Hexion Bakelite™ PF 2855 Phenolic Formaldehyde Resin, High Surface Quality, Low Shrinkage, For Electrostatic Coating, Dishwasher Proof, UL Listed price 1985 per MT

Physical Properties
Density
1.51 g/cc
Apparent Bulk Density
0.770 g/cc
Linear Mold Shrinkage, Flow
0.0050 cm/cm

Mechanical Properties
Flexural Strength
90.0 MPa
Flexural Modulus
8.50 GPa
Charpy Impact Unnotched
0.600 J/cm² @Temperature 23.0 °C
Charpy Impact, Notched
0.140 J/cm² @Temperature 23.0 °C

Thermal Properties
Maximum Service Temperature, Air
150 °C
Maximum Service Temperature, Air
230 °C
Deflection Temperature at 8.0 MPa
135 °C
UL RTI, Electrical
150 °C @Thickness 3.00 mm
UL RTI, Mechanical with Impact
150 °C @Thickness 3.00 mm
UL RTI, Mechanical without Impact
150 °C @Thickness 3.00 mm
Flammability, UL94
V-0 @Thickness 3.00 mm
Shrinkage
0.350 % @Temperature 110 °C, Time 605000 sec

Electrical Properties
Volume Resistivity
1.00e+11 ohm-cm
Surface Resistance
1.00e+10 ohm
Dielectric Constant
12 @Frequency 100 Hz
Dielectric Strength
5.00 kV/mm @Thickness 1.00 mm
Dissipation Factor
0.15 @Frequency 100 Hz
Arc Resistance
125 - 130 sec
Hot Wire Ignition, HWI
>= 120 sec @Thickness 3.00 mm
High Amp Arc Ignition, HAI
15 - 30 arcs @Thickness 3.00 mm

Processing Properties
Feed Temperature
60.0 - 75.0 °C
Nozzle Temperature
80.0 - 100 °C
Melt Temperature
80.0 - 100 °C
Mold Temperature
160 - 190 °C
Mold Temperature
160 - 190 °C
Injection Pressure
>= 15.0 MPa
Back Pressure
0.500 - 2.00 MPa
Cure Time
0.167 - 0.333 min
Cure Time
0.333 - 0.667 min

Descriptive Properties
Chromatic Spectrum
All Colors
Creep Rupture Strength
Very Good
Holding Pressure
Approximately 40-60% of injection pressure
Media Resistance
Very Good
Moisture Absorption
15 mg
Reserves by Peak Temperature
Very High
Thermal Expansion
Very Slight

Alternative products

Hexion Bakelite™ PF 2736 Phenolic Formaldehyde Resin, Improved Electrical Properties, Low Shrinkage, UL Listed &nbs accurate 74%

$ 1555/MT

Density: 1.56 g/cc
Apparent Bulk Density: 0.730 g/cc
Linear Mold Shrinkage, Flow: 0.0030 cm/cm
Linear Mold Shrinkage, Flow: 0.0060 cm/cm
Ball Indentation Hardness: 350 MPa

Hexion Bakelite™ PF 14694 Phenolic Formaldehyde Resin, High Surface Quality (discontinued **) accurate 66%

$ 2239/MT

Density: 1.41 g/cc
Apparent Bulk Density: 0.610 g/cc
Linear Mold Shrinkage, Flow: 0.0065 cm/cm
Flexural Strength: 90.0 MPa
Flexural Modulus: 7.50 GPa

Hexion Bakelite™ PF 6501 Phenolic Formaldehyde Resin, Low Shrinkage accurate 66%

$ 1809/MT

Density: 1.60 g/cc
Apparent Bulk Density: 0.640 g/cc
Linear Mold Shrinkage, Flow: 0.0017 cm/cm
Linear Mold Shrinkage, Flow: 0.0018 cm/cm
Ball Indentation Hardness: 400 MPa

Hexion Bakelite™ PF 83 Phenolic Formaldehyde Resin, Special Preparation Cylindrical Pellets (discontinued **) accurate 66%

$ 1895/MT

Density: 1.42 g/cc
Apparent Bulk Density: 0.600 g/cc
Linear Mold Shrinkage, Flow: 0.0035 cm/cm
Ball Indentation Hardness: 250 MPa
Flexural Strength: 90.0 MPa

Hexion Bakelite™ PF 1141 Phenolic Formaldehyde Resin, High Surface Quality, Resistant to High Temperatures, Dishwasher Proof accurate 82%

$ 1530/MT

Density: 1.51 g/cc
Apparent Bulk Density: 0.770 g/cc
Linear Mold Shrinkage, Flow: 0.0050 cm/cm
Ball Indentation Hardness: 350 MPa
Flexural Strength: 90.0 MPa

Hexion Bakelite™ PF 2836 Phenolic Formaldehyde Resin, Improved Electrical Properties, Low Shrinkage, UL Listed &nbs accurate 66%

$ 1481/MT

Density: 1.64 g/cc
Apparent Bulk Density: 0.740 g/cc
Linear Mold Shrinkage, Flow: 0.0040 cm/cm
Tensile Strength at Break: 45.0 MPa
Tensile Modulus: 11.0 GPa

Hexion Bakelite™ PF 31 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 66%

$ 2167/MT

Density: 1.42 g/cc
Apparent Bulk Density: 0.630 g/cc
Linear Mold Shrinkage, Flow: 0.0040 cm/cm
Linear Mold Shrinkage, Flow: 0.0080 cm/cm
Ball Indentation Hardness: 325 MPa

Hexion Bakelite™ X65 Phenolic Formaldehyde Resin, UL Listed (discontinued **) accurate 74%

$ 2324/MT

Density: 1.51 g/cc
Apparent Bulk Density: 0.680 g/cc
Linear Mold Shrinkage, Flow: 0.0055 cm/cm
Linear Mold Shrinkage, Flow: 0.0075 cm/cm
Ball Indentation Hardness: 275 MPa

Hexion Bakelite™ PF 2400 Phenolic Formaldehyde Resin, High Surface Quality, Dishwasher Proof, UL Listed (disc accurate 74%

$ 1511/MT

Density: 1.47 g/cc
Apparent Bulk Density: 0.650 g/cc
Linear Mold Shrinkage, Flow: 0.0035 cm/cm
Linear Mold Shrinkage, Flow: 0.0075 cm/cm
Ball Indentation Hardness: 350 MPa

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, tankers for sale norway. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

2 prices for Hexion Bakelite™ PF 2855 Phenolic Formaldehyde Resin, High Surface Quality, Low Shrinkage, For Electrostatic Coating, Dishwasher Proof, UL Listed

Seller from Hong Kong – 2021-03-23:

Seller from Hong Kong work with company: Techmer ES, SABIC Innovative Plastics (GE Plastics), BASF, ALIMEX GmbH

Price: $1985 per MT

Seller from Shenzhen – 2021-07-15:

Seller from Shenzhen work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), Lehmann & Voss & Co.

Price: $2162 per MT

Would you like to sell Hexion Bakelite™ PF 2855 Phenolic Formaldehyde Resin, High Surface Quality, Low Shrinkage, For Electrostatic Coating, Dishwasher Proof, UL Listed?