LG Chemical LUMID GN1001BF PA66, Halogen Free Flame Retardant price 1622 per MT

Physical Properties
Specific Gravity
1.14 g/cc
Water Absorption
1.3 % @Temperature 23.0 °C, Time 86400 sec
Maximum Moisture Content
0.10
Linear Mold Shrinkage, Flow
0.0090 - 0.016 cm/cm @Thickness 3.20 mm

Mechanical Properties
Hardness, Rockwell R
120
Tensile Strength, Yield
78.5 MPa @Thickness 3.20 mm
Elongation at Break
30 % @Thickness 3.20 mm
Flexural Yield Strength
113 MPa @Thickness 6.40 mm
Flexural Modulus
3.04 GPa @Thickness 6.40 mm
Izod Impact, Notched
0.490 J/cm @Thickness 6.40 mm, Temperature 23.0 °C

Thermal Properties
CTE, linear, Parallel to Flow
70.0 µm/m-°C
Melting Point
260 °C
Deflection Temperature at 0.46 MPa (66 psi)
240 °C @Thickness 6.40 mm
Deflection Temperature at 1.8 MPa (264 psi)
85.0 °C @Thickness 6.40 mm
UL RTI, Electrical
65.0 °C @Thickness 0.750 - 0.820 mm
UL RTI, Mechanical with Impact
65.0 °C @Thickness 0.750 - 0.820 mm
UL RTI, Mechanical without Impact
65.0 °C @Thickness 0.750 - 0.820 mm
Flammability, UL94
V-0 @Thickness >=0.800 mm

Electrical Properties
Volume Resistivity
1.00e+14 ohm-cm
Dielectric Constant
3.0 @Frequency 1.00e+6 Hz
Dielectric Strength
22.0 kV/mm @Thickness 1.00 mm
Arc Resistance
180 - 240 sec
Comparative Tracking Index
>= 600 V
Hot Wire Ignition, HWI
15 - 30 sec @Thickness 0.750 - 0.820 mm
High Amp Arc Ignition, HAI
>= 120 arcs @Thickness 0.750 mm
High Voltage Arc-Tracking Rate, HVTR
25.4 - 50.0 mm/min

Processing Properties
Rear Barrel Temperature
255 - 280 °C
Middle Barrel Temperature
260 - 275 °C
Front Barrel Temperature
260 - 275 °C
Nozzle Temperature
270 - 280 °C
Melt Temperature
260 - 280 °C
Mold Temperature
60.0 - 90.0 °C
Drying Temperature
80.0 - 100 °C
Dry Time
4.00 - 5.00 hour
Back Pressure
29.4 - 58.8 MPa
Screw Speed
30 - 60 rpm

Alternative products

LG Chemical LUMID SG2600B PA6+GF60%, General purpose, Good Surface accurate 68%

$ 2260/MT

Specific Gravity: 1.72 g/cc
Water Absorption: 0.50 %
Maximum Moisture Content: 0.090
Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 120

ChevronTexaco Texatherm® accurate 68%

$ 1472/MT

Specific Gravity: 0.6215 g/cc
Specific Gravity: 0.668 g/cc
Specific Gravity: 0.7032 g/cc
Specific Gravity: 0.7416 g/cc
Specific Gravity: 0.7763 g/cc

LG Chemical LUMID HI2202B(W) PA66+GF20%, High Impact accurate 68%

$ 2535/MT

Specific Gravity: 1.28 g/cc
Water Absorption: 0.80 %
Linear Mold Shrinkage, Flow: 0.0060 - 0.010 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 120
Tensile Strength, Yield: 127 MPa @Thickness 3.20 mm

LG Chemical LUMID GP2251BF PA66+GF25%, Flame Retardant accurate 76%

$ 1679/MT

Specific Gravity: 1.60 g/cc
Water Absorption: 0.60 % @Temperature 23.0 °C, Time 86400 sec
Maximum Moisture Content: 0.090
Linear Mold Shrinkage, Flow: 0.0050 - 0.010 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 120

LG Chemical LUMID GP2301BF PA 66+GF30%, Flame Retardant accurate 76%

$ 1769/MT

Specific Gravity: 1.63 g/cc
Water Absorption: 0.60 % @Temperature 23.0 °C, Time 86400 sec
Maximum Moisture Content: 0.10
Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 120

LG Chemical LUMID GP2339B(W) PA66+GF33%, General Purpose accurate 61%

$ 1822/MT

Specific Gravity: 1.38 g/cc
Water Absorption: 0.70 %
Maximum Moisture Content: 0.10
Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 122

LG Chemical LUMID GP2430B(W) PA66+GF43%, General Purpose accurate 61%

$ 1716/MT

Specific Gravity: 1.50 g/cc
Water Absorption: 0.60 % @Temperature 23.0 °C, Time 86400 sec
Maximum Moisture Content: 0.90
Linear Mold Shrinkage, Flow: 0.0030 - 0.0070 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 122

LG Chemical LUMID GP2500B(W) PA66+GF50%, General Purpose accurate 61%

$ 1923/MT

Specific Gravity: 1.57 g/cc
Water Absorption: 0.50 %
Maximum Moisture Content: 0.090
Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 122

LG Chemical LUMID HI1202B(W) PA66, High Impact accurate 68%

$ 2257/MT

Specific Gravity: 1.07 g/cc
Water Absorption: 1.1 %
Maximum Moisture Content: 0.10
Linear Mold Shrinkage, Flow: 0.014 - 0.018 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 110

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, lng tankers for sale france. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

4 prices for LG Chemical LUMID GN1001BF PA66, Halogen Free Flame Retardant

Seller from Bogotá – 2021-08-14:

Seller from Bogotá work with company: 3M, Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics)

Price: $2059 per MT

Seller from Khartoum – 2021-03-20:

Seller from Khartoum work with company: 3M, Solvay, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2064 per MT

Seller from Montréal – 2021-03-20:

Seller from Montréal work with company: 3M, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2258 per MT

Seller from Abidjan – 2021-03-29:

Seller from Abidjan work with company: Celanese Corporation, Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics)

Price: $1622 per MT