Eurostar Staramide AG4 PA66, 20% Glass Filled, Injection Molded price 1456 per MT

Physical Properties
Density
1.26 g/cc
Water Absorption at Saturation
5.5 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow
0.0020 - 0.0050 cm/cm

Mechanical Properties
Hardness, Rockwell L
112
Tensile Strength at Break
130 MPa
Elongation at Break
3.5 %
Tensile Modulus
7.00 GPa
Flexural Strength
190 MPa
Flexural Modulus
6.80 GPa
Izod Impact, Notched (ISO)
4.00 kJ/m² @Temperature -40.0 °C
Izod Impact, Notched (ISO)
5.00 kJ/m² @Temperature -30.0 °C
Izod Impact, Notched (ISO)
6.00 kJ/m² @Temperature 23.0 °C
Charpy Impact Unnotched
6.50 J/cm²

Thermal Properties
CTE, linear, Parallel to Flow
31.0 µm/m-°C @Temperature 23.0 - 60.0 °C
CTE, linear, Transverse to Flow
95.0 µm/m-°C @Temperature 23.0 - 60.0 °C
Thermal Conductivity
0.330 W/m-K
Deflection Temperature at 0.46 MPa (66 psi)
245 °C
Deflection Temperature at 1.8 MPa (264 psi)
230 °C
Vicat Softening Point
255 °C
UL RTI, Electrical
65.0 °C @Thickness 0.750 mm
UL RTI, Electrical
65.0 °C @Thickness 3.00 mm
UL RTI, Mechanical with Impact
65.0 °C @Thickness 0.750 mm
UL RTI, Mechanical with Impact
65.0 °C @Thickness 3.00 mm
UL RTI, Mechanical without Impact
65.0 °C @Thickness 0.750 mm
UL RTI, Mechanical without Impact
65.0 °C @Thickness 3.00 mm
Flammability, UL94
HB @Thickness 0.750 mm
Flammability, UL94
HB @Thickness 3.00 mm
Flame Spread
5.00 mm/min @Thickness 3.00 mm
Flame Spread
10.0 mm/min @Thickness 2.00 mm
Oxygen Index
27 %

Electrical Properties
Volume Resistivity
>= 1.00e+16 ohm-cm
Surface Resistance
>= 1.00e+16 ohm
Dielectric Constant
3.2 @Frequency 1.00e+6 Hz
Dielectric Constant
3.4 @Frequency 50.0 - 60.0 Hz
Dielectric Strength
19.0 kV/mm @Thickness 3.20 mm
Dissipation Factor
0.0068 @Frequency 50.0 - 60.0 Hz
Dissipation Factor
0.015 @Frequency 1.00e+6 Hz
Comparative Tracking Index
450 V
Comparative Tracking Index
550 V

Processing Properties
Rear Barrel Temperature
260 - 280 °C
Middle Barrel Temperature
270 - 280 °C
Front Barrel Temperature
270 - 290 °C
Melt Temperature
270 - 290 °C
Mold Temperature
60.0 - 90.0 °C
Drying Temperature
75.0 - 85.0 °C
Dry Time
4.00 - 6.00 hour
Moisture Content
0.20 %

Descriptive Properties
UL f1
f1

Alternative products

BASF Styrodur® 3035 CN Extruded Rigid Polystyrene Foam (Europe) accurate 60%

$ 1548/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 100 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Eurostar Staramide AG3K PA66, 15% Glass Filled, Injection Molded accurate 66%

$ 1703/MT

Density: 1.23 g/cc
Water Absorption at Saturation: 7.0 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
Tensile Strength at Break: 125 MPa
Elongation at Break: 3.0 %

BASF Styrodur® 2800 C Extruded Rigid Polystyrene Foam (Europe) accurate 60%

$ 2010/MT

Density: 0.0300 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 5.0 %
Water Vapor Transmission: 80.0 - 200 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 4000 CS Extruded Rigid Polystyrene Foam (Europe) accurate 60%

$ 2342/MT

Density: 0.0350 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 80.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

BASF Styrodur® 3035 CS Extruded Rigid Polystyrene Foam (Europe) accurate 60%

$ 2271/MT

Density: 0.0330 g/cc
Water Absorption: 0.20 %
Water Absorption: <= 3.0 %
Water Vapor Transmission: 50.0 - 150 g/m²/day
Deformation: <= 5.0 % @Pressure 0.0400 MPa, Temperature 70.0 °C

Solvay Specialty Polymers Amodel® AT-1116 HS Polyphthalamide (PPA) (Unverified Data**) accurate 60%

$ 1484/MT

Density: 1.28 g/cc
Filler Content: 16 %
Water Absorption: 0.20 % @Time 86400 sec
Linear Mold Shrinkage, Flow: 0.0060 cm/cm
Linear Mold Shrinkage, Transverse: 0.0060 cm/cm

Celanese Celstran® PP-GF30-02 AF 3001 PP, 30% Glass Reinforced accurate 66%

$ 1557/MT

Specific Gravity: 1.12 g/cc
Density: 1.12 g/cc
Tensile Strength at Break: 108 MPa
Tensile Strength at Break: 130 MPa
Tensile Strength at Break: 66.9 MPa @Temperature 93.3 °C

Eurostar Staramide AG4K PA66, 20% Glass Filled, Injection Molded accurate 88%

$ 2494/MT

Density: 1.26 g/cc
Water Absorption at Saturation: 5.5 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm
Hardness, Rockwell L: 112
Tensile Strength at Break: 130 MPa

Eurostar Staramide AG3 PA66, 15% Glass Filled, Injection Molded accurate 66%

$ 1914/MT

Density: 1.23 g/cc
Water Absorption at Saturation: 7.0 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.0040 - 0.0080 cm/cm
Tensile Strength at Break: 125 MPa
Elongation at Break: 3.0 %

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, vessels for sale norway. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for Eurostar Staramide AG4 PA66, 20% Glass Filled, Injection Molded

Seller from Belo Horizonte – 2021-03-19:

Seller from Belo Horizonte work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1456 per MT

Seller from Hanoi – 2021-08-05:

Seller from Hanoi work with company: 3M, Solvay, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics)

Price: $2400 per MT

Seller from Guangzhou – 2021-05-27:

Seller from Guangzhou work with company: 3M, SABIC Innovative Plastics (GE Plastics), LG Chemical, ALIMEX GmbH

Price: $1699 per MT