Corning Gorilla® Glass 4 Touch Screen Glass price 1834 per MT

Physical Properties
Density
2.42 g/cc
Thickness
400 - 1000 microns

Mechanical Properties
Vickers Microhardness
489
Vickers Microhardness
596
Modulus of Elasticity
65.8 GPa
Compressive Strength
>= 850 MPa
Poissons Ratio
0.22
Fracture Toughness
0.670 MPa-m½
Shear Modulus
26.0 GPa

Thermal Properties
CTE, linear
8.69 µm/m-°C @Temperature 0.000 - 300 °C
Softening Point
912 °C
Annealing Point
646 °C
Strain Point
596 °C

Optical Properties
Refractive Index
1.49 @Wavelength 590 nm
Refractive Index
1.51 @Wavelength 590 nm
Transmission, Visible
>= 91.5 % @Wavelength 450 - 2100 nm
IR Transmittance
>= 90.0 % @Wavelength 2100 - 2500 nm
IR Transmittance
>= 91.5 % @Wavelength 700 - 2100 nm
UV Transmittance
0.0 % @Wavelength <=250 nm
UV Transmittance
>= 91.5 % @Wavelength 380 nm

Electrical Properties
Dielectric Constant
7.33 @Frequency 2.986e+9 Hz
Dielectric Constant
7.34 @Frequency 2.466e+9 Hz
Dielectric Constant
7.37 @Frequency 1.977e+9 Hz
Dielectric Constant
7.39 @Frequency 1.50e+9 Hz
Dielectric Constant
7.43 @Frequency 9.1e+8 Hz
Dielectric Constant
7.60 @Frequency 5.990e+8 Hz
Dielectric Constant
7.63 @Frequency 4.90e+8 Hz
Dielectric Constant
7.66 @Frequency 3.81e+8 Hz
Dielectric Constant
7.70 @Frequency 2.72e+8 Hz
Dielectric Constant
7.77 @Frequency 1.63e+8 Hz
Dielectric Constant
7.89 @Frequency 5.40e+7 Hz
Dissipation Factor
0.0230 @Frequency 4.90e+8 Hz
Dissipation Factor
0.0240 @Frequency 5.99e+8 Hz
Dissipation Factor
0.0240 @Frequency 9.12e+8 Hz
Dissipation Factor
0.0240 @Frequency 1.63e+8 Hz
Dissipation Factor
0.0240 @Frequency 2.72e+8 Hz
Dissipation Factor
0.0240 @Frequency 3.81e+8 Hz
Dissipation Factor
0.0250 @Frequency 1.499e+9 Hz
Dissipation Factor
0.0250 @Frequency 1.977e+9 Hz
Dissipation Factor
0.0260 @Frequency 2.466e+9 Hz
Dissipation Factor
0.0260 @Frequency 5.4e+7 Hz
Dissipation Factor
0.0270 @Frequency 2.986e+9 Hz

Descriptive Properties
Photo-elastic Constant
30.3 nm/cm/MPa

Alternative products

Hexcel® Redux® 810 Two-Part Epoxy Paste Adhesive accurate 99%

$ 2584/MT

Density: 1.02 g/cc @Temperature 25.0 °C
Density: 1.11 g/cc @Temperature 25.0 °C
Density: 1.15 g/cc @Temperature 25.0 °C
Viscosity: 4000 - 8000 cP @Temperature 25.0 °C
Viscosity: 80000 - 90000 cP @Temperature 25.0 °C

DuPont Teijin Films Mylar® A Polyester Film, 1200 Gauge accurate 99%

$ 1518/MT

Density: 1.39 g/cc
Viscosity Measurement: 0.56
Tensile Modulus: 3.50 GPa
Poissons Ratio: 0.38
Poissons Ratio: 0.58

DuPont Teijin Films Mylar® A Polyester Film, 200 Gauge accurate 99%

$ 1476/MT

Density: 1.39 g/cc
Viscosity Measurement: 0.56
Film Elongation at Break, MD: 135 %
Film Elongation at Break, TD: 110 %
Tensile Modulus: 3.50 GPa

DuPont Teijin Films Mylar® A Polyester Film, 500 Gauge accurate 99%

$ 2436/MT

Density: 1.39 g/cc
Viscosity Measurement: 0.56
Film Elongation at Break, MD: 140 %
Film Elongation at Break, TD: 115 %
Tensile Modulus: 3.50 GPa

Ampco Metal AMPCO® 15 Aluminum Bronze, Extruded Rod, 25.4 - 50.8 mm. accurate 99%

$ 2351/MT

Specific Gravity: 7.65 g/cc
Density: 7.64 g/cc
Hardness, Brinell: 170
Hardness, Rockwell B: 87
Tensile Strength, Ultimate: >= 586 MPa

Haynes Multimet® alloy, 12.7-50.8 mm hot-rolled bar, 1185°C heat treatment, water quenched accurate 99%

$ 1603/MT

Density: 8.20 g/cc
Hardness, Brinell: 190
Hardness, Knoop: 211
Hardness, Vickers: 199
Tensile Strength, Ultimate: 767 MPa

Haynes Multimet® alloy, GTAW, 6.35 mm plate accurate 99%

$ 1486/MT

Density: 8.20 g/cc
Tensile Strength, Ultimate: 768 MPa
Elongation at Break: 21 %
Poissons Ratio: 0.298
Poissons Ratio: 0.315 @Temperature 426 °C

Haynes Multimet® alloy, 6.15 mm hot-rolled bar, 30% cold reduction accurate 99%

$ 1593/MT

Density: 8.20 g/cc
Hardness, Brinell: 342
Hardness, Knoop: 371
Hardness, Rockwell C: 37
Hardness, Vickers: 358

Haynes Multimet® alloy, SMAW, 9.5 mm plate accurate 99%

$ 1589/MT

Density: 8.20 g/cc
Tensile Strength, Ultimate: 724 MPa
Elongation at Break: 28 %
Poissons Ratio: 0.298
Poissons Ratio: 0.315 @Temperature 426 °C

Haynes Multimet® alloy, 1.32 mm thick sheet, 1177°C heat treatment, rapid air cooled accurate 99%

$ 1517/MT

Density: 8.20 g/cc
Hardness, Brinell: 159
Hardness, Knoop: 176
Hardness, Rockwell B: 92
Hardness, Vickers: 201

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ship for sale norway. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Corning Gorilla® Glass 4 Touch Screen Glass

Seller from Saint Petersburg – 2021-04-21:

Seller from Saint Petersburg work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2258 per MT

Seller from Manila – 2021-04-04:

Seller from Manila work with company: Solvay, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co., ALIMEX GmbH

Price: $1834 per MT

Seller from Chicago – 2021-04-24:

Seller from Chicago work with company: Solvay, PolyOne Corporation, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2416 per MT