱🇾 Libya | $2762.5 | $3453 | $331500 |
| 🇱🇹 Lithuania | $2500 | $3125 | $300000 |
| 🇱🇮 Liechtenstein | $2400 | $3000 | $288000 |
| 🇱🇺 Luxembourg | $2500 | $3125 | $300000 |
| 🇲🇾 Malaysia | $2625 | $3281 | $315000 |
| 🇲🇹 Malta | $2500 | $3125 | $300000 |
| 🇲🇦 Morocco | $2762.5 | $3453 | $331500 |
| 🇲🇽 Mexico | $3155 | $3944 | $378600 |
| 🇲🇩 Moldova | $2400 | $3000 | $288000 |
| 🇲🇨 Monaco | $2475 | $3094 | $297000 |
| 🇲🇳 Mongolia | $2625 | $3281 | $315000 |
| 🇲🇲 Myanmar | $2625 | $3281 | $315000 |
| 🇳🇦 Namibia | $2762.5 | $3453 | $331500 |
| 🇳🇵 Nepal | $2625 | $3281 | $315000 |
| 🇳🇬 Nigeria | $2762.5 | $3453 | $331500 |
| 🇳🇱 Netherlands | $2575 | $3219 | $309000 |
| 🇳🇮 Nicaragua | $3155 | $3944 | $378600 |
| 🇳🇿 New Zealand | $3345 | $4181 | $401400 |
| 🇳🇴 Norway | $2400 | $3000 | $288000 |
| 🇦🇪 United Arab Emirates | $3095 | $3869 | $371400 |
| 🇴🇲 Oman | $2625 | $3281 | $315000 |
| 🇵🇰 Pakistan | $2625 | $3281 | $315000 |
| 🇵🇦 Panama | $3230 | $4038 | $387600 |
| 🇵🇾 Paraguay | $3155 | $3944 | $378600 |
| 🇵🇪 Peru | $3230 | $4038 | $387600 |
| 🇵🇱 Poland | $2575 | $3219 | $309000 |
| 🇵🇹 Portugal | $2500 | $3125 | $300000 |
| 🇷🇺 Russia | $2575 | $3219 | $309000 |
| 🇷🇴 Romania | $2475 | $3094 | $297000 |
| 🇸🇦 Saudi Arabia | $2625 | $3281 | $315000 |
| 🇸🇳 Senegal | $2762.5 | $3453 | $331500 |
| 🇷🇸 Serbia | $2575 | $3219 | $309000 |
| 🇸🇬 Singapore | $3095 | $3869 | $371400 |
| 🇸🇾 Syria | $3095 | $3869 | $371400 |
| 🇸🇰 Slovakia | $2500 | $3125 | $300000 |
| 🇸🇮 Slovenia | $2500 | $3125 | $300000 |
| 🇬🇧 United Kingdom | $2475 | $3094 | $297000 |
| 🇸🇩 Sudan | $2762.5 | $3453 | $331500 |
| 🇺🇸 United States | $2902.5 | $3628 | $348300 |
| 🇹🇯 Tajikistan | $2625 | $3281 | $315000 |
| 🇹🇭 Thailand | $2625 | $3281 | $315000 |
| 🇹🇼 Taiwan | $3712.5 | $4641 | $445500 |
| 🇹🇿 Tanzania | $2762.5 | $3453 | $331500 |
| 🇹🇹 Trinidad And Tobago | $2675 | $3344 | $321000 |
| 🇹🇳 Tunisia | $2762.5 | $3453 | $331500 |
| 🇹🇲 Turkmenistan | $2625 | $3281 | $315000 |
| 🇹🇷 Turkey | $2625 | $3281 | $315000 |
| 🇺🇬 Uganda | $2762.5 | $3453 | $331500 |
| 🇺🇿 Uzbekistan | $2625 | $3281 | $315000 |
| 🇺🇦 Ukraine | $2500 | $3125 | $300000 |
| 🇺🇾 Uruguay | $2675 | $3344 | $321000 |
| 🇫🇴 Faroe Islands | $2575 | $3219 | $309000 |
| 🇵🇭 Philippines | $2625 | $3281 | $315000 |
| 🇫🇮 Finland | $2500 | $3125 | $300000 |
| 🇫🇷 France | $2575 | $3219 | $309000 |
| 🇭🇷 Croatia (Hrvatska) | $2575 | $3219 | $309000 |
| 🇲🇪 Montenegro | $2575 | $3219 | $309000 |
| 🇨🇿 Czech Republic | $2475 | $3094 | $297000 |
| 🇨🇱 Chile | $3355 | $4194 | $402600 |
| 🇨🇭 Switzerland | $2575 | $3219 | $309000 |
| 🇸🇪 Sweden | $2500 | $3125 | $300000 |
| 🇱🇰 Sri Lanka | $2625 | $3281 | $315000 |
| 🇪🇨 Ecuador | $3155 | $3944 | $378600 |
| 🇦🇸 American Samoa | $3345 | $4181 | $401400 |
| 🇸🇻 El Salvador | $3230 | $4038 | $387600 |
| 🇪🇪 Estonia | $2575 | $3219 | $309000 |
| 🇪🇹 Ethiopia | $2762.5 | $3453 | $331500 |
| 🇿🇦 South Africa | $2762.5 | $3453 | $331500 |
| 🇯🇵 Japan | $3095 | $3869 | $371400 |
| 🇦🇩 Andorra | $2500 | $3125 | $300000 |
| 🇦🇬 Antigua And Barbuda | $3155 | $3944 | $378600 |
| 🇧🇸 Bahamas, The | $3155 | $3944 | $378600 |
| 🇧🇧 Barbados | $3230 | $4038 | $387600 |
| 🇧🇹 Bhutan | $3095 | $3869 | $371400 |
| 🇧🇼 Botswana | $2762.5 | $3453 | $331500 |
| 🇸🇧 Solomon Islands | $3345 | $4181 | $401400 |
| 🇧🇳 Brunei | $2625 | $3281 | $315000 |
| 🇧🇮 Burundi | $2762.5 | $3453 | $331500 |
| 🇨🇻 Cabo Verde | $2762.5 | $3453 | $331500 |
| 🇨🇫 Central African Republic | $2762.5 | $3453 | $331500 |
| 🇹🇩 Chad | $2762.5 | $3453 | $331500 |
| 🇰🇲 Comoros | $2762.5 | $3453 | $331500 |
| 🇧🇯 Benin | $2762.5 | $3453 | $331500 |
| 🇩🇲 Dominica | $3230 | $4038 | $387600 |
| 🇬🇶 Equatorial Guinea | $2762.5 | $3453 | $331500 |
| 🇪🇷 Eritrea | $2762.5 | $3453 | $331500 |
| 🇫🇯 Fiji | $3345 | $4181 | $401400 |
| 🇩🇯 Djibouti | $2762.5 | $3453 | $331500 |
| 🇬🇦 Gabon | $2762.5 | $3453 | $331500 |
| 🇬🇲 Gambia, The | $2762.5 | $3453 | $331500 |
| 🇰🇮 Kiribati | $3345 | $4181 | $401400 |
| 🇬🇩 Grenada | $3355 | $4194 | $402600 |
| 🇬🇺 Guam | $3345 | $4181 | $401400 |
| 🇬🇾 Guyana | $3230 | $4038 | $387600 |
| 🇭🇹 Haiti | $3120 | $3900 | $374400 |
| 🇯🇲 Jamaica | $3230 | $4038 | $387600 |
| 🇰🇵 Korea, North | $2625 | $3281 | $315000 |
| 🇱🇸 Lesotho | $2762.5 | $3453 | $331500 |
| 🇲🇬 Madagascar | $2762.5 | $3453 | $331500 |
| 🇲🇼 Malawi | $2762.5 | $3453 | $331500 |
| 🇲🇻 Maldives | $2625 | $3281 | $315000 |
| 🇲🇱 Mali | $2762.5 | $3453 | $331500 |
| 🇲🇺 Mauritius | $2762.5 | $3453 | $331500 |
| 🇨🇼 Curaçao | $3230 | $4038 | $387600 |
| 🇦🇼 Aruba | $3120 | $3900 | $374400 |
| 🇻🇺 Vanuatu | $3345 | $4181 | $401400 |
| 🇳🇪 Niger | $2762.5 | $3453 | $331500 |
| 🇲🇵 Northern Mariana Islands | $3345 | $4181 | $401400 |
| 🇫🇲 Micronesia, Federated States Of | $3345 | $4181 | $401400 |
| 🇲🇭 Marshall Islands | $3345 | $4181 | $401400 |
| 🇵🇬 Papua New Guinea | $3345 | $4181 | $401400 |
| 🇬🇼 Guinea-Bissau | $2762.5 | $3453 | $331500 |
| 🇹🇱 Timor-Leste | $2625 | $3281 | $315000 |
| 🇷🇼 Rwanda | $2762.5 | $3453 | $331500 |
| 🇰🇳 Saint Kitts And Nevis | $3155 | $3944 | $378600 |
| 🇱🇨 Saint Lucia | $3230 | $4038 | $387600 |
| 🇻🇨 Saint Vincent And The Grenadines | $3355 | $4194 | $402600 |
| 🇸🇲 San Marino | $2500 | $3125 | $300000 |
| 🇸🇹 Sao Tome And Principe | $2762.5 | $3453 | $331500 |
| 🇸🇱 Sierra Leone | $2762.5 | $3453 | $331500 |
| 🇸🇴 Somalia | $2762.5 | $3453 | $331500 |
| 🇸🇸 South Sudan | $2762.5 | $3453 | $331500 |
| 🇸🇷 Suriname | $3230 | $4038 | $387600 |
| 🇸🇿 Swaziland | $2762.5 | $3453 | $331500 |
| 🇹🇬 Togo | $2762.5 | $3453 | $331500 |
| 🇹🇴 Tonga | $3345 | $4181 | $401400 |
| 🇹🇻 Tuvalu | $3345 | $4181 | $401400 |
| 🇧🇫 Burkina Faso | $2762.5 | $3453 | $331500 |
| 🇼🇸 Samoa | $3345 | $4181 | $401400 |
ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, oil tankers for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.
