Eurostar Staramide B28 PA6, Injection Molded price 1552 per MT

Physical Properties
Density
1.14 g/cc
Moisture Absorption
2.60 % @Temperature 23.0 °C
Water Absorption at Saturation
10 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow
0.011 - 0.015 cm/cm

Mechanical Properties
Hardness, Rockwell R
120
Tensile Strength, Yield
70.0 MPa
Elongation at Break
>= 15 %
Elongation at Yield
3.5 %
Tensile Modulus
2.70 GPa
Flexural Yield Strength
85.0 MPa
Flexural Modulus
2.40 GPa
Izod Impact, Notched (ISO)
3.00 kJ/m² @Temperature -40.0 °C
Izod Impact, Notched (ISO)
4.00 kJ/m² @Temperature -20.0 °C
Izod Impact, Notched (ISO)
5.00 kJ/m² @Temperature 23.0 °C
Charpy Impact Unnotched
>= 10.0 J/cm² @Temperature -30.0 °C
Charpy Impact Unnotched
>= 27.0 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.400 J/cm² @Temperature -30.0 °C
Charpy Impact, Notched
0.500 J/cm² @Temperature 23.0 °C

Thermal Properties
CTE, linear, Parallel to Flow
80.0 µm/m-°C @Temperature 23.0 - 60.0 °C
CTE, linear, Transverse to Flow
80.0 µm/m-°C @Temperature 23.0 - 60.0 °C
Thermal Conductivity
0.330 W/m-K
Hot Ball Pressure Test
123 - 127 °C
Deflection Temperature at 0.46 MPa (66 psi)
180 °C
Deflection Temperature at 1.8 MPa (264 psi)
60.0 °C
Vicat Softening Point
200 °C
Vicat Softening Point
210 °C
UL RTI, Electrical
65.0 °C
UL RTI, Mechanical with Impact
65.0 °C
UL RTI, Mechanical without Impact
65.0 °C
Flammability, UL94
HB @Thickness 0.750 mm
Flammability, UL94
HB @Thickness 3.00 mm
Oxygen Index
24 %

Electrical Properties
Volume Resistivity
>= 1.00e+16 ohm-cm
Surface Resistance
>= 1.00e+16 ohm
Dielectric Constant
3.0 @Frequency 1.00e+6 Hz
Dielectric Constant
3.3 @Frequency 50.0 - 60.0 Hz
Dielectric Strength
16.0 kV/mm @Thickness 3.20 mm
Dissipation Factor
0.0058 @Frequency 50.0 - 60.0 Hz
Dissipation Factor
0.018 @Frequency 1.00e+6 Hz
Comparative Tracking Index
600 V
Comparative Tracking Index
600 V

Processing Properties
Zone 1
230 - 240 °C
Zone 2
240 - 250 °C
Zone 3
250 - 260 °C
Melt Temperature
250 - 260 °C
Mold Temperature
60.0 - 80.0 °C
Drying Temperature
75.0 - 85.0 °C @Time 14400 - 21600 sec
Moisture Content
0.20 %

Alternative products

Eurostar Staramide A28K PA66, Heat Stabilized, Injection Molding accurate 51%

$ 2443/MT

Density: 1.14 g/cc
Moisture Absorption: 2.00 % @Temperature 23.0 °C
Water Absorption at Saturation: 8.5 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.016 - 0.020 cm/cm
Hardness, Rockwell L: 118

Eurostar Staramide B40 PA6, Extrusion accurate 77%

$ 2478/MT

Density: 1.13 g/cc
Moisture Absorption: 2.35 % @Temperature 23.0 °C
Water Absorption at Saturation: 10 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.011 - 0.015 cm/cm
Hardness, Rockwell R: 121

Eurostar Starflam B28UL PA6, Flame Retardant, Injection Molded accurate 51%

$ 1659/MT

Density: 1.13 g/cc
Moisture Absorption: 2.60 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.012 - 0.016 cm/cm
Hardness, Rockwell R: 122
Tensile Strength at Break: 80.0 MPa

Eurostar Staramide A28N PA66, Nucleated, Injection Molding accurate 66%

$ 1655/MT

Density: 1.14 g/cc
Moisture Absorption: 2.00 % @Temperature 23.0 °C
Water Absorption at Saturation: 8.5 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.016 - 0.020 cm/cm
Hardness, Rockwell L: 118

Eurostar Staramide B28H PA6, Heat Stabilized, Injection Molded accurate 99%

$ 2256/MT

Density: 1.14 g/cc
Moisture Absorption: 2.60 % @Temperature 23.0 °C
Water Absorption at Saturation: 10 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.011 - 0.015 cm/cm
Hardness, Rockwell R: 120

Eurostar Staramide B28N PA6, Nucleated, Injection Molded accurate 99%

$ 2120/MT

Density: 1.14 g/cc
Moisture Absorption: 2.60 % @Temperature 23.0 °C
Water Absorption at Saturation: 10 % @Temperature 23.0 °C
Linear Mold Shrinkage, Flow: 0.011 - 0.015 cm/cm
Hardness, Rockwell R: 120

SABIC Innovative Plastics NORYL PVX0800 PPE accurate 47%

$ 1863/MT

Specific Gravity: 1.11 g/cc
Moisture Absorption: 0.0700 %
Viscosity: 98000 cP
Melt Flow: 6.0 g/10 min @Load 5.00 kg, Temperature 230 °C
Melt Index of Compound: 22 g/10 min @Load 5.00 kg, Temperature 260 °C

BASF Ultramid® 8202 HS PA6 (Dry) accurate 55%

$ 1640/MT

Density: 0.932 g/cc
Density: 1.13 g/cc
Water Absorption: 1.6 %
Water Absorption: 9.5 %
Moisture Absorption at Equilibrium: 2.7 %

BASF Ultramid® 8202 PA6 (Dry) accurate 55%

$ 1824/MT

Density: 0.932 g/cc
Density: 1.13 g/cc
Water Absorption: 1.6 %
Water Absorption: 9.5 %
Moisture Absorption at Equilibrium: 2.7 %

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, shipsforsale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for Eurostar Staramide B28 PA6, Injection Molded

Seller from Sūrat – 2021-06-25:

Seller from Sūrat work with company: Solvay, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $1564 per MT

Seller from Jakarta – 2021-03-07:

Seller from Jakarta work with company: Solvay, RTP Company, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics)

Price: $2280 per MT

Seller from London – 2021-05-26:

Seller from London work with company: 3M, Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics)

Price: $1552 per MT

Seller from Washington – 2021-06-14:

Seller from Washington work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1805 per MT