LG Chemical LUMID GP2301BF PA 66+GF30%, Flame Retardant price 1769 per MT

Physical Properties
Specific Gravity
1.63 g/cc
Water Absorption
0.60 % @Temperature 23.0 °C, Time 86400 sec
Maximum Moisture Content
0.10
Linear Mold Shrinkage, Flow
0.0040 - 0.0090 cm/cm @Thickness 3.20 mm

Mechanical Properties
Hardness, Rockwell R
120
Tensile Strength, Yield
172 MPa @Thickness 3.20 mm
Elongation at Break
2.0 % @Thickness 3.20 mm
Flexural Yield Strength
245 MPa @Thickness 3.20 mm
Flexural Modulus
8.53 GPa @Thickness 3.20 mm
Izod Impact, Notched
0.981 J/cm @Thickness 3.20 mm, Temperature 23.0 °C

Thermal Properties
CTE, linear, Parallel to Flow
30.0 µm/m-°C
Melting Point
260 °C
Deflection Temperature at 0.46 MPa (66 psi)
255 °C @Thickness 6.40 mm
Deflection Temperature at 1.8 MPa (264 psi)
250 °C @Thickness 6.40 mm
UL RTI, Electrical
120 °C @Thickness >=0.750 mm
UL RTI, Electrical
120 °C @Thickness >=1.50 mm
UL RTI, Electrical
120 °C @Thickness >=3.00 mm
UL RTI, Mechanical with Impact
100 °C @Thickness >=0.750 mm
UL RTI, Mechanical with Impact
110 °C @Thickness >=1.50 mm
UL RTI, Mechanical with Impact
110 °C @Thickness >=3.00 mm
UL RTI, Mechanical without Impact
100 °C @Thickness >=0.750 mm
UL RTI, Mechanical without Impact
110 °C @Thickness >=1.50 mm
UL RTI, Mechanical without Impact
110 °C @Thickness >=3.00 mm
Flammability, UL94
V-0 @Thickness >=0.750 mm
Flammability, UL94
V-0 @Thickness >=1.50 mm
Flammability, UL94
V-0 @Thickness >=3.00 mm
Glow Wire Test
775 °C @Thickness 0.800 mm
Glow Wire Test
775 °C @Thickness 1.60 mm
Glow Wire Test
775 °C @Thickness 3.20 mm

Electrical Properties
Volume Resistivity
1.00e+14 ohm-cm
Dielectric Constant
3.0 @Frequency 1.00e+6 Hz
Dielectric Strength
22.0 kV/mm @Thickness 1.00 mm
Arc Resistance
0.00 - 60 sec
Comparative Tracking Index
250 V
High Voltage Arc-Tracking Rate, HVTR
80.0 - 150 mm/min

Processing Properties
Rear Barrel Temperature
265 - 275 °C
Middle Barrel Temperature
270 - 280 °C
Front Barrel Temperature
270 - 285 °C
Nozzle Temperature
270 - 290 °C
Melt Temperature
270 - 290 °C
Mold Temperature
80.0 - 110 °C
Drying Temperature
80.0 - 100 °C
Dry Time
4.00 - 5.00 hour
Back Pressure
29.4 - 58.8 MPa
Screw Speed
30 - 60 rpm

Alternative products

LG Chemical LUMID SG2600B PA6+GF60%, General purpose, Good Surface accurate 72%

$ 2260/MT

Specific Gravity: 1.72 g/cc
Water Absorption: 0.50 %
Maximum Moisture Content: 0.090
Linear Mold Shrinkage, Flow: 0.0020 - 0.0050 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 120

ACC QM 2125 QSI Quantum Silicones 25 Durometer Condensation Cure Moldmaking Material accurate 72%

$ 1692/MT

Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.00 g/cc
Specific Gravity: 1.13 g/cc
Specific Gravity: 1.13 g/cc

LG Chemical LUMID GP2330BL PA66+GF33%, General Purpose accurate 72%

$ 1707/MT

Specific Gravity: 1.38 g/cc
Water Absorption: 0.70 %
Maximum Moisture Content: 0.090
Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 122

LG Chemical LUMID GP2330B(W) PA66+GF33%, General Purpose accurate 72%

$ 1713/MT

Specific Gravity: 1.38 g/cc
Water Absorption: 0.70 %
Maximum Moisture Content: 0.090
Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 122

LG Chemical LUMID GN1001BF PA66, Halogen Free Flame Retardant accurate 81%

$ 1622/MT

Specific Gravity: 1.14 g/cc
Water Absorption: 1.3 % @Temperature 23.0 °C, Time 86400 sec
Maximum Moisture Content: 0.10
Linear Mold Shrinkage, Flow: 0.0090 - 0.016 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 120

LG Chemical LUMID GP2151BF PA66+GF15%, Flame Retardant accurate 72%

$ 1989/MT

Specific Gravity: 1.50 g/cc
Water Absorption: 0.60 % @Temperature 23.0 °C, Time 86400 sec
Maximum Moisture Content: 0.090
Linear Mold Shrinkage, Flow: 0.0060 - 0.011 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 120

LG Chemical LUMID GP2251BF PA66+GF25%, Flame Retardant accurate 90%

$ 1679/MT

Specific Gravity: 1.60 g/cc
Water Absorption: 0.60 % @Temperature 23.0 °C, Time 86400 sec
Maximum Moisture Content: 0.090
Linear Mold Shrinkage, Flow: 0.0050 - 0.010 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 120

LG Chemical LUMID GP2339B(W) PA66+GF33%, General Purpose accurate 72%

$ 1822/MT

Specific Gravity: 1.38 g/cc
Water Absorption: 0.70 %
Maximum Moisture Content: 0.10
Linear Mold Shrinkage, Flow: 0.0040 - 0.0090 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 122

LG Chemical LUMID SG2460B PA66+GF46%, General purpose, Good Surface accurate 72%

$ 1472/MT

Specific Gravity: 1.52 g/cc
Water Absorption: 0.60 %
Maximum Moisture Content: 0.090
Linear Mold Shrinkage, Flow: 0.0030 - 0.0070 cm/cm @Thickness 3.20 mm
Hardness, Rockwell R: 120

ShipsFor-Sale.com is a renowned company specializing in the sale of ships. With years of experience in the maritime industry, they have established themselves as a trusted platform for buyers and sellers worldwide. Offering an extensive range of vessels, including cargo ships, tankers, fishing boats, and luxury yachts, crude tanker for sale. Their team of knowledgeable professionals provides expert guidance throughout the buying and selling process, ensuring smooth transactions and customer satisfaction. Whether you are a seasoned ship owner or a first-time buyer, ShipsFor-Sale.com offers a comprehensive selection of vessels and a seamless online experience, making them the go-to destination for ship sales.

Andrey Kutuzov

University of Córdoba (Spain), email: [email protected]

Work with plastics from August, 2015

3 prices for LG Chemical LUMID GP2301BF PA 66+GF30%, Flame Retardant

Seller from Mumbai – 2021-06-07:

Seller from Mumbai work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2212 per MT

Seller from Saint Petersburg – 2021-05-03:

Seller from Saint Petersburg work with company: Solvay, RTP Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $2349 per MT

Seller from Abidjan – 2021-05-22:

Seller from Abidjan work with company: Solvay, Teknor Apex Company, SABIC Innovative Plastics (GE Plastics), ALIMEX GmbH

Price: $1769 per MT