DuPont Performance Polymers Minlon® EFE6096 GY090A Nylon 66 (Unverified Data**) price 1566 per MT

Physical Properties
Density
1.23 g/cc
Filler Content
15 %
Water Absorption
2.1 % @Temperature 23.0 °C
Water Absorption
7.7 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow
0.011 cm/cm @Thickness 2.00 mm
Linear Mold Shrinkage, Transverse
0.011 cm/cm @Thickness 2.00 mm

Mechanical Properties
Tensile Strength at Break
52.0 MPa @Temperature 23.0 °C
Tensile Strength at Break
76.0 MPa @Temperature 23.0 °C
Tensile Strength
79.0 MPa @Temperature 23.0 °C
Elongation at Break
17 % @Temperature 23.0 °C
Elongation at Break
21 % @Temperature 23.0 °C
Elongation at Break
>= 50 % @Temperature 23.0 °C
Elongation at Break
52 % @Temperature 23.0 °C
Tensile Modulus
1.80 GPa @Temperature 23.0 °C
Tensile Modulus
3.80 GPa @Temperature 23.0 °C
Flexural Modulus
3.72 GPa @Temperature 23.0 °C
Izod Impact, Notched
0.640 J/cm @Temperature 23.0 °C
Izod Impact, Notched (ISO)
6.00 kJ/m² @Temperature 23.0 °C
Izod Impact, Notched (ISO)
11.0 kJ/m² @Temperature 23.0 °C
Charpy Impact Unnotched
0.600 J/cm² @Temperature -30.0 °C
Charpy Impact Unnotched
10.0 J/cm² @Temperature 23.0 °C
Charpy Impact Unnotched
NB @Temperature 23.0 °C
Charpy Impact, Notched
0.750 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
1.50 J/cm² @Temperature 23.0 °C

Thermal Properties
Melting Point
263 °C
Deflection Temperature at 1.8 MPa (264 psi)
75.0 °C

Processing Properties
Melt Temperature
285 - 305 °C
Melt Temperature
295 °C
Mold Temperature
70.0 - 120 °C
Mold Temperature
100 °C
Drying Temperature
80.0 °C
Dry Time
2.00 - 4.00 hour
Moisture Content
<= 0.20 %

Descriptive Properties
Drying Recommended
Yes, if moisture content of resin exceeds recommended level
Filler
Mineral filler
Forms
Pellets
Generic
Nylon 66
Heat Stabilized
Yes
Material Status
Current
Part Marking Code
>PA66-IMD15<
Polymer Family
Polyamide
Polymer Type
PA66
Processing Method
Injection Molding
Product Category
Low Warp Resins
Product Category
Mineral Reinforced Resins
Resin Identification
PA66-IMD15
RoHS Compliance
Contact Manufacturer

Alternative products

DuPont Performance Polymers Minlon® 10B40HS1 BK061 Nylon 66 (Unverified Data**) accurate 77%

$ 1633/MT

Specific Gravity: 1.51 g/cc
Density: 1.51 g/cc
Filler Content: 40 %
Linear Mold Shrinkage: 0.0040 cm/cm @Thickness 1.60 mm
Linear Mold Shrinkage: 0.0040 cm/cm @Thickness 3.20 mm

DuPont Performance Polymers Zytel® FG7301 NC010 Nylon 6 (Unverified Data**) accurate 66%

$ 1715/MT

Density: 1.13 g/cc
Water Absorption: 3.0 % @Temperature 23.0 °C
Water Absorption: 9.5 % @Temperature 23.0 °C
Linear Mold Shrinkage: 0.010 cm/cm @Thickness 3.00 mm
Tensile Strength, Yield: 50.0 MPa @Temperature 23.0 °C

DuPont Performance Polymers Hytrel® G3548L TPC-ET (Unverified Data**) accurate 66%

$ 2237/MT

Specific Gravity: 1.15 g/cc
Density: 1.15 g/cc
Water Absorption: 5.0 % @Temperature 23.0 °C
Water Absorption: 5.0 % @Temperature 23.0 °C
Linear Mold Shrinkage: 0.0050 cm/cm

DuPont Performance Polymers Zytel® ST7301 BK356 Nylon 6 (Unverified Data**) accurate 66%

$ 1467/MT

Density: 1.06 g/cc
Linear Mold Shrinkage, Flow: 0.013 cm/cm @Thickness 2.00 mm
Tensile Strength, Yield: 30.0 MPa @Temperature 23.0 °C
Tensile Strength, Yield: 48.0 MPa @Temperature 23.0 °C
Elongation at Break: 45 % @Temperature 23.0 °C

DuPont Performance Polymers Zytel® 7301 NC010 Nylon 6 (Unverified Data**) accurate 66%

$ 2395/MT

Specific Gravity: 1.13 g/cc
Density: 1.13 g/cc
Water Absorption: 3.0 % @Temperature 23.0 °C
Water Absorption: 9.5 % @Temperature 23.0 °C
Linear Mold Shrinkage: 0.010 cm/cm @Thickness 3.00 mm

DuPont Performance Polymers Zytel® FN714 NC010A Nylon 66 accurate 77%

$ 2532/MT

Density: 1.02 g/cc
Tensile Strength at Break: 29.0 MPa @Temperature 23.0 °C
Tensile Strength, Yield: 29.0 MPa @Temperature 23.0 °C
Elongation at Break: >= 50 % @Temperature 23.0 °C
Elongation at Break: 190 % @Temperature 23.0 °C

DuPont Performance Polymers Zytel® ST811HS BK038 Nylon 6 (Unverified Data**) accurate 66%

$ 1610/MT

Density: 1.05 g/cc
Linear Mold Shrinkage, Flow: 0.0090 cm/cm @Thickness 2.00 mm
Linear Mold Shrinkage, Transverse: 0.014 cm/cm @Thickness 2.00 mm
Tensile Strength at Break: 44.0 MPa @Temperature 23.0 °C
Elongation at Break: 200 % @Temperature 23.0 °C

DuPont Performance Polymers Zytel® FE310001 NC010 Nylon 612 accurate 66%

$ 1731/MT

Density: 1.06 g/cc
Linear Mold Shrinkage, Flow: 0.013 cm/cm @Thickness 2.00 mm
Linear Mold Shrinkage, Transverse: 0.013 cm/cm @Thickness 2.00 mm
Tensile Strength, Yield: 58.0 MPa @Temperature 23.0 °C
Tensile Modulus: 2.25 GPa @Temperature 23.0 °C

DuPont Performance Polymers Zytel® ST7301 NC010 Nylon 6 (Unverified Data**) accurate 66%

$ 1727/MT

Density: 1.06 g/cc
Linear Mold Shrinkage, Flow: 0.012 cm/cm @Thickness 2.00 mm
Tensile Strength, Yield: 29.0 MPa @Temperature 23.0 °C
Tensile Strength, Yield: 48.0 MPa @Temperature 23.0 °C
Elongation at Break: >= 50 % @Temperature 23.0 °C

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, ships sales. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

2 prices for DuPont Performance Polymers Minlon® EFE6096 GY090A Nylon 66 (Unverified Data**)

Seller from Washington – 2021-07-16:

Seller from Washington work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2086 per MT

Seller from Khartoum – 2021-08-11:

Seller from Khartoum work with company: Solvay, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1566 per MT